ET2 E35106 iCorona 36 Inch LED Pendant with Wiz RGBW Instruction Manual
- June 3, 2024
- ET2
Table of Contents
ITEM NUMBER: E35106
DESCRIPTION: iCorona 36″ LED Pendant with Wiz RGBW
PLEASE CONSULT AN ELECTRICIAN BEFORE INSTALLATION
LAMPING: CCT WHITE TUNABLE LED INTEGRATED 48W
Vinput: 120-277V
Before Getting Started
Read the instructions carefully prior to assembling the product.
When you open the package with a sharp tool like acutterknife, be careful not
to damage the components inside.
Carefully remove all packaging materials and retain for future use.
Keep all hardware parts and packaging out of reach of small children.
Choose a clean, level, spacious assembly area.
Avoid hard surfaces that may damage the product.
Ensure that you have all required contents for complete assembly.
Take care when lifting. Assemble the product in close proximity to where you
intend to position the item.
Do not over tighten the screws and bolts as this may damage the threads.
Do not let children play with this product.
Risk of suffocation!
Keep any packaging materials away from children.
Lamp Care Instructions
Carefully read through the instruction sheet before assembly and using the
product.
Caution there is a risk of shock. Disconnect from power source before
assembling or cleaning.
WARNING: Wires need to be connected to driver found in canopy and should not be connected directly to power source or a short may occur.
Only use the recommended bulb type and do not exceed the maximum wattage as it
could cause fire.
Do not plug the product in if cord is torn or frayed.
Cleaning & Maintenance
On polished finishes, often using talc powder reduces the appearance of
fingerprints and other smudges.
For respective shade surfaces, use the appropriate cleansers, i.e. glass
cleaner, acrylic polish, and wood polish.
Clean with soft cloth and a mild detergent.
DO not use abrasive cleaner.
Periodically (every 90 days) make sure that the screws are fully tightened.
Prolonged exposure to heat sources may cause glazing, melting and scorching,
or even cause color to fade.
Contents
Before getting,started,ensure the package contains the following components:
A
|
Fixture
|
x1
---|---|---
B
| |
x1
C
| |
x2
D
| |
x2
E
| |
x3
F
| |
x3
G
| |
x2
CRITICAL INSTRUCTION
WIRING DIAGRAM (ONLY FOR REFERENCE)
DO NOT ATTEMPT TO CUT FACTORY CONNECTIONS WITHOUT QUALIFIED KNOWLEDGE.
MODIFICATIONS MADE TO THIS PRODUCT WITHOUT THE CONSENT OF THE MANUFACTURER
WILL VOID WARRANTY.
E35106
NOTE: Notice the wiring diagram
and wire color when connecting wires between Wiz controller and LED source
WiZ
CONNECTED
SCHEMATIC FOR GENERAL REFERENCE ONLY
IMPORTANT
Make sure that your dimmable LED fixture is paired with the correct dimmer
type
Must be installed by a licensed electrician with knowledge of electronic
lighting systems
2022 MAXIM LIGHTING GROUP