JVC HAEC25TA Sport True Wireless Earbuds Headphones Instructions
- June 14, 2024
- JVC
Table of Contents
JVC HAEC25TA Sport True Wireless Earbuds Headphones
[> When in Trouble
](https://manual3.jvckenwood.com/accessory/headphones/contents/ha- ec25t/en/YRWWSYdrduobpi.php) Restoring the settings to the initial state
Restoring the settings to the initial state
If no sound is heard from one side of the earphones or the earphones cannot be connected to your BLUETOOTH device, restoring the settings of earphones to the initial state may solve the problem.
Information of all the paired devices will be deleted (initialized). Perform pairing again from the start.
Start by deleting the registration information of the System from the
BLUETOOTH
setting on the BLUETOOTH device.
Charge the charging case beforehand.
Remove the earphones once if they are inserted into the charging case.
To restore the settings to the initial state, follow the steps below to initialize the settings of both the L and R earphones.
Start by restoring the settings of the L earphone to the factory default.
-
Insert the L earphone into the charging case.
After few seconds, the indicator on the charging case lights up.
-
When the indicator for L earphone is lighting up, press and hold the L touch sensor area for about 15 seconds.
Release your finger after the L indicator flashes twice.
After the indicator has flashed, the L side is restored to the initial state (factory default). The L earphone switches to the charging state and the L indicator lights up.
If the indicator does not flash, start over from step 1.
Next, restore the settings of the R earphone to the factory default. -
Insert the R earphone into the charging case.
After few seconds, the indicator on the charging case lights up. -
When the indicator for R earphone is lightning up, press and hold the R touch sensor area for about 15 seconds.
Release your finger after the R indicator flashes twice.
After the indicator has flashed, the R side is restored to the initial state (factory default). The R earphone switches to the charging state and the R indicator lights up.
If the indicator does not flash, start over from step 3. -
Remove the earphones from the charging case and set the L and R earphones side by side.
The L and R indicators light up and the power turns on. -
After a short while, the L indicator starts to flash quickly and repeatedly. The R indicator flashes twice slowly and repeatedly.
The settings are restored to the initial state (factory default). When the L and R indicators flash quickly, the earphones are now ready for device pairing. Pair the earphones with a device. Pairing (Registering a device)
When the sound only emits from one side of the earphones even when the earphones are connected to the BLUETOOTH device, touch and hold the touch sensor area on both earphones again to turn off the power and repeat the steps from the beginning.
WIRELESS HEADPHONES HA-EC25T
Contact & Support (English
Only)
© 2022 JVCKENWOOD Corporation
Documents / Resources
| JVC
HAEC25TA Sport True Wireless Earbuds
Headphones
[pdf] Instructions
HAEC25TA Sport True Wireless Earbuds Headphones, HAEC25TA, Sport True Wireless
Earbuds Headphones, Wireless Earbuds Headphones, Earbuds Headphones,
Headphones
---|---
References
- JVC Contact & Support | JVC
- Top | HA-EC25T | User manual
- Pairing (Registering a device) | HA-EC25T | User manual
- When in Trouble | HA-EC25T | User manual
- JVC
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>