muze MUZ4011 Bluetooth Headphones User Manual
- June 6, 2024
- muze
Table of Contents
- muze MUZ4011 Bluetooth Headphones
- Specifications
- Quick Look
- Charging
- Bluetooth Pairing
- Using Your Headphones
- Vivitar One Year Warranty
- To Obtain Warranty Service and Troubleshooting Information:
- Important Safety Precautions
- FCC Statement
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
muze MUZ4011 Bluetooth Headphones
Specifications
- Bluetooth Range: Up to 33 feet (10 meters)
- Battery Type: Polymer Lithium-Ion Battery
- Charging Input: DC 5V
- Play Time: Approximately 5-6 hours*
*Applicable at 50% of maximum volume. Results will be lower when the volume is higher
The Bluetooth® word mark and logos are registered trademarks owned by the
Bluetooth SIG, Inc. and any use of such marks by Sakar International is under
license. Other trademarks and trade names are those of their respective
owners.
Quick Look
Charging
- The included USB charging cable has a Micro USB plug and a standard USB plug.
- Insert the USB charging cable’s Micro USB plug into the charging port on your headphones.
- Insert the USB charging cable’s standard USB plug into the USB port of a computer or suitable USB charging adapter.
- The LED indicator light turns red while the headphones are charging then turns off once charging is complete
Bluetooth Pairing
- Press and hold the power button to power on your headphones.
- The LED indicator light will blink blue to indicate that your headphones are in pairing mode.
- Go to the Bluetooth settings menu on your phone. Make sure that Bluetooth is turned on. Connect to “MUZ4011.”
- The LED Indicator Light will blink blue slowly to indicate that your headphone is paired with your phone.Note that the light may blink slowly anytime music is playing.
Using Your Headphones
- Press and hold the power button to power on or power off your headphones.
- Press the Play/Pause Button to play a track. Press it again to pause a track.
- Press the button to return to the last track in a playlist. Press the button to advance to the next track in a playlist.
- Press and hold the Button to increase the volume. Press and hold the Button to decrease the volume.
Vivitar One Year Warranty
This warranty covers the original consumer purchaser only and is not
transferable.
This warranty covers products that fail to function properly UNDER NORMAL
USAGE, due to defects in material or workmanship. Your product will be
repaired or replaced at no charge for parts or labor for a period of one year.
What Is Not Covered by Warranty
Damages or malfunctions not resulting from defects in material or workmanship
and damages or malfunctions from other than normal use, including but limited
to, repair by unauthorized parties, tampering, modification or accident.
To Obtain Warranty Service and Troubleshooting Information:
Call 1-800-592-9541 in the U.S. or
visit our website at www.vivitar.com.
To receive a Warranty service along with the name and address of an authorized
product service center, the original consumer purchaser must contact us for
problem determination and service procedures. Proof of purchase in the form of
a bill of sale or receipted invoice, evidencing that the product is within the
applicable warranty period(s), MUST be presented in order to obtain the
requested service. It is your responsibility to properly package and send any
defective products along with a dated copy of proof of purchase, a written
explanation of the problem, and a valid return address to the authorized
service center at your expense. Do not include any other items or accessories
with the defective product. Any products received by the
authorized service center that are not covered by warranty will be returned
unrepaired.
NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY
IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE,
OTHER THAN THOSE EXPRESSLY DESCRIBED ABOVE SHALL APPLY. THE DISTRIBUTOR
FURTHER DISCLAIMS ALL WARRANTIES AFTER THE EXPRESS WARRANTY PERIOD STATED
ABOVE. NO OTHER EXPRESS WARRANTY OR GUARANTEE GIVEN BY ANY PERSON, FIRM OR
ENTITY WITH RESPECT TO THE PRODUCT SHALL BE BINDING ON THE DISTRIBUTOR.
REPAIR, REPLACEMENT, OR REFUND OF THE ORIGINAL PURCHASE PRICE – AT THE
DISTRIBUTOR’S SOLE DISCRETION -ARE THE EXCLUSIVE REMEDIES OF THE CONSUMER. IN
NO EVENT WILL THE DISTRIBUTOR, ITS MANUFACTURERS, OR SAKAR INT. BE LIABLE FOR
ANY INCIDENTAL, DIRECT, INDIRECT, SPECIAL, PUNITIVE, OR CONSEQUENTIAL DAMAGES
(SUCH AS, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS,
BUSINESS, SAVINGS, DATA OR RECORDS) CAUSED BY THE USE, MISUSE OR INABILITY TO
USE THE PRODUCT. EXCEPT AS STATED HEREIN, NO OTHER WARRANTIES SHALL APPLY.
NOTWITHSTANDING THE FOREGOING, THE CONSUMER’S RECOVERY AGAINST THE DISTRIBUTOR
SHALL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT SOLD BY THE DISTRIBUTOR.
THIS WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL CONSUMER WHO
PURCHASED THE
PRODUCT AND IS NOT TRANSFERABLE.
Some countries, states or provinces do not allow the exclusion or limitation of incidental or consequential damages or allow limitations on warranties, so limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may have other rights that vary from state to state or province to province. Contact your authorized retailer to determine if another warranty applies. This product is manufactured, distributed and sold by SAKAR International, Inc. All other trademarks are the property of the respective owner, who has not sponsored, endorsed or approved this product.
Important Safety Precautions
- READ ALL INSTRUCTIONS BEFORE USING YOUR HEADPHONES.
- Do not use your headphones near water. Clean using a dry or slightly moist cloth.
- Do not place your headphones on any wet surfaces.
- Do not allow children or the infirm to play with your headphones without adult supervision.
- Do not expose your headphones to excessive heat, flames or fire.
- Always press all buttons carefully. Do not manhandle your headphones.
- Do not use in extremely dry environments, as this can lead to static discharge during usage.
- Do not expose your headphones to temperatures above 40°C. Keep out of direct sunlight.
- Do not attempt to repair this product yourself. Contact a qualified service center if your headphones are in need of service.
- Do not drop, puncture or expose your headphones to excessive trauma.
- Your headphones are not intended for commercial use.
- Do not place near objects that generate a strong magnetic field.
- Use only the supplied charging cables. Unplug this device when not in use for long periods of time or during lightning storms.
- Use a soft cloth to clean your headphones. Never use any harsh chemicals or detergents. Make sure your headphones are dry before charging.
- Please recycle or dispose of your headphones properly based on the laws and rules of your municipality. Contact local recycling facilities and/or the manufacturer of your headphones for further information.
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could
FCCID:2AL9B-MUZ4011
void the user’s authority to operate the equipment. This device complies with
Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may
cause undesired operation. This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>