Esfos EFS-W-017 3-Light Black Wall Sconces for Bathroom User Guide
- June 15, 2024
- Esfos
Table of Contents
Esfos EFS-W-017 3-Light Black Wall Sconces for Bathroom
Product Information
Specifications
- Model: EFS-W-017
- Brand: Esfos
- Type: Wall Sconce
Product Usage Instructions
Installation Steps
Before starting the installation process, please read and follow all the
instructions and warnings provided in this manual.
Step 1: Attach the Mounting Units to the Base of the Fixture Back Plate
Refer to the picture below for the order of attachment (A to F). Make sure all
the mounting units are properly secured to the base of the fixture back plate.
Step 2: Attach the Mounting Plate to the Wall
Attach the screw to the mounting plate and drill the plate to the wall (J to
I). Ensure that the handle is attached vertically. Take the wire out of the
middle of the plate. If you don’t have a pre-installed base in your home, you
can use pointed screws and expansion for mounting directly to the wall.
Step 3: Install the Insulating Cover
Place the insulating cover over the connected wires to ensure safety.
Step 4: Mount the Fixture Back Plate on the Mounting Plate
Using screws, mount the fixture back plate on the mounting plate.
Step 5: Fix the Fixture Back Plate to the Ceiling or Wall
Ensure that the power in your home is turned off before proceeding. Fix the fixture back plate to the ceiling or wall. Install the lampshade and bulb in sequence. Pay attention to the installation position to ensure that the wall sconce can be fixed at the ideal angle later.
Once everything is properly installed, turn on the light and enjoy the warm lighting.
FAQ (Frequently Asked Questions)
What should I do if some parts are missing?
If you find any missing parts, please refer to the illustrations in the
installation instructions to confirm. If necessary, contact our customer
service by email at service@espird.com for
assistance.
How should I handle the glass shade?
The glass shade is fragile, so please take care of your hands when handling
glass components or lamps. Avoid applying excessive force or dropping the
glass shade to prevent breakage.
What if I need help with electrical wiring connections?
If you are unfamiliar with proper electrical wiring connections, it is
recommended to seek assistance from a qualified electrician to ensure
compliance with local and National Electrical Code (N.E.C.) standards.
What if I received a damaged item or have difficulty installing it?
If the item arrived damaged or if you encounter difficulties during
installation, please contact us by email at
service@espird.com. We are always ready to assist
you and provide after-sales service.
How can I return or exchange the product?
If you are not satisfied with our products and wish to return or exchange
them, please contact us by email or through the Amazon platform. You can reach
our after-sales service center at
service@espird.com. Alternatively, on the Amazon
website, click on “sold by Esfos” and then click on “Ask a question” to inform
us about the issue with the product. We will provide you with a solution.
Where can I find additional installation assistance?
If you have any questions about the installation process, you can also scan
the provided QR code. This will redirect you to our YouTube channel, where you
can watch our sample installing video for further guidance.
PLEASE READ THESE INSTRUCTIONS CAREFULLY. FOLLOW ALL INSTALLATION INSTRUCTIONS AND OBSERVE ALL WARNINGS
WARNING
- Turn the electricity off at the main circuit breaker panel before installation. Thoroughly wash hands after finishing.
- Remove the fixture and the mounting package from the box and make sure that no parts are missing by referencing the illustrations on the installation instructions.
- All electrical connections must be following local and National ElectricalCode (N.E.C.) standards. If you are unfamiliar with proper electrical wiring connections, please ask for help from a qualified electrician.
CAUTION
The glass shade is fragile, please take care of your hands when handling glass
components or lamps.
PART LIST AND ASSEMBLY ILLUSTRATION
Note: Some parts may be pre-installed or pre-assembled
INSTALLATION STEPS
STEP 1
Attach the mounting units to the base of the fixture back plate, in the order
shown in the picture below.(A to F)
STEP 2
Attach the screw to the mounting plate and drill the plate to the wall] to l),
and take sure that handle attach in vertical. Take the wire out of the middle
of the plate.
Also, we have pointed screws as well as expansions for when you don’t have a pre-installed base in your home. Mounting plate can be mounted directly to the wall using pointed screws and expansion.
STEP 3
Install the insulating cover over the connected wires.
STEP 4
Mount the fixture back plate on the mounting plate with screws.
STEP 5
Make sure that power in your home is off. Fix the fixture back plate to the
ceiling or wall, and install the lampshade and bulb in sequence. Pay attention
to the installation position to ensure that the wall sconce can be fixed at
the ideal angle later.
Turn on the light and enjoy the warm lighting
ENDNOTE
If you have any question about installation, you can also scan the QR code, wait a moment,you will be redirected to YOUTUBE that you can watch our sample installing video.
If you are not satisfied with our products, intending to
“return”or”exchange”the product.
Please be free to contact us by email or Amazon.
After-sales service center:service@espird.com
Amazon Way:click on “sold by Esfos”and then clicking on”Ask a
question”,telling us what’s wrong about the products.
Don’t be worry, we are always have the solution.
Esfos Wall Sconce
AFTER-SALES SERVICE
Eustomers strays insists on the principle of quality first and If the item
arrived damaged,missing parts too difficult to install or just you don’t like
it,please contact us freely by
email(service@espird.com). We are always ready to
service you and help you.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>