hama 00176602 WiFi LED Bulb Instruction Manual
- June 12, 2024
- Hama
Table of Contents
- hama 00176602 WiFi LED Bulb
- Product Information
- Product Usage Instructions
- Explanation of warning symbols and notes
- Package contents
- Safety instructions
- Here’s how easy it is
- Warranty Disclaimer
- Declaration of Conformity
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
hama 00176602 WiFi LED Bulb
Product Information
The WiFi LED-Bulb is a smart home device manufactured by Hama GmbH & Co KG. It is designed to be controlled via a mobile application and offers various features such as dimming andcolor-changing capabilities. The product is available in multiple variants with the following model numbers: 00176597, 00176598, 00176599, 00176600, 00176601, 00176602, and 00176603. The WiFi LED- Bulb operates on a frequency band of 2.4 GHz and has a maximum radio-frequency power transmitted of less than 100 mW. It is important to note that the lamp is not suitable for use with conventional dimmers and should only be used in dry conditions.
Product Usage Instructions
- Download and install the mobile application for controlling the WiFi LED-Bulb. The link to the app can be found at https://link.hama.com/app/smart-home.
- Ensure that the bulb is properly installed in a compatible light fixture.
- Connect your mobile device to the same WiFi network that the bulb will be connected to.
- Launch the mobile application and follow the on-screen instructions to set up the WiFi LED-Bulb.
- Once the setup is complete, you can use the app to control various functions of the bulb, including turning it on/off, adjusting brightness, and changing colors (if supported).
- Make sure to observe the safety instructions and warnings mentioned in the user manual to prevent electric shock or any other hazards.
- If you encounter any issues or have questions about the product, refer to the warranty disclaimer provided by Hama GmbH & Co KG. They can be contacted for further assistance.
- For recycling the product, follow the recycling information provided in the user manual to ensure proper disposal.
- Keep in mind that the WiFi LED-Bulb should be used in compliance with RF exposure guidelines. Maintain a distance of at least 20 cm between the bulb and your body when using it.
Important information – Quick reference guide:
- This quick-reference guide contains the most important basic information, such as safety instructions and the steps necessary to operate the product.
- The full text of the manual is available at thefollowing internet address: www.hama.com -> 00176597, 00176598, 00176599, 00176600, 00176601, 00176602, 00176603 -> Downloads
- Save the manual on your computer for reference and print them out if possible.
Explanation of warning symbols and notes
- Risk of electric shock This symbol indicates a risk of electric shock from touching product parts carrying hazardous voltage.
- Warning This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.
- Note This symbol is used to indicate additional information or important notes.
Explanation of symbols used on the product label
Package contents
- 1 x incandescent bulb
- 1 x quick-start guide
Safety instructions
- The product is intended for private, non-commercial use only.
- Protect the product from dirt, moisture and overheating and use it in dry environments only.
- Use the product only for the intended purpose.
- Do not use the product in the immediate vicinity of heaters, other heat sources or in direct sunlight.
- Do not drop the product and do not expose it to any major shocks.
- Only use the article under moderate climatic conditions.
- Do not operate the product outside the power limits specified in the technical data.
- Do not modify the product in any way. Doing so voids the warranty.
- Children must not play with the device. Children may not clean the product or perform user maintenance without supervision.
- Dispose of packaging material immediately in accordance with the locally applicable regulations.
- Do not use the product in areas in which electronic products are not permitted.
- Do not use the product in a damp environment and avoid splashing water.
- Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
- The product must only be operated on a supply network as described on the type plate.
- Do not open the device or continue to operate it if it becomes damaged.
- If the product is to be operated outdoors, it may be operated only in protected outdoor areas.
- Use this product only with lights and fittings that are approved for the application and appropriate for the product. Please check that the product is in perfect working order before making use of it.
- Using damaged or inappropriate lights or fittings carries the risk of electric shocks.
- Whenever changing a light, always ensure that the light or fitting in question is voltage-free. Switch it off and/or pull the mains plug.
- Not suitable for operation with dimmers, electrical switches, photocells, time switches or twilight switches.
- As with all electrical products, this device should be kept out of the reach of children.
- Switch the light off via the light switch if it is not going to be used for a prolonged period of time (e.g. holiday). Please be aware that the presence simulation function cannot then be activated.
Warning
- Please note that lights (even LEDs) can generate heat and may become hot. Always let the light cool off for a few minutes before touching it or changing it.
- The device can only be operated on a 230 V / 50 Hz AC voltage network. Work on the 230 V network must only be carried out by an electrician certified in your country. The applicable accident prevention regulations must be adhered to.
- To avoid an electric shock from the device, please disconnect the mains voltage (switch off the automatic circuit breaker). Failure to comply with the installation instructions can cause fires or other hazards.
Risk of electric shock
- Do not open the product and do not operate it if it is damaged, if smoke, a strange smell or loud noises are coming from it. Immediately contact your dealer or our service department (see item “Service and Support”).
Here’s how easy it is
- Download the Hama Smart Solution APP from the Apple App Store or Google Play Store
- Open the Hama Smart Solution APP
- The first time you use the app, you need to register and create a new account. If you already have an account, log in with your access details
- Screw the LED light into the appropriate fitting
- The LED light starts to flash quickly (if it does not, switch the LED light ON and OFF again quickly 3 times at your switch)
- Now click the + at the top right-hand corner and select Lighting.
- Confirm that the light is flashing quickly.
- Now enter the name of your WiFi network and the password and confirm.
- The light is now connected. Once the connection is successful, the light will stop flashing
- You can now set up, control and configure the WiFi Smart LED light with the APP
Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.
Recycling Information
Note on environmental protection:
After the implementation of the European Directives 2012/19/EU and 2006/66/EU
in the national legal system, the following applies: electrical and electronic
devices, as well as batteries, must not be disposed of with household waste.
Consumers are obliged by law to return electrical and electronic devices as
well as batteries to the designated public collection points or to the point
of sale at the end of their service lives. Detailed information on this topic
is defined in the national laws of the respective country. This presence of
the above symbol on the product, operating instructions or package indicates
that the product is subject to these regulations. By recycling, reusing the
materials or other forms of utilizing old devices/batteries, you are making an
important contribution to protecting our environment.
RF exposure information
This device complies with the EU requirements for limiting the exposure of
the general public to electromagnetic fields by means of health protection.
The device complies with RF specifications provided it is used 20 cm away from
the body.
Declaration of Conformity
Hama GmbH & Co KG hereby declares that the radio equipment type [00176597, 00176598, 00176599, 00176600, 00176601, 00176602, 00176603] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.hama.com -> 00176597, 00176598, 00176599, 00176600, 00176601, 00176602, 00176603 -> Downloads.
- Frequency band(s) 2.4 GHz
- Maximum radio-frequency power transmitted < 100 mW
Link to App:https://link.hama.com/app/smart-home
Hama GmbH & Co KG
86652 Monheim/Germany
Service & Support
www.hama.com
+49 9091 502-0
“Google and Google Play are trademarks of Google LLC.”
All listed brands are trademarks of the corresponding companies. Errors and
omissions excepted, and subject to technical changes. Our general terms of
delivery and payment are applied.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>