EXTOL 8856631 Semi Dipped Polyester Gloves In PU, White, Size 9 Inches User Manual
- June 3, 2024
- EXTOL
Table of Contents
EXTOL 8856631 Semi Dipped Polyester Gloves In PU, White, Size 9 Inches
Translation of original
Manufacturer: Madal Bal a.s.
Bartošova 40/3, CZ-760 01 Zlín, Czech Republic
www.extol.eu
Application
- The gloves are not intended for protection against minimal risks (category 1), which pursuant to Directive (EU) 2016/425 are exclusively the following: a) superficial mechanical injury; b) contact with cleaning materials of weak action or prolonged contact with water (i.e. only on water-repellent glove models); c) contact with hot surfaces not exceeding 50 °C; d) atmospheric conditions that are not of an extreme nature; Extol® brand glove specifications: 8856602 to -05: synt. leather-palms, spandex-back, size 10“-13“; 8856650 to -53: synt. leather-palms, lurex-back, size 8“- 11“; 8856655 to -58: pig skin-palms, spandex-back, size 8“-11“; 8856620 to -22: nylon half-dipped in nitrile, size 8“, 10“; 8856630 to -33 (white)/ -35 to -38 (black): polyester (PES) half-dipped in polyurethane (PU), size 8“-11“; 8856670 to -71: nylon half-dipped in nitrile, size 8“, 9“; 99708: cotton +PVC dots, size 10“; 8856675 to -77: synt. leather-palms, lurex-back, size 8“- 10“; 99713 to -15; 99719: polyester (PES)+PVC dots, size 8“-10“; 8856669: nylon half-dipped in nitrile, size 7“; 8856661 and -62: latex, size 7-8“ and 9-10“; 9964, 9965: Leather gloves, size: 10“-10,5“; 99708: cotton with PVC dots, size: 10“; 8856641 and -42: cotton, half-dipped in latex, size: 9“ and 10“.
- Instructions for use and maintenance of the gloves: The gloves must not be used if there is a risk of the gloves becoming caught in moving machine parts and for protection against more serious risks than specified in section „Purpose of use“.
- Always wear the correct glove size and check their condition before use.
- Before using the gloves, inspect them for compromised integrity (holes), and undamaged seams, whether they have become hard or excessively worn out or otherwise damaged.
- Do not use damaged gloves.
- Protect the gloves against heat, organic solvents and their fumes, mineral oils and grease.
- In the event of an allergic reaction after the gloves come into contact with the skin of the user, do not use the gloves, e.g. the latex on latex gloves is considered to be a potential allergen.
- The gloves are not intended to be washed.
- A natural feature of leather and lurex is that after drying their softness and flexibility (gripping ability) worsen.
- In the case of gloves made from leather and lurex, remove mechanical particles using a brush; half-dipped gloves or textile gloves can be rinsed by hand in clean cold water (not in the washing machine) and dried at room temperature.
- Prevent the gloves from coming into contact with aggressive cleaning products, e.g. bleaches. A short-term lifetime of the gloves is generally assumed because gloves are consumable goods that are subject to wear depending on the frequency and manner of use.
- When the gloves are wet, dry them at room temperature. Prevent the effects of heat or microwave radiation for drying purposes.
- When using gloves, adhere to the fundamentals of generally applicable hygiene rules, where it is assumed that every user should have their own pair of gloves.
- Gloves used by a user with skin injuries, mycosis, eczema, etc. should not be used by another user.
- Store dry gloves at room temperature in a dry location away from direct sunlight and radiant heat in well-ventilated dry location.
- In the event that the gloves are contaminated by dangerous substances or infectious material, place them into an undamaged plastic bag and take them to the respective collection points for dangerous and infectious materials.
- CE: meets respective requirements of Directive (EU) 2016/425 EU;
- CAT I: only for minimal risks pursuant to (EU) 2016/425; EU
- decla-ration of conformity:
- This declaration is issued under the exclusive responsibility of the manufacturer: Madal Bal a.s., Bartošova 40/3, CZ-760 01 Zlín, Corp. ID No.: 49433717.
- The manufacturer declares that the above-described Extol® brand glove product lines, as the subject of the EU declaration of conformity, conform to the Directive (EU) 2016/425, specifying the requirements for personal protective aids (PPA). Conformity of the above-mentioned Class I PPA (for minimum risk) with the basic requirements of the health and safety directives have been met by means of internal production control (module A) according to to annex IV of Directive (EU) 2016/425 in accordance with annex ZA of the harmonized norm EN 420:2003+A1:2009, on the basis of which the conformity is dec-lared, and this for the duration of the harmonization of this norm; after cancellation of its harmonization it shall conform according to to annex ZA of norm EN ISO 21420:2020.
The EU declaration of conformity forms a part of the user‘s manual that is available for download at the website address presented at the beginning of the user‘s manual after entering the glove model number.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>