kvm-tec Matrixline Full HD Extender Over IP User Guide
- June 3, 2024
- kvm-tec
Table of Contents
Quick Instruction
Check out our Installation Channel:
Support support@kvm-tec.com
Matrixline fiber MX2000 – F
6811 SET
6811L CPU/LOCAL
6811R CON/REMOTE
Full HD over IP
Matrixline Full HD Extender Over IP
Quick Installation MX2000 MATRIXLINE FIBER local / CPU – remote / CON
- Connect the CON / Remote and the CPU / Local Unit to the included 12V 2A power supply.
- Now connect the USB cable to a USB port on your PC and connect the other end of the USB cable to the CPU / Local Unit. Connect keyboard and mouse to the CON / Remote Unit.
- Connect the CPU / Local and the CON / Remote Unit with a fiber cable.
- Now connect the DVI cable to the DVI socket of the PC and the other end to the DVI socket of the CPU / Local Unit (DVI-in). Then connect the monitor to the CON / Remote Unit with a DVI cable.
- Then connect PC audio out with the audio cable to Local audio/in. Then connect audio/out via the audio cable
- Almost done! Now connect the audio cable Local audio/out to the PC audio/in and Remote audio/out with the audio cable to the microphone
HAVE FUN – your kvm-tec Extender is now in use for many years (MTBF approx 10 years)
kvm-tec Support
support@kvm-tec.com
Phone: +43 2253 81912 – 30
We are here for you to answer
your questions about installation?
Manual download www.kvm-tec.com
or
kvm-tec Installationchannel on our homepage
personally +43 2253 81912
Misprints, errors and technical changes reserved
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>