kvm-tec 4K Ultraline DP 1.2 UVX User Manual
- June 3, 2024
- kvm-tec
Table of Contents
kvm-tec 4K Ultraline DP 1.2 UVX
Follow Chart
VIDEO ADAPTER
Please use a video adapter with 60 Hz (for video adapters with 30 Hz the
screen will turn black and it would be a pity if you couldn‘t see the great 4K
image.).
OUR RECOMMENDATION
Club 3D – Type CAC – 1070.
FIBER CABLE
Please also use an OM3 cable to have enough bandwidth.
Connection
Quick Installation ULTRA LINE 4K
local/CPU–remote/CON
- Connect the CON/Remote and the CPU/Local Unit with the supplied IEC power cable. Optionally, you can also use a 12V > 2A power supply.
- Now connect the USB cable to a USB port on your PC and connect the other end to the CPU / Local Unit. Connect the keyboard and mouse to the CON / Remote Unit.
- Connect the CPU/Local and the CON/Remote Unit with a network cable.
- Connect the DP cable in the DP socket of the PC -in and to the DP socket DP/in of the local device and connect the screen on the remote side with the DP cable. Optionally, connect the DP cable from the Local DP/out to another monitor.
- Then connect PC audio/out with the audio cable to Local audio/in. Connect audio/out via the audio cable
- Almost done! Now connect the audio cable Local audio/out to the PC audio/in and Remote audio/in with the audio cable to the microphone.
HAVE FUN
Your kvm-tec Extender is now in use for many years (MTBF approx 10 years)
Please note that the recommended length of the display port cable should be max. 1.8m,5.9 ft otherwise interference-free 4K transmission may not be guaranteed.
Misprints, errors, and technical changes are reserved.
KVM-tec Supportkvm-tec Support
support@kvm-tec.com.
Phone: +43 2253 81912 – 30.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>