kvm-tec KT-6011L SMARTflex Full HD Extender Installation Guide

June 3, 2024
kvm-tec

kvm-tec KT-6011L SMARTflex Full HD Extender

Delivery Content

LOCAL/CPU Unit

  • 1 x SV local (CPU)
  • 1 x power supply unitl 12V 1A (EU-plug)
  • 1 x DVI – DVI cable 1,8m/5.9ft
  • 1 x USB cable 1,8m/5.9ft
  • 4 x rubber feet

REMOTE/CON Unit

  • 1 x SV remote (CON)
  • 1 x power supply unit 12V 1A (EU-plug)

CONNECTING

kvm-tec-KT-6011L-SMARTflex-Full-HD-Extender-FIG2

open the OSD main meu

The OSD main menu is opened with the default shortcut:
5 x ALT Gr (Attention: the first 20 seconds 5 x Scroll always works, in case the shortcut was forgotten. Switching list : CTRL+ALT+PRINT Changing the shortcuts in the OSD menu Go to the Remote Settings and then navigate to Keyboard Shortcut.

Quick Installation Smartflex Single local

/ CPU – remote / CON

  1. Connect the CON / Remote and the CPU / Local Unit to the included 12V 1A power supply.

  2. Now connect the USB cable to a USB port on your PC and connect the other end of the USB cable to the CPU / Local Unit. Connect the keyboard and mouse to the CON / Remote Unit.

  3. Connect the CPU / Local and the CON / Remote Unit with a network cable.

  4. Now connect the DVI cable to the DVI socket of the PC and the other end to the DVI socket of the CPU / Local
    Unit (PC-in). Then connect the monitor with the DVI cable to the CON / Remote Unit.

  5. Using a switch: Connect all endpoints to the switch. Ensure that all connections have a bandwith of 1Gbit/sec.

For video sharing the network has to support IGMP snooping.
HAVE FUN – your KVM-tec Extender is now in use for many years (MTBF approx 10 years)

ACCESS TO THE MAIN MENU

Use the monitor and keyboard to access the main menu
Access to the main menu (main menu):

  1. Make sure the extenders, monitors and computers are turned on.
  2. Press the Alt Gr key five times quickly. The main menu and an overview of the an overview of submenus is displayed.
  3. To enter a submenu, press the corresponding key.kvm-tec-KT-6011L-SMARTflex-Full-HD-Extender-FIG3

Main Menu

Main menu Short Cuts :

  • Status Overview
  • Features Overview
  • DDC Option
  • Local Settings
  • Remote Setting
  • Update Flash FW
  • About Overview
  • Exit

Status menu / current status

  • Features settings
  • DDC Option Fixed Setting 1020 x 1080
  • Settings Local
  • Settings Remote
  • Update firmware
  • Upgrade overview
  • Finish

SYSTEM STATUS

kvm-tec-KT-6011L-SMARTflex-Full-HD-Extender-FIG4

Single

kvm-tec-KT-6011L-SMARTflex-Full-HD-Extender-FIG5

Dual
The „Status Menu“ displays the current status of the extender connection. The menu shows information about the connection, the resolution of the video channel and the USB status. The activated upgrades and the current FW version are displayed in the upper left corner. Link status shows if a connection is possible. Connected shows if the kvm files can currently be transferred. Video and USB show if data is currently being transferred.

FIRMWARE VERSION DISPLAY
Make sure that the main menu is open. Under „A“ – About the currently installed firmware version of the remote (CON) and local (CPU) extender is displayed.

FEATURES MENU

Press the F key to enter the Features menu.

Features Menu

  • Point-to-Point Mode
  • Matrix Switching Mode
  • Freeze last Image
  • USB Emulation Mode
  • USB Save Feature
  • Diagnosis
  • Unlock Features
  • IP Management
  • Enabled/Disabled
  • (Point to Point excludes itself with Matrix mode)
  • Disabled/Enabled
  • (Disabled)Disabled/Enabled
  • (Disabled ) Disabled/Enabled
  • (mass storage usable) Disabled/Enabled
  • Diagnostic menu
  • Activate features
  • IP Management

POINT TO POINT
By pressing the “P” key you can switch the Point to Point mode off and on ATTENTION – if the Point to Point mode is activated, the Switching Mode cannot be activated.

MATRIX SWITCHING MODE
By pressing the “M” key, you can switch the Matrix Switching Mode off and on.

FLOW CHART

KVM-TEC
Gewerbepark
Mitterfeld 1 A
2523 Tattendorf
Austria
www.kvm-tec.com

IHSE USA LLC
1 Corp.Dr.Suite
Cranbury NJ 08512
USA
www.ihseusa.com

We are here for you to answer your questions about the installation.
Manual download www.kvm-tec.com
or
KVM-tec Installationchannel on our homepage personally +43 2253 81912

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals