kogan NC35 Noise Cancelling Headphones User Guide
- June 3, 2024
- Kogan
Table of Contents
kogan NC35 Noise Cancelling Headphones User Guide
OVERVIEW
Headphones
- Microphone
- ANC Switch
- LED Indicator
- USB-C Charging Port
- 3.5mm Line in Socket
- Volume Down/Previous Track
- Multifunction Button
- Volume Up/Next Track
- Power Switch
Audio Cable
OPERATION
Power on/off
- To turn the headphones on, press and hold the Power button (9) until the Status LED (3) blinks BLUE and RED.
- To turn the headphones off, press and hold the Power button again until the Status LED blinks RED.
ANC on/off
- To turn noise cancellation on, short press the ANC switch (2). The LED indicator (3) will light up GREEN.
- To turn noise cancellation off, short press the ANC switch. The ANC LED will turn off.
Charging
- Connect the USB-C charging cable to the charging port (4) on the headphones.
- Connect the other end of the cable to a USB power adapter or a computer.
- The LED will turn RED during charging and turn off when the battery is fully charged. The LED will flash RED if the battery level is low.
WARNING: Do not use the headphones whilst they are charging.
Bluetooth pairing
-
Make sure the headphones are turned off.
-
Press and hold the Power button (9) for 5 seconds to enter pairing mode. The Status LED (3) will flash BLUE and RED.
-
Turn on Bluetooth on your device and search for “Kogan NC35 Headphones”, select it when found.
Note: Some devices may ask to confirm the headset connection after pairing. -
If pairing is successful, the status LED will blink BLUE. If no Bluetooth devices are paired within 3 minutes the headphones will turn off.
Line-in
- Turn off the Bluetooth and connect the microphone end of the supplied audio cable to the audio input socket (5) on the headphones.
- Connect the other end of the audio cable to the audio source.
Notes: You must turn the headphone off before connecting the cable if the Bluetooth mode has been activated. If the battery is depleted, the noise cancellation must be turned off if you want to use the 3.5mm audio cable.
General functions
+ & – button:
- Adjust the volume with the “+ & -” buttons (6 & 8).
- You can also skip to the next track or go to the previous by pressing and holding the corresponding button.
Multifunction button:
- To play or pause the current track, press the Multifunction button (7).
- To answer or end a call, press the Multifunction button (7). Press and hold it for at least 2 seconds to reject an incoming call. Double click the Multifunction button (7) to turn on voice assistant.
- Pressing the Multifunction button (7) three times will turn on game mode. Pressing the Multifunction key (7) another three times will turn off game mode.
SPECIFICATIONS
Bluetooth Version: V 5.3
Driver Size: 40mm
Impedance: 32Ω
Sensitivity: 110±3dB
Frequency Response: 20 Hz – 20kHz
Working Distance: Up to 10m
Cancellation Frequency Range: 40 Hz – 600 Hz
Cancellation Central Frequency: 100 Hz – 300 Hz
Cancellation Level: 20 dB±2dB
Battery Capacity: 3.7V,200mAh
Charge Input: 5 V,200mA
Charge Time: 2 Hours
Working Time: Up to 27h (21h with ANC ON)
Charging Port: USB-C
Charging Cable Length: 30cm
Audio Cable Length: 1.0m±10%
Need more information?
We hope that this user guide has given you the assistance needed for a simple set-up.
For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>