SHANGRI-LA SLSERENDCWA Serengeti Console/Desk User Guide
- June 4, 2024
- SHANGRI-LA
Table of Contents
SHANGRI-LA SLSERENDCWA Serengeti Console/Desk
SAFETY & WARNINGS
Failure to follow these basic steps can lead to damage that is not covered by your warranty.
- Read instructions carefully. Ensure no parts are missing.
- Lay out all the components on a soft surface.
- Carefully identify each component, especially those that are similar. The most common mistake is getting things back to front.
- Do not fully tighten screws (leave slightly loose). When the item is fully assembled, tighten the screws but do not over tighten.
- Separate and identify each component from the hardware pack and rest each one in its proper location before fastening.
- Do not, for any reason, use a power tool to assemble this product. Use of power tools may apply greater than excess force on the fixtures, causing damage. Warranty is void if power tools have been used.
- A Phillips head screwdriver (not supplied) is required for assembly.
The user guide enclosed refers to multiple sets of metal slide runners and slide tracks (pictured above separately). To avoid any damage to these items during transportation, the slide runners and slide tracks have been pre- assembled together in pairs. Each pair includes a slide runner and slide track. Before assembling your new Shangri-La unit, please separate the slide runners from the slide tracks according to the below instructions.
- Step 1: Extend the slide runners apart from the slide track
- Step 2: Gently press the plastic release lever on the slide runner while pulling the slide runner and slide track apart from each other:
- Step 3: The slide runner and slide track should now be separated. repeat these steps for all remaining pairs of slide runners and slide tracks
COMPONENTS
Parts list
| No. | Dimensions (mm) | Qty |
|---|---|---|
| 1 | 348 x 767 x 28 | 1 |
| 2 | 348 x 767 x 28 | 1 |
| 3 | 350 x 1000 x 28 | 1 |
| 4 | 290 x 340 x 15 | 1 |
| 5 | 80 x 340 x 15 | 1 |
| 6 | 115 x 934 x 15 | 1 |
| No. | Dimensions (mm) | Qty |
| --- | --- | --- |
| 7 | 80 x 300 x 12 | 1 |
| 8 | 80 x 300 x 12 | 1 |
| 9 | 78 x 896 x 12 | 1 |
| 10 | 294 x 905 x 2.5 | 1 |
| 11 | 50 x 285 x 12 | 2 |
Hardware
ASSEMBLY
- Step 1:
- Step 2:
- Step 3: Use D screws to secure parts as shown. Use a Phillips head screwdriver to secure A to B for part 6.
- Step 4:
- Step 5:
- Step 6:
- Step 7:
- Step 8:
- Step 9:
- Step 10:
- Step 11:
- Step 12:
Move the drawer chest to the final position. Attach the safety strap to the wall. Make sure it is firmly attached and make sure it is snugly fit.
TOPPLING FURNITURE WARNING:
- It is strongly recommended that this product is permanently fixed to the wall.
- Please seek professional advice if you are in doubt of what fixing device to use.
- Regularly check that anchor are securely maintained.
- The stability of tall items may be affected by thick carpets or uneven floors.
- Do not place unanchored televisions on furniture.
Caution! For your safety when attaching the anchor fixings, please note the following: Check any electrical wires or plumbing inside the wall before drilling any holes (if you are unsure, please seek professional advice from a qualified tradesperson).
Need more information?
We hope that this user guide has given you the assistance needed for a simple
set-up. For the most up-to-date guide for your product, as well as any
additional assistance you may require, head online to
help.kogan.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>