anslut 024410 Dimmable Normal LED Bulb Instruction Manual

anslut 024410 Dimmable Normal LED Bulb

Product Information

• Model No.: MK/020011009839
• Brand: Jula
• Manufacturer: Jula AB
• Country of Origin: Sweden
• Product Name: SV DIMBAR NORMALLAMPA LED (Dimmable Normal LED Bulb)
• Power: 4.5 W
• Rated Voltage: 230 V
• Frequency: 50 Hz
• SocketType: E27
• Colour Rendering Index (CRI): 80
• Colour Temperature:1800 K (Extra warm white)
• Dimmable: Yes
• App Control: Yes
• LifeSpan: 20,000 hours

Product Usage Instructions

1. Before using the product, carefully read and understand the user instructions provided.
2. This LED bulb is designed for use with a standard E27 socket.
3. Ensure that the power supply is switched off before installing or removing the bulb.
4. Insert the bulb into the socket and twist it clockwise until it is securely in place.
5. Once installed, you can control the brightness of the bulb using a compatible dimmer switch or through an app (if applicable).
6. The bulb can be dimmed to your desired brightness level.
7. To turn the bulb on or off, use the main power switch or the app control.
8. This LED bulb has a long lifespan of approximately 20,000 hours.
9. Avoid using the bulb in damp areas as it is not suitable for such environments.
10. If the product reaches the end of its life or needs to be replaced, dispose of it according to local regulations for electronic waste recycling.
    Note : For any specific instructions related to app control or additional features, refer to the user instructions provided with the product or visit the manufacturer’s website at www.jula.com for the latest version of operating instructions.

Important! Read the user instructions carefully before use. Save them for future reference. Jula reserves the right to make changes. For the latest version of operating instructions, see www.jula.com

SAFETY INSTRUCTIONS

• The product is only intended for indoor use.
• The product must only be serviced by qualified personnel, otherwise, there is a risk of electrical accidents.
• Check that the mains voltage corresponds to the rated voltage on the type plate.

WARNING!

• Do not allow children to use the product.
• Do not dismantle the product or attempt to repair it. The product does not contain any parts that can be repaired by the user. Repairs must be carried out by an authorized service center.
• The product must only be used for its intended purpose and in accordance with these instructions.
• Do not use the product if it is damaged or not working properly, or if the power cord or plug are damaged. Discard the product if it is damaged and replace it with a new one.
• Do not expose the product to rain or moisture. Do not touch the power cord or the plug with wet hands.
• Do not subject the product to knocks and blows.

SYMBOLS

TECHNICAL DATA

• Rated voltage 230 V, 50 Hz
• Power 4.5 W
• Temperature range -20 – 40°C
• Diffusion angle 220°
• Frequency 2.4 GHz
• Socket E27
• Colour rendering index CRI 80
• Colour temperature 1800 K
• Colour tone Extra warm white
• Equivalent x W incandescent bulb 20 W
• Luminous flux 200 lm 360°
• Life span 20000 h
• Dimmable With app

DESCRIPTION

This is a SMART product that can be connected to existing WiFi and controlled via the app Smart Life, or with a voice assistant. Does not require a separate hub/router. You can control all SMART products in the app and use functions such as timer control, scheduling, and automatized events.

SYSTEM REQUIREMENTS
Check that the smartphone is connected to the 2.4 GHz WiFi network and switch on the light. WiFi router. iPhone, iPad (IOS 11.0 or higher) or Android (5.0 or higher). Compatible with Google Assistant, Amazon Alexa and others.

USE

INSTALL APP

1. Scan the QR code to download the Smart Life app. Or search on App Store or Google Play.
2. Register an account using your mobile phone number or email address. A verification code will be sent via SMS or email. Enter the code in the app and choose a password. If you already have an account, log in using your mobile phone number or email address and password.
   FIG. 2

CONNECT PRODUCT

1. Check that the phone is connected to the WiFi network and that the light is switch on.

2. The light source should flash rapidly on connection to the WiFi network. If the light source does not flash rapidly when the light is turned on with the switch, turn it on and off quickly three times to put the light in pairing mode.

3. Press + (add unit), select a suitable product category and follow the instructions on the screen.

4. Check that the LED light source is flashing rapidly (two times per second). If the LED light source does not flash, turn it on and off 3 times with the switch so that the LED light source starts flashing.

5. Confirm WiFi network and password.
   NOTE:
   Only Wi-Fi 2.4 GHz is supported.

6. The app finds the lamp and registers it on the account.

7. Enter the name for the unit.

NOTE:

The unit name is also used by Amazon Alexa and Google Assistant.

NOTE:

• Do not disconnect the power to the lamp when it is connected to the WiFi network. Use always the app to switching the lamp on and off.
• Activate Bluetooth on the smartphone before connecting the lamp.

MAINTENANCE

• Clean the outside of the lamp unit with a dry cloth.

NOTE:

• Do not use solvents, or strong or abrasive detergent.

EU DECLARATION OF CONFORMITY

Jula Item number
Model no.:MK/020011009839

Jula AB, Box 363, SE-532 24 SKARA, SWEDEN
This declaration of conformity is issued under the sole responsibility of the manufacturer.

LIGHT SOURCE
Conforms to the following directives, regulations and standards:/

This product was CE marked in year:
Signed for and on behalf of
Skara 2022-10-21

References

• Jula – products for home and garden

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>