AIRZONE AZAI6WSCDKA Aidoo Panasonic Wifi Controller User Manual
- June 4, 2024
- AIRZONE
Table of Contents
AIRZONE AZAI6WSCDKA Aidoo Panasonic Wifi Controller
AIDOO PANASONIC WI-FI CONTROLLER
Device to manage and integrate units remotely from the Cloud. Online control
with the “Airzone Cloud” App (available for iOS and Android). Wireless Wi-Fi
connection. Externally powered by the indoor unit.
Features:
- Control of the parameters of the unit.
- Communication errors detection.
- Temperature and operating mode time schedules.
- Multi-user and multi-session.
- Port for integration via Modbus protocol.
For further information about our products, go to airzonecontrol.com
TECHNICAL SPECS
Check the indoor units are compatible:
- Type of power supply Vdc
- Consumption 0.85 W
- Wire length 2.5 m (8.2 ft)
- Protocol 802.11b/g/n (802.11n up to 150 Mbps)
- Communication frequency / 2.4 GHz
- Maximum power – Antenna power / 20 dBm
- Sensitivity – 97 dBm
FCC
This device complies with FCC / ISED regulatory notices.
DEVICE ELEMENTS
- Cable Panasonic RS-485 port
- Indoor unit port
- Device reboot
- Association process reset
Important:
The unit controller must remain working in parallel with your Aidoo.
- Perform the assembly following the next step:
- Screw attachment.
- Double-sided adhesive attachment.
- Disconnect the indoor unit.
- Connect the Aidoo to the terminals of the indoor unit using the supplied number cable, R1 and R2.
- Power the indoor unit. Check the LEDs (see Self-diagnosis section).
- Download the app and follow the steps bellow for its setting. Access the support section to see the user manual.
important:
The equipment shall be supplied by a limited power source meeting class PS2 of
the standard IEC 62368-1.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>