AIRZONE AZAI6WSCMD1 Aidoo WiFi Control Instruction Manual
- May 15, 2024
- AIRZONE
Table of Contents
AIRZONE AZAI6WSCMD1 Aidoo WiFi Control
AIDOO WI-FI MIDEA / KAYSUN V5 PROTOCOL (XYE)
Device to manage and integrate units remotely from the Cloud. Online control
with the “Airzone Cloud” App (available for iOS and Android). Wireless Wi-
Fi connection. Externally powered by the indoor unit.
Features:
- Control of the parameters of the unit.
- Communication errors detection.
- Temperature and operating mode time schedules.
- Multi-user and multi-session.
- Port for integration via Modbus protocol.
For further information about our products, go to airzonecontrol.com
Contains FCC ID : 2AC7Z-ESPWROOM32
Contains IC: 21098-ESPWROOM32
TECHNICAL SPECS
Connection to indoor unit
| Type of power supply | Vdc |
|---|---|
| V max | 18 V |
| I max | 137.5 mA |
| V in | 12 – 16 V |
| Consumption | 0.85 W |
| Type of cable | Kaysun V5 (XYE) Midea |
| Wire length | 2.5 m (8.2 ft) |
WI-FI Communication
| Protocol | WI-FI – CERTIFIED TM 802.11b/g/n (802.11n up to 150 Mbps) |
|---|---|
| Model | ESP-WROOM-32 |
| Communication frequency | 2.4 GHz |
| Maximum power – Antenna power | 20 dBm |
| Sensitivity | – 97 dBm |
| IP address | DHCP |
Bluetooth Communication
| Protocol | Bluetooth v4.2 BR/EDR and BLE specification |
|---|---|
| Bluetooth class | Class-1, class-2 and class-3 transmitter |
RS-485 Port
Shielded twisted pair| 2 x 0.22 + 2 x 0.5 mm2 (AWG 23 – 2 wired + AWG 20 – 2
wired)
---|---
Communication protocol| RS-485 Par – 19200 bps
Operating temperatures
| Storage | – 20 … 70 ºC (- 4 … 158 ºF) |
|---|---|
| Operation | 0 … 45 ºC (32 … 113 ºF) |
| Operating humidity rango | 5 … 90 % (non-condensing) |
Mechanical aspects
| Protection class / | IP 41 |
|---|---|
| Weight | 130 g (0.29 lb) |
Check the indoor units compatible:
FCC / ISED
This device complies with FCC / ISED regulatory notices.
DEVICE ELEMENTS
Nº
| Description
---|---
1| Cable Midea / Kaysun V5 (XYE) //
2
| ****Puerto RS-485 / RS-485 port / Porta RS-485
3
| Indoor unit port
4
| Device reboot
5
| Association process reset
6
| **** Power supply
7
| External power input
SELF-DIAGNOSIS
| Nº | Meaning |
|---|---|
| **** | Connecting to WI-FI |
| Connected to WI-FI | Steady |
| Connected to the server | Steady |
| Not configured | Off |
| **** | Cloud communication |
| **** | Microprocessor activity |
| **** | Power supply |
| **** | Data transmission to the indoor unit |
| **** | interior Data reception from the indoor unit |
ASSEMBLY AND CONNECTION
Important: The unit controller must remain working in parallel with your Aidoo.
-
Perform the assembly following the next step:
a. Screw attachment.
b. Double-sided adhesive attachment. -
Disconnect the indoor unit.
-
Connect the Aidoo to the terminals of the indoor unit using the supplied number cable, XYE. Respect the polarity. X-Red, Y-Gray, E-Black.
-
Connect the Aidoo to power supply. Power the indoor unit. Check the LEDs (see Self-diagnosis section).
-
Download the app and follow the steps bellow for its setting. Access the support section to see the user manual.
Important: The equipment shall be supplied by a limited power source
meeting class PS2 of the standard IEC 62368-1.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>