ET2 E23224 Cubed 55 2 Light LED Outdoor Sconce Installation Guide

ET2 E23224 Cubed 55 2 Light LED Outdoor Sconce

Product Specifications

• Model: E23224 CUBED 5.5 2-LIGHT LED OUTDOOR SCONCE
• Power: LED/2:92/7$*
• Dimensions: 5.5 inches cubed
• Outdoor use: Yes
• Number of Lights : 2

Product Usage Instructions

Installation

1. Choose a suitable outdoor location for mounting the sconce.
2. Ensure the power source is turned off before installation.
3. Mount the sconce securely using the appropriate hardware and follow the wiring instructions provided.
4. Verify the sconce is properly installed and aligned before turning on the power.

Usage
To use the LED outdoor sconce:

1. Turn on the power source.
2. The sconce will be illuminated with LED lights.
3. To turn it off, simply switch off the power source.

Maintenance

To ensure optimal performance:

• Regularly clean the sconce to remove dust and debris.
• Check for any loose connections or damage and address them promptly.
• Replace any faulty LED lights following the manufacturer’s guidelines.

Before Getting Started

• Read the instructions carefully prior to assembling the product.
• When you open the package with a sharp tool like a box knife, be careful not to damage the components inside.
• Carefully remove all packaging materials and retain them for future use.
• Keep all hardware parts and packaging out of reach or small children.
• Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product.
• Ensure that you have all the required contents for complete assembly.
• Take care when lifting. Assemble the product near where you intend to install it.
• Do not over-tighten the screws and bolts as this may damage the threads.
• Do not let children play with this product.

Risk of suffocation!
Keep packaging materials away from children.

Lamp Care Instructions

Carefully read through the instruction sheet
before assembly and using the product.

Caution there is a risk of shock!
Disconnect from the power source before assembling or cleaning.

• Switch off, unplug, and allow the bulb to cool before replacing the bulb or cleaning.
• Only use the recommended bulb type and do not exceed the maximum wattage as it could cause fire.
• Check the product cord to be sure is free torn or frayed.

WARNING: Wires must be connected to a low-voltage driver and should not be connected directly to live wire or a short may occur.

Cleaning & Maintenance

• On polished finishes, often using talc powder can reduce the appearance of fingerprints and other smudges.
• For respective shade surfaces, use the appropriate cleansers, i.e. glass cleaner, stone polish, & wood polish.
• Clean with a soft cloth and a mild detergent. Do not use abrasive or harsh cleaners.
• Periodically (every 90-180 days) make sure that the screws are fully tightened.
• Prolonged exposure to heat sources may cause glazing, melting, and scorching, or even cause color to fade.

PARTS

Before getting, started, ensure the package contains the following components:

USING INSTRUCTION

• ADJUST THE ANGLE OF THE BEAM SPREAD BY POSITIONING THE FLAPS BEFORE INSTALLING THE SHADE COVER

WIRING DIAGRAM

DIMMER COMPATIBILITY

• MUST be installed by an experienced professional.
• CRITICAL KNOWLEDGE of electronic lighting systems is required.

ITEM/MODEL: E23224

IMPROPER WIRING and/or INCORRECT DIMMER use can cause CATASTROPHIC DAMAGE

• THIS FIXTURE MUST BE INSTALLED with a COMPATIBLE DIMMER SWITCH
• DO NOT CUT FACTORY-MADE CONNECTIONS.

VERIFIED LIST OF TESTED DIMMERS

• Lutron Diva DVCL-153P
• Lutron Diva DVELV-300P
• Lutron Skylark CTCL-153P
• DEAKO-Smart Dimmer
• DEAKO-Single Dimmer
• LEVITON 6672-L
• LEVITON 6674
• LEVITON DSL06

GENERAL COMPATIBILITY

• TRIAC / FORWARD PHASE
• ELV / R EVERSE PHASE
• ONLY at 120VAC
• Due to inrush current, wattage should not exceed 150W on a 600W dimmer

IMPORTANT

• If the control is not paired properly to LED fixtures, irreparable damage may occur.
• If the dimmer you are using is not listed here, consult a lighting professional or view our
• Dimming Compatibility Chart online: www.et2online.com

© 2023 ET2 CONTEMPORARY LIGHTING

FAQ

Q: Can I use dimmers with this outdoor sconce?

A: Yes, the following dimmers have been verified for use with this sconce: Lutron Diva DVCL-153P, Lutron Diva DVELV-300P, Lutron Skylark CTCL-153P, DEAKO-Smart Dimmer, DEAKO-Single Dimmer, LEVITON 6672-L, LEVITON 6674, LEVITON DSL06.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>