SUNRICHER 12W DALI DT8 LED Driver Instructions
- June 3, 2024
- SUNRICHER
Table of Contents
] SUNRICHER 12W DALI DT8 LED Driver
Important: Read All Instructions Prior to Installation
Function introduction
Dips to set the operation current
Product Data
Output
| LED Channel| 2
---|---|---
DC Voltage| 100mA| 150mA| 200mA| 250mA| 300mA| 350mA| 400mA| 450mA
6-52V| 6-52V| 6-52V| 6-48V| 6-40V| 6-34V| 6-30V| 6-26V
Current| 500mA| 550mA| 600mA| 650mA| 700mA|
6-24V| 6-21V| 6-20V| 6-18V| 6-17V
Current Accuracy| ±3%
Rated Power| Max. 12W
Input
| Voltage Range| 200-240V AC
Frequency Range| 50/60Hz
Power Factor (Typ.)| > 0.95 @ 230VAC Full load
Total Harmonic
Distortion
| THD ≤ 12% (@ full load / 230VAC)
Efficiency (Typ.)| >80% @ 230VAC full load
AC Current (Typ.)| 0.07A @ 230VAC
Inrush Current (Typ.)| COLD START max. 2A at 230VAC
Leakage Current| < 0.5mA /230VAC
Standby Power Consumption| <0.5W
Anti Surge| L-N:0.5KV
Control
| Dimming Interface| DALI Device Type 8 (DALI consumption < 2mA)
Dimming Range| 0.1%-100%
Protection
| Short Circuit| Yes, recovers automatically after fault condition is removed
---|---|---
Over Current| Yes, recovers automatically after fault condition is removed
Over Temperature| Yes, recovers automatically after temperature drop
Environment
| Working Temp.| -25℃ ~ +45℃
Max. Case Temp.| TC=85℃ (Ta=”45℃”)
Working Humidity| 10% ~ 95% RH non-condensing
Storage Temp. & Humidity| -40℃ ~ +80℃, 10% ~ 95% RH
Safety & EMC
| Safety Standards| EN61347-1, EN61347-2-13
Withstand Voltage| I/P-O/P: 3.75KVAC
Isolation Resistance| I/P-O/P: 100M Ohms / 500VDC / 25℃ / 70% RH
EMC Emission| En55015, EN61000-3-2, EN61000-3-3
EMC Immunity| En61547, EN61000-4-2,3,4,5,6,8,11
Others
|
MTBF
| 191350H, MIL-HDBK-217F @ 230VAC full load
and 25℃ ambient temperature
Dimension| 135x35x20mm (LWH)
Warranty| 5 Years
- In compliance with IEC 62386-101:2014, IEC 62386-102:2014, IEC 62386-207 Ed2.IEC 62386-209:2011
- Dimmable LED driver. Max. output power 12W
- PWM dimming, smooth and deep dimming
- IP20 rating, suitable for indoor LED lighting applications
- High power factor and efficiency
- Built-in DALI-2/Push interface, DALI DT8 device
- 5 years warranty
- To switch and dim Tunable White LED lighting fixtures
- Compatible with universal DALI masters that support DT8 commands
- Error report function
- 2 channel 100~700mA constant current output, select by DIP switch
- Class Ⅱ power supply, full isolated plastic case
Safety & Warnings
- DO NOT install with power applied to the device.
- DO NOT expose the device to moisture.
Operation
DALI Address
- DALI address for 2 channels output are assigned by DALI Master controller automatically, please refer to user manuals of compatible DALI Masters for specific operations.
Wiring Diagram
With DALI bus