kvm-tec KT-6014L MAXflex Full HD KVM Extender Instructions
- June 3, 2024
- kvm-tec
Table of Contents
kvm-tec KT-6014L MAXflex Full HD KVM Extender
First Aid MAXfl ex
kvm-tec Support
- support@kvm-tec.com
- Phone: +43 2253 81912 – 30
We are here for you to answer your questions about installation?
- Manual download www.kvm-tec.com
or kvm-tec Installationchannel on our homepage personally +43 2253 81912
MAXfl ex Single Copper redundant
- KT – 6014L CPU/LOCAL
- KT – 6014R CON/REMOTE
- www.kvm-tec.com
Delivery Content
- LOCAL/CPU Unit
- 1 x MA local (CPU)
- 1 x wall power supplyl 12V 1A (INT or EU-plug)
- 1 x DVI – DVI cable 1,8m/5.9ft
- 1 x USB cable 1,8m/5.9ft
- 4 x rubber feet
REMOTE/CON Unit
- 1 x MA remote (CON)
- 1 x wall power supplyl 12V 1A (INT orEU-plug)
- 4 x rubber feet
Open OSD menu
The OSD main menu is opened with the standard shortcut: 5 x
ALT Gr
(Attention: the fifirst 20 seconds 5 x Scroll always works, in case the
shortcut was forgotten.)
Switching list : CTRL+ALT+PRINT Changing the shortcuts in the OSD menu Go to the Remote Settings and then navigate to Keyboard Shortcut.
Quick Installation Maxflex Single local / CPU – remote / CON
- Connect the CON / Remote and the CPU / Local Unit to the included 12V 2A power supply.
- Now connect the USB cable to a USB port on your PC and connect the other end of the USB cable to the CPU / Local Unit. Connect keyboard and mouse to the CON / Remote Unit.
- Connect the CPU / Local and the CON / Remote Unit with a network cable.
- Now connect the DVI cable to the DVI socket of the PC and the other end to the DVI socket of the CPU / Local Unit (PC-in).
- Almost done! Connect the audio cable local audio/out to the PC audio/in and remote audio/out with the audio cable to the microphone
- Using a switch: Connect all endpoints to the switch. Ensure that all connections have a bandwidth of 1Gbit/sec. For video sharing the network has to support IGMP snooping.
HAVE FUN – your KVM-tec Extender is now in use for many years (MTBF approx 10 years)
USING THE ON-SCREEN MENU
Use the monitor and keyboard to use the main menu. To access the main menu:
- Make sure the extenders, the monitors and the computer are switched on.
- Press the ALT+GR key on your keyboard quickly five times. The main menu appears with an overview of the sub-menus.
- To open a sub-menu press the applicable key.
Main Menu
Main meu Short Cuts :
- S Status Overview Menu Status /current status
- U Update Flash FW Firmware Updates
- F Features Overview Settings Features
- D DDC Option DDC Option Fix settings 1020 x 1080
- L Local Settings Settings Local
- R Remote Settings Settings Remote
- A About Overview Overview Upgrades Upgrades
- Q Exit Exit
SYSTEM STATUS
Single
Dual
In the status overview menu, the current status of the extender connection is
displayed. It provides information on the connection itself as well as the
resolution of the video channel, and USB status. The enabled options and the
current firmware version is displayed in the left top corner. Link status
shows whether there is a physical connection available. Connected indicates if
kvm data is currently able to be transmitted. Video and USB show if data is
currently being transmitted.
VIEWING THE FIRMWARE VERSION
Under „A“ – About the currently installed firmware version of the remote (CON) and local (CPU) Extender is displayed (e.g. ‚4267‘)
FEATURES MENU
- P Point to Point Mode Enabled/Disabled (Point to Point Point to Point excludes itself with Matrix mode
- M Matrix Switching Mode Disabled/Enabled
- D Freeze last Image (Disabled)Disabled/Enabled
- E USB Emulation Mode (Disabled ) Disabled/Enabled
- S USB Save Feature (mass storage usable) Disabled/Enabled
- O Power Redundancy Alert Alert System
- C Diagnosis Diagnosis menu
- U Unlock Features Unlock Features
- L Link redundancy redundant Link for local Units
- I IP Management IP Management
POINT TO POINT
You can switch the Point-to-Point mode on and off by pressing the „P“ key
ATTENTION – if the point-to-point mode is activated, the switching mode
cannot be activated
MATRIX SWITCHING MODE
By pressing the „M“ button you can switch the Matrix Switching Mode off and on
- KVM-TEC Gewerbepark Mitterfeld 1 A 2523 Tattendorf Austria www.kvm-tec.com
- IHSE GmbH Benzstr.1 88094 Oberteuringen Germany www.ihse.com
- IHSE USA LLC 1 Corp.Dr.Suite Cranburry NJ 08512 USA www.ihseusa.com
- IHSE GMBH Asia 158Kallang Way,#07-13A 349245 Singapore www.ihse.com
- IHSE China Co.,Ltd Room 814 Building 3, Kezhu Road Guangzhou PRC www.ihse.com.cn
References
- KVM Solutions - Technology leader made in Germany – IHSE
- IHSE中国-光纤矩阵KVM切换器-IP KVM集成-电子竞技KVM扩展器解决方案-IHSE思奕科技
- Home - IHSE
- Kvm-tec.com: KVM Extender over IP - Matrix Switching Systeme
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>