LOGIC Mobility L65B 6.5 Inches Smartphone User Guide

June 3, 2024
LOGIC Mobility

LOGIC Mobility L65B 6.5 Inches Smartphone

LOGIC-Mobility-L65B-6.5-Inches-Smartphone-product

Thank you for purchasing this innovative LOGIC device. The specifications in this document are subject to change without prior notice. LOGIC and the LOGIC logo are registered trademarks of Swagtek, Inc. Other trademarks are the property of their respective owners.

Charge for 24 hours before using

Install SIM card/memory card

Get to know your Logic phone

Connect your Logic phone to the computer using the USB cable

Copy music files from your computer to your Logic phone

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference.
  2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and Can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to rádio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interterence by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver,
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

SAR Information Statement

Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RE energy for the general population. Ihe guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies.

The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for Wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate or SAR. The SAR limit set by the FCC is 16 W/kg. Tests for SAR are conducted with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This Is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network.

In general, the closer you are to a wireless base station antenna, the lower the power output. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations (eg. at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model phone, when tested for use at the ear, is 0.396N/Kg and when worn on the body, as described in this user guide, is 0.472W/kg{Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements).

The maximum scaled SAR in hotspot mode is 0.498W/Kg. While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure The FCC has granted Equipment Authorization for this model of phone with all reported SAR levels evaluated as in compliance with the FCC exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID: O55653522 Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry Ass0-citation (CTIA) web- site at http://www.vwow-com.com.

In the United States and Canada, the SAR limit for mobile phones used by the public is 16 watts/kg (W/kg) Covering over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements.

Body-worn Operation

This device was tested for typical body-worn operations. To comply with REexposure requirements, a minimum separation distance of mm must be maintained between the user’s body and the handset, including the antenna. Third-party belt clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that did not meet these requirements may not comply with RE exposure requirements and should be avoided. Use only the supplied or approved antenna.

Warranty Certificate Terms and Conditions

LOGIC warrants that its Products will be free from defects in material and workmanship. The warranty period is one (1) year for the products and three (3) months for the accessories which are part of the original package including the battery. The warranty period begins on the date of purchase by the End-User who shall present an invoice or a purchase receipt when requiring warranty service otherWise the warranty period will begin from the date of manufacture of the product. LOGIC will repair a product without cost to the customer if it presents a manufacturing defect or defect in workmanship during the Warranty period and if the defect occurred under normal Conditions of use in accordance with the instructions and specifications stated in the user’s manual.

For additional information about the terms and conditions of information, LOGIC’s Limited warranty or to obtain warranty service VISIt please at the Support Section logicmobility.com.

Made in China
Copyright Swagtek, Inc. 2022.

logicmobility.com.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals