ET2 Contemporary Lighting E32795-93BK Blossom LED 36 Inch Black Multi-Light Pendant Ceiling Light Instructions
- June 3, 2024
- ET2 Contemporary Lighting
Table of Contents
Contemporary Lighting E32795-93BK Blossom LED 36 Inch
Black Multi-Light Pendant Ceiling
Light Instructions
E32795-93BK Blossom LED 36 Inch Black Multi-Light Pendant Ceiling Light
PRODUCT NAME:E32795-93BK / E32795-93NAB
ITEM NUMBER:Blossom 5-Light Pendant
Please consult a qualified electrician for hanging fixture and wiring.
Light Source: 5 x G9 4W LED Bulb (Included)
Made in China
Before Getting Started
Read the instructions carefully prior to assembling the product.
When you open the package with a sharp tool like a cutter knife, be careful
not to damage the components inside.
Carefully remove all packaging materials and retain for future use.
Keep all hardware parts and packaging out of reach of small children.
Choose a clean, level, spacious assembly area.
Avoid hard surfaces that may damage the product.
Ensure that you have all required contents for complete assembly.
Take care when lifting. Assemble the product inclose proximity to where you
intend to position the item.
Do not over tighten the screws and bolts as this may damage the threads.
Do not let children play with this product.
Risk of suffocation!
Keep any packaging materials away from children.
Lamp Care Instructions
Carefully read through the instruction sheet before assembly and using the
product.
Caution there is a risk of shock. Disconnect from power source before
assembling or cleaning.
CAUTION: Xenon bulbs get very hot and may burn you. Always make sure
bulbs are off for a minimum of 10 minutes before handling. Fixture may be
dimmed using an electronic low voltage dimmer.
Only use the recommended bulb type and do not exceed the maximum wattage as it
could cause fire.
Do not plug the product in if cord is torn or frayed.
Cleaning & Maintenance
On polished finishes, often using talc powder reduces the appearance of
fingerprints and other smudges.
For respective shade surfaces, use the appropriate cleansers, i.e. glass
cleaner, acrylic polish, and wood polish.
Clean with soft cloth and a mild detergent.
DO not use abrasive cleaner.
Periodically (every 90 days) make sure that the screws are fully tightened.
Prolonged exposure to heat sources may cause glazing, melting and scorching,
or even cause color to fade.
Before getting,started,ensure the package contains the following
components: 
Combine stem lengths to meet your desired mounting height.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>