EXTOL PREMIUM 8849040 Portable Work Platform User Manual

: October 27, 2023
: EXTOL PREMIUM

Table of Contents

Introduction
WARRANTY PERIOD
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

EXTOL PREMIUM 8849040 Portable Work Platform

Introduction

Dear customer,
Thank you for the confidence you have shown in the Extol® brand by purchasing this product.
This product has been tested for reliability, safety and quality according to the prescribed norms and regulations of the European Union.
Contact our customer and consulting centre for any questions at:
www.extol.eu service@madalbal.cz
Manufacturer: Madal Bal a. s., Průmyslová zóna Příluky 244, 76001 Zlín, Czech Republic
Date of issue: 26. 9. 2019

| Dimensions of folded up platform
---|---
| Dimensions of folded down platform
| Aluminium construction
| Steel hinges
| Safety warnings
| Read the user’s manual before use
| Maximum load capacity. Do not exceed the max. load capacity of the platform.
| Ensure that the platform stands on both support feet.
| Ensure that both support feet are properly secured using the latches.
| Never use the platform on a soft or uneven surface or on a slope. The surface must be rigid and level.
| Always stand on the platform with both feet. Do not step outside the platform on to other surfaces – the platform could be unstable.
| Do not reach out to long distances outside of the platform – the platform could be unstable.
| Do not place the platform in front of a door. Risk of falling when the door is opened.
| The product conducts electrical current. Never use this product in areas where there is a risk of the platform coming into contact with electricity. This could cause an injury to the user by electrical shock.
| Do not place the platform on slippery surfaces (greasy, wet, etc.).

. WARNING

Prior to using this product, please read and thoroughly study all the provided instructions and warnings including the warnings provided on the product itself in the form of warning labels and the related explanatory information provided in this user‘s manual.

PREPARING THE PRODUCT FOR USE

When folding up or folding down the product, ensure not clamp your fingers.
Fold open both support feet gradually to the sides to the max. possible position and secure each support foot using the latch according to the instructions on the label located underneath the locking mechanism on the platform. Each of the support feet has its own locking mechanism located on the diagonal of the platform.
Always place the platform on a stable, rigid and level surface, which is not slippery (always remove any grease or water prior to putting the platform down). Never place the platform on a inclining surface – risk of falling.
Prior to using the product, check that it is properly assembled and that both the support feet are properly secured in position by the latches located on the diagonal of the platform.
Inspect this product prior to using it. If the product is damaged or if any of its parts are deformed or missing, then do not use the product and arrange for its replacement with a faultless piece.
Remove grease, water and any other liquids as well as mechanical particles from the surface of the platform that could result in the user falling off.

WARNING

Do not place the platform on anything or attach anything to it for the purpose of increasing its height or levelling an uneven surface.

USING THE PLATFORM

WARNING DANGER!
The product conducts electrical current. Never use this product in areas where there is a risk of the platform coming into contact with electricity. This could cause an injury to the user by electrical shock.

WARNING

Be very careful when using the platform together with mechanical equipment or in its vicinity. This could result in injury.

WARNING

Do not exceed the maximum load capacity of the platform, which is 150 kg

When stepping on or off the platform, always face the platform.
Never step off the platform from the side unless it is secured against lateral movement or tilting over.

MAINTENANCE

Always maintain the platform and its feet in clean condition and prevent it from being soiled with coats of paint. Dried on paint may render the product non- -functional. Ensure that tools and material do not accumulate on the platform.
Prevent the pivot joints from becoming soiled.
Do not expose the product to the effects of corrosive substances such as acids, lyes, etc. These substances compromise the strength and load bearing capacity of the product.
Protect the product against impacts and falls.
When transporting the product, secure it against movement to prevent its damage.
Regularly lubricated the locking mechanism on the support feet.

WARRANTY PERIOD

(RIGHTS RELATING TO FAULTY PERFORMANCE)

The product is covered by a 2-year guarantee from the date of sale according to law. If requested by the buyer, the seller is obliged to provide the buyer with the warranty conditions (rights relating to faulty performance) in written form according to law.