hama 00201661 LED10 Power Pack Instruction Manual

hama 00201661 LED10 Power Pack

Product Information
The LED10S Power Pack is a portable power bank with a capacity of 10000 mAh. It is designed to charge various devices on the go.

Product Usage Instructions

1. Before using the power pack, make sure it is fully charged.
2. Connect the power pack to a power source using the Micro-USB input or USB-C input.
3. To charge a device, connect it to one of the USB-A outputs on the power pack. The power pack has two USB-A outputs.
4. The power pack provides an optimal current strength to reduce charging time. Make sure to use the appropriate USB cable for your device.
5. When cleaning the power pack, use a slightly damp, lint-free cloth. Do not use aggressive cleaning agents.
6. Please note that Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product, or failure to observe the operating instructions and safety notes.

Technical Data

• Micro-USB input: 5V 2A
• USB-C input: 5V 2A
• USB-A output 1: 5V 2.1A
• USB-A output 2: 5V 2.1A
• Total output: 2.1A (max.)
• Battery type: 3.7V / Li-Po
• Min. capacity: 10000 mAh / 37 Wh
• Typ. capacity: 10250 mAh / 37.92 Wh
• Usable capacity: 5900 mAh @ 5V 2.1A

Operating instruction

Controls and displays

1. On/Off switch
2. 2x USB-A connection
3. Micro-USB connection
4. LED capacity indicator
5. USB-C connection
6. Micro-USB charging cable

Thank you for choosing a Hama product.
Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference. If you sell the device, please pass this operating instruction on to the new owner.

Explanation of warning symbols and notes
Warning
This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.

Note
This symbol is used to indicate additional information or important notes.

Package contents

• Power pack with LED capacity indicator, 10000 mAh
• Micro-USB charging cable
• These operating instructions

Safety instructions

• Use the product only for the intended purpose.
• Protect the product from dirt, moisture, and overheating, and use it in dry environments only.
• Do not use the product in the immediate vicinity of heaters, other heat sources, or in direct sunlight.
• As with all electrical products, this device should be kept out of the reach of children.
• Do not drop the product and do not expose it to any major shocks.
• Do not operate the product outside the power limits specified in the technical data.
• Do not open the device or continue to operate it if it becomes damaged.
• Dispose of packaging material immediately in accordance with the locally applicable regulations.
• The battery is permanently installed and cannot be removed; dispose of the product as a whole in accordance with the statutory regulations.
• Do not modify the product in any way. Doing so voids the warranty.
• Do not use the product in areas in which electronic products are not permitted.
• Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
• Do not incinerate the battery or the product.
• Do not tamper with or damage/heat/disassemble the batteries/rechargeable batteries

Operation

Charging the power pack

• Start the power pack charging process by connecting the enclosed Micro-USB charging cable to the Micro-USB input on the power pack (IN 5V/2A) and to a suitable USB charger. Alternatively, you can also charge the power pack via the USB-C input (IN 5V/2A). To do this, consult the operating instructions for the USB charger you are using.
• The charging process begins and ends automatically.
•  Fully charge the power pack once before using it for the first time.

Note – capacity

• During the power pack charging process, the capacity is displayed constantly.
• The LED capacity indicator shows the current charge level in percent. The capacity indicator flashes during the charging process.
• When the capacity indicator shows a constant 100%, the power pack is fully charged.
• Press the button on the power pack to switch this on and to determine the power pack’s current capacity.
• To switch the power pack off, press and hold the button until the LED indicator goes out.

Warning – rechargeable battery

• Only use suitable charging devices or USB ports to charge the product.
• Do not use defective chargers or USB ports and do not attempt to repair them.
• Do not overcharge the product or allow the battery to completely discharge.
• Do not store, charge or use the device in extreme temperatures.
• Charge regularly (at least quarterly) during periods of prolonged storage.

Charging devices

• Connect the enclosed Micro-USB charging cable to the USB port on the power pack (see 7.
• Technical Data) and to the Micro-USB port on your device (mobile phone, Smartphone, etc.).
• In certain circumstances, the enclosed charging/connecting cable may not match the USB port on your device. In this case, use the USB cable that came with your device.
• The charging process begins automatically. During the charging process, the LED capacity indicator indicates the power pack’s remaining available capacity.
• The current battery charge status of your device is indicated on this.
• Terminate the charging process and switch the power pack off by pressing the button on the power pack twice in quick succession. The LED indicator goes out.
• In the event that no device is connected, the power pack switches itself off automatically.

Warning – Connection of devices

• Before connecting a device, check whether it can be adequately supplied with the power pack’s current delivery.
• Ensure that the total current consumption of the connected device is not exceeded (see 7. Technical Data).
• Note the instructions in your device’s operating manual.
• You must obey the instructions and safety notes contained therein regarding the supply of power to your devices.
• The power pack must not be charged and discharged at the same time!

Note – optimized charging

• Optimized charging means that the power pack recognizes the connected device, supplies it with the ideal current strength, and therefore reduces the charging time to a minimum.

Warning

• Never connect the power pack’s charging cable to its input and output simultaneously. This can damage the battery.
• Do not connect any devices during the power pack charging process. Doing so can damage the power pack and connected devices.

Care and maintenance
Only clean this product with a slightly damp, lint-free cloth, and do not use aggressive cleaning agents.

Warranty Disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product, or failure to observe the operating instructions and/or safety notes.

Technical data

• Micro-USB input 5 V 2A
• USB-C input 5 V 2A
• USB-A output 1 5 V 2.1A
• USB-A output 2 5 V 2.1A
• Total output 2.1A (max.)
• Battery type 3.7 V / Li-Po
• Min. capacity 10000mAh / 37Wh
• Typ. capacity 10250mAh / 37.92Wh
• Usable capacity* 5900mAh @ 5 V 2.1A

The usable capacity is the capacity that can be drawn from the output sockets, measured at 5 V output voltage and a draw current of 2.1 A. All listed brands are trademarks of the corresponding companies. Errors and omissions excepted, and subject to technical changes. Our general terms of delivery and payment are applied.

References

• hama.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>