kvm-tec Industryline 24V Fiber Smart Connections Installation Guide

kvm-tec Industryline 24V Fiber Smart Connections

Instructions

LOCAL/CPU Unit

• 1 x MVX1-i-F local (CPU) without power supply

• 1 x Power Connector

• 1 x DVI – DVI cable 1,8m/5,9ft

• 1 x USB cable 1,8m/5,9ft

• 1 x VGA -DVi cable ,8m/5,9ft (opt)

• 1 x SFP Modul Multimode up to 500m/1640 ft.
  (alternativ with Single-Mode up to 20km/12 mi) ItemNr 6831

• 4 x rubber feet

REMOTE/CON Unit

• 1 x MVX1i-F remote (CON) without power supply
• 1 x Power Connector
• 1 x SFP Module Multimode up to 500m/1640ft.Item Nr 6832
• 4 x ruber fee

kvm-tec upgrades included

• Matrix Switching System up to 48 endpoints
• USB Memory,
• Analog VGA-transmitted as DVI

Check out our Installation Channel:

Quick Installation

INDUSTRYLINE FIBER local / CPU – remote/ CON

1.  Connect the CON / Remote and the CPU / Local Unit to the included 12V 1A power supply.
2. Now connect the USB cable to a USB port on your PC and connect the other end of the USB cable to the CPU / Local Unit. Connect keyboard and mouse to the CON / Remote Unit.
3. Connect the CPU / Local and the CON / Remote Unit with a network cable.
4. Now connect the HDMI-DVI cable to the DVI socket of the PC and the other end to the HDMI socket of the CPU/ Local Unit (PC-in). Then connect the monitor with the HDMI-DVI cable to the CON / Remote Unit.
   HAVE FUN – your kvm-tec Extender is now in use for many years ( MTBF approx 10 years)

kvm-tec Support
support@kvm-tec.com
Phone: +43 2253 81912 – 30

References

• Kvm-tec.com: KVM Extender over IP - Matrix Switching Systeme

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>