WELD DYNAMIX WCA-1204-FXAH M12 4 Pin Female Field Attachable Connector Instruction Manual
- May 15, 2024
- WELD DYNAMIX
Table of Contents
WELD DYNAMIX WCA-1204-FXAH M12 4 Pin Female Field Attachable Connector
Product Specifications
- Model: WCA-1204-FXAH
- Type: Field Attachable Connector – Female
- Coating: Weld Resistant Coating
- Thread Size: M12 X 1
- Coding: A Coded
- Operating Temperature: 2°C to 21°C
- Pressure Rating: 24 bar
Product Usage Instructions
Pre-Installation Check
Before installation, ensure that the mating connector is compatible with the WCA-1204-FXAH. Check for any visible damage.
Installation Process
- Strip the cable to the required length.
- Insert the stripped cable into the connector body.
- Tighten the connector body to secure the cable in place.
- Check for proper alignment and tighten any locking mechanisms if present.
Testing and Verification
After installation, perform a continuity test to ensure proper electrical connections. Check for any signal loss or interference.
Frequently Asked Questions (FAQ)
Q: What is the recommended torque for tightening the connector body?
A : The recommended torque for tightening the connector body is 1.5 Nm.
Q: Can the WCA-1204-FXAH be used in outdoor environments?
A : Yes, the WCA-1204-FXAH is suitable for outdoor use, but ensure proper protection from moisture and dust.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>