ET2 E4201 6-90 LED Mirror Instruction Manual

E4201 6-90 LED Mirror

Specifications:

• Product Name: LED Mirror
• Item Number: E42016-90
• Light Source: Integrated LED 25W

Product Usage Instructions

Before Getting Started:

1. Read the instructions carefully prior to assembling the product.
2. Handle package with care to avoid damaging components.
3. Remove all packaging materials and keep them for future use.
4. Choose a clean, level assembly area away from hard surfaces.
5. Ensure you have all necessary contents for assembly.
6. Avoid over-tightening screws and bolts during assembly.
7. Do not allow children to play with the product or packaging materials.

General Lighting Instructions:

• Read the instruction sheet before assembly and use.
• Disconnect from power source before assembly or cleaning to avoid shock.
• Switch off, unplug, and allow bulb to cool before replacing or cleaning.
• Use recommended bulb type and wattage to prevent fire hazards.
• Do not plug in if cord is torn or frayed.

Cleaning & Maintenance:

• Use talc powder on polished finishes to reduce fingerprints.
• Use appropriate cleansers for different surfaces (glass, acrylic, wood).
• Clean with soft cloth and mild detergent, avoiding abrasive cleaners.
• Periodically tighten screws every 90 days to ensure stability.

Installation Instructions:

• Turn off power at the main fuse or circuit breaker before installation.
• The mirror can be mounted over an electrical outlet box or on the wall and plugged into an outlet.
• Handle all parts carefully to avoid scratching the mirror surface during assembly.

FAQ:

• Q: Can the color temperature of the light be adjusted?
  A: Yes, the color temperature can be adjusted by tapping on the mirror face to cycle through different options (3000K, 4500K, 6400K).

• Q: Is the LED fixture compatible with wall dimmer switches?
  A: Yes, the LED fixture is compatible with wall dimmer switches for adjusting light output.

• Q: What is the recommended wattage for the bulb?
  A: The integrated LED has a wattage of 25W, and it is recommended not to exceed this wattage to prevent overheating or damage.

PRODUCT NAME : LED MIRROR
ITEM NUMBER : E42016-90

DIMENSION

Please consult your electrician for installing fixture and wiring.

Instructions

Dimming and Color Temperature Change Instructions:

This LED fixture is compatible with wall dimmer switches.
Light output can only be adjusted by using the wall dimmer switch

1. To change the color temperature of the light by touching touch symbol on mirror face.

Before Getting Started

• Read the instructions carefully before assembling the product.
• When you open the package with a sharp tool like a cutter knife, be careful not to damage the components inside.
• Carefully remove all packaging materials and retain for future use.
• Keep all hardware parts and packaging out of reach of small children.
• Choose a clean, level, spacious assembly area.
• Avoid hard surfaces that may damage the product.
• Ensure that you have all the required contents for complete assembly.
• Take care when lifting. Assemble the product near where you intend to position the item.
• Do not over-tighten the screws and bolts as this may damage the threads.
• Do not let children play with this product.

Risk of suffocation!
Keep any packaging materials away from children

GENERAL Lighting Instructions

• Carefully read through the instruction sheet before assembly and using the product.
• Caution there is a risk of shock. Disconnect from the power source before assembling or cleaning.
• Switch off, unplug and allow the bulb to cool before replacing the bulb or cleaning.
• Only use the recommended bulb type and do not exceed the maximum wattage as it could cause fire.
• Do not plug the product in if the cord is torn or frayed.

Cleaning & Maintenance

• On polished finishes, often using talc powder reduces the appearance of fingerprints and other smudges.
• For respective shade surfaces, use the appropriate cleansers, i.e. glass cleaner, acrylic polish, and wood polish.
• Clean with a soft cloth and a mild detergent.
• Do not use abrasive cleaner.
• Periodically (every 90 days) make sure that the screws are fully tightened.
• Prolonged exposure to heat sources may cause glazing, melting and scorching, or even cause colour to fade.

Contents

Before getting, started, ensure the package contains the following components:

IMPORTANT:

• Turn off the power at the main fuse or circuit breaker box before starting the installation
• This mirror can be mounted over an electrical outlet box or on the wall and plugged into an outlet
• Carefully remove all parts from the box, and place on a flat surface. Throughout the assembly, be careful to avoid scratching the surface of the mirror.

1. Place the wall template of the mirror on the wall in the location selected for the mirror. Make sure the wall template or mirror is level and in the correct position. Secure the wall template to the wall then mark the location of the 4 wall anchors(A) as indicated on the template from the wall.
2. Remove the wall template from the wall.
3. Create holes on wall marks and screws the (X4) wall anchors (A).
4. Secure (X4) nails (B) into (X4) wall anchors (A).
5. Hang (X4) wall hangers (C) on the back of the mirror onto (X4) nails (B). If wall is not mounted parallel to the floor, repeat step 4.
6. Plug the cord into the closest power outlet. OR before step 5, cut the plug and connect the wire with the junction box wire.
   IMPORTANT SAFETY INSTRUCTIONS This mirror has a 3 pins plug, once the plug is cut, the 3 core wire(phase/neutral/ground) will be exposed and then can connect with phase/neutral/ground which comes out from the junction box

Cleaning & Care:

Clean glass with household glass cleanser.

MADE IN CHINA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>