ET2 Lighting E21260-BK Penrose LED 7 inch Black ADA Wall Sconce Wall Light Instruction Manual
- June 3, 2024
- ET2 Lighting
Table of Contents
ET2 Lighting E21260-BK Penrose LED 7 inch Black ADA Wall Sconce Wall Light
Instruction Manual
Before Getting Started
- Read the instructions carefullyprior to assembling the product.
- When you open the package with a sharp tool like a cutter knife, be careful not to damage the components inside.
- Carefully remove all packaging material ands retain for future use.
- Keep all ha rdwa reparts and packaging out of reach of small children.
- Choose a clean, level, spacious assemblayrea. Avoid hard surfacesthat may damage the product.
- Ensurethat you have all requi redcontents for complete assembly.
- Take care when lifting. Assemblethe product in I close proximity to where you intend to position the item.
- Do not over tighten the screws and bolts as this may damage the threads.
- Do not let children play with this product.
Risk of suffocation! Keep any packaging materials away from children.
Low Voltage LED Lighting Instructions
Carefully read through the instruction sheet baessfore embly and using the
produ ct.
Caution there is a risk of shock. Disconnect from power source before ass em
blingor cleaning.
WARNNG: Wiresneed to be conn ectedto driver found incanop y and should
nto be connected directly to powersourceor ashortmay occur.
Do not cut factory connections unless instructed by the manufacturer
Do not plug the product in if cord is torn or frayed.
Cleaning & Maintenance
On polished finishes, often using talc powder reduces the appearance of
fingerprints and other smudges.
For respective shade surfaces, use the appropriate cleansers, i.e. glass
cleaner, acrylic polish, and wood polish.
Clean with soft cloth and a mild detergent. DO not use abrasive cleaner.
Periodi cal ly (eve ryaodays) make sure that the screws are fully tightened.
Prolonged exposureto heat sources may cause glazing, meltingand scorching, or
even cause color to fade.
Parts
Before getting,started,ensure the package contains the following components:
Assembly
Critical Instruction
WIRING DIAGRAM (ONLY FOR REFERENCE)
DO NOT ATTEMPT TO CUT FACTORY CONNECTIONS WITHOUT QUALIFIED KNOWLEDGE.
MODIFICATIONS MADE TO THIS PRODUCT WITHOUT THE CONSENT OF THE MANUFACTURER
WILL VOID WARRANTY.
