ET2 E24088-90NAB LED Pendant Instructions

ET2 E24088-90NAB LED Pendant

Product Information

Specifications

• Item / Model Number: E24088-90NAB Dispatch 17 LED Pendant
• LED Integrated 1 x 14W (Included)
• Made in China

Product Usage Instructions

Assembly Precautions

1. Read the instructions carefully before assembling the product.
2. Use a sharp tool like a box knife to open the package, but be cautious not to damage the components.
3. Remove all packaging materials carefully and keep them for future use.
4. Choose a clean, level, spacious assembly area to prevent damage to the product.
5. Ensure you have all the necessary contents for assembly.
6. Avoid over-tightening screws and bolts to prevent thread damage.

Installation Guidelines

1. Position the product close to where you intend to install it.
2. Avoid letting children play with the product.
3. Keep packaging materials away from children.
4. Disconnect from power source before assembling or cleaning.
5. Switch off, unplug, and allow the bulb to cool before replacing or cleaning it.

Safety Warnings

• Use only the specified bulb type and do not exceed the maximum wattage to avoid fire hazards.
• Check the product cord for any signs of damage like torn or frayed areas.
• Ensure wires are connected to a low voltage driver, not directly to a live wire to prevent short circuits.

Frequently Asked Questions

Q: Can children play with this product?

A: It is advised not to let children play with this product for safety reasons.

Q: What should I do if I notice damaged packaging materials?

A: Please keep packaging materials away from children and dispose of damaged materials properly.

Q: Can I replace the bulb with a higher wattage than specified?

A: No, it is recommended to use only the specified bulb type and wattage to prevent fire hazards.

Item / Model Number :E24088-90NAB
Dispatch 17″ LED Pendant

LED Integrated 1 x 14W (Included)

Please consult a qualified electrician prior to install

Made in China

LED LOW-VOLTAGE INSTRUCTIONS

• Read the instructions carefully prior to assembling
  the product.
  When you open the package with a sharp tool like a
  box knife, be careful not to damage the
  components inside.
  Carefully remove all packaging materials and retain
  for future use.
  Keep all hardware parts and packaging out of
  reach of children.
  Choose a clean, level, spacious assembly area. Avoid
  hard surfaces that may damage the product.
  Ensure that you have all required contents for
  complete assembly.
  Take care when lifting. Assemble the product in close
  proximity to where you intend to install it.
  Do not over tighten the screws and bolts as this
  may damage the threads.
  Do not let children play with this product.
  Risk of suffocation!
  Keep packaging materials away from children.

Lamp Care Instructions

Carefully read through the instruction sheet
before assembly and using the product.
ascintereois rier sure before assembling
or cleaning.
Switch off, unplug and allow bulb to cool before
replacing bulb or cleaning.
Only use the recommended bulb type and do not
exceed the maximum wattage as it could cause fire.
Check the product cord to be sure is free torn or
frayed.
/WARNING: Wires must to be connected to low
voltage driver and should not be connected
directly to live wire or a short may occur.

Lamp Care Instructions

Carefully read through the instruction sheet
before assembly and using the product.
ascintereois rier sure before assembling
or cleaning.
Switch off, unplug and allow bulb to cool before
replacing bulb or cleaning.
Only use the recommended bulb type and do not
exceed the maximum wattage as it could cause fire.
Check the product cord to be sure is free torn or
frayed.
/WARNING: Wires must to be connected to low
voltage driver and should not be connected
directly to live wire or a short may occur.

PARTS

Before getting,started,ensure the package contains the following components:

INSTALLATION

WIRING DIAGRAM

DIMMER COMPATIBILITY

MUST be installed by an experienced professional CRITICAL KNOWLEDGE of electronic lighting systems required

IMPROPER WIRING and/or INCORRECT DIMMER use can cause CATASTROPHIC DAMAGE!
THIS FIXTURE MUST BE INSTALLED with a COMPATIBLE DIMMER SWITCH
DO NOT CUT FACTORY-MADE CONNECTIONS.

VERIFIED LIST OF TESTED DIMMERS

• Lutron DVCL-153P
• Lutron SCL-153P
• Leviton IPLO6
• Leviton 6674
• Deako Simple Dimmer
• Due to inrush current, wattage should not exceeed 150W on a 600W dimmer

GENERAL COMPATIBILITY

TRIAC / FORWARD PHASE ELV / REVERSE PHASE Only Work at 120Vac 0-10V / LOW VOLTAGE

IMPORTANT!
If the control is not paired properly to LED fixtures, irreparable damage may occur.
If the dimmer you are using is not listed here, consult a lighting professional or view our
Dimming Compatibility Chart online: www.et2online.com

2023 ET2 CONTEMPORARY LIGHTING

References

• ET2 Lighting | Indoor & Outdoor Lighting

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>