CRYSTORAMA ADD-300-CH-SM_CEILING Addis Four Light Ceiling Mount Instruction Manual

CRYSTORAMA ADD-300-CH-SM_CEILING Addis Four Light Ceiling Mount

Product Information

• Product Name: ADD-300-CH-SM_CEILING
• Manufacturer: Crystorama.com
• Product Type: Pendant
• Number of Stems: 3 (12 inches) and 1 (6 inches)
• Number of Glass Sets: 24 pieces
• Glass Size: 2 3/4 inches (diameter) x 7 3/4 inches (height)
• Fixture Rating: Dry Rated

Product Usage Instructions

1. Decide the preferred hanging height and choose the correct number of rods needed.
2. Feed the wires through the rods, screw collar ring, and canopy (with a bigger center hole).
3. Screw the rods together.
4. Screw one end of the rod assembly onto the top of the frame and the other end onto the swivel on the mounting strap.
5. Attach the mounting strap onto the outlet box.
6. Raise the fixture up to the ceiling and do the wire connections.
7. Slip the canopy up along the rods and over the mounting strap. Secure with the screw collar ring.
8. Install the bulb into the socket.
9. Dress the glass as illustrated.

Product Usage Instructions for Ceiling:

1. Screw the canopy kit (with a smaller center hole) onto the frame.
2. Attach the mounting strap onto the outlet box.
3. Raise the fixture up to the ceiling and over the mounting strap. When the wire connection is made, secure the canopy with two ball nuts.
4. Install the bulb into the socket.
5. Dress the glass as illustrated.

Note : The glass sets included with the product are available in two options: Smoke glass and Clear glass.

WARNING:

• Electrical Danger Turn Power Off All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes.
• You will need 4-Candelabra Base Bulb 40 Watts Recommended 60 Watts Max. USE LED BULBS FOR EXTENDED USE This Fixture is Dry Rated

For Pendant

How to Install

1. Decide the preferred hanging height and choose the correct number of of rods needed.
2. Feed the wires through the rods, screw collar ring and canopy (with a bigger center hole). Screw the rods together. Screw one end of the rod assembly onto the top of frame and the other end onto the swivel on the mounting strap.
3. Attach the mounting strap onto the outlet box.
4. Raise the fixture up to the ceiling and do the wire connections. Slip the canopy up along the rods and over the mounting strap. Secure with the screw collar ring.
5. Install the bulb into the socket.
6. Dress the glass as illustrated.

Glass Sets

• 24 pcs Smoke glass 2 3/4×7 3/4″

WARNING : This product can expose you to lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov

For Ceiling

How to Install

1. Screw the canopy kit (with a smaller center hole) onto the frame.
2. Attach the mounting strap onto the outlet box.
3. Raise the fixture up to the ceiling and over the mounting strap. When the wire connection is made, secure the canopy with two ball nuts.
4. Install the bulb into the socket.
5. Dress the glass as illustrated.

Glass Sets

• 24 pcs Clear glass 2 3/4×7 3/4″

WARNING : This product can expose you to Lead, which is known to the State of California to cause cancer and or birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov

Part Numbers

• A. (1)-Canopy,D 5 1/8XH1″ XBN300CHCAN5.125IN
• B. (1)-Collar ring
• C. (1)-Swivel
• D. (1) – 6″ Rod – XBN300CHROD6IN
• E. (3) – 12″ Rods – XBN300CHROD12IN
• F. (1)-Frame
• G. (24)-Glass, D2 3/4×H7 3/4″ XBN300CHSMGLA7.75IN

MODEL ADD-300-CH-SM_CEILING
Crystorama.com

References

• Crystorama Lighting

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>