AIRZONE AZAI6WSCPAN Aidoo WiFi Control PACi Air Conditioner Instructions

AIRZONE AZAI6WSCPAN Aidoo WiFi Control PACi Air Conditioner

Specifications

• Model: AIDOO WI-FI PANASONIC
• FCC ID: 2AC7Z-ESPWROOM32
• IC: 21098-ESPWROOM32
• Wireless Protocol: 802.11b/g/n
• Bluetooth Protocol: v4.2 BR/EDR and BLE
• Operating Humidity Range: 5% to 90% (non-condensing)
• IP Rating : IP41
• Power Input: 12-16 Vdc, max 18 V
• Power Consumption: 0.85 W
• Cable Length: 2.5 m (8.2 ft)
• Weight: 130 g (0.29 lb)

Product Usage Instructions

• Connecting and Setting Up:
  Connect the device to an indoor unit for power.

  • Ensure your Wi-Fi network meets the requirements for connectivity.
  • Download and install the Airzone Cloud App on your iOS or Android device.
  • Follow the in-app instructions to connect the device to your network.

• Using the Device:

  • The device allows you to manage and integrate units remotely from the Cloud using the Airzone Cloud App.

• Rebooting the Device:
  If needed, you can reboot the device by following these steps:

  • Ensure the device is connected to the Wi-Fi network.
  • Access the device settings in the Airzone Cloud App.
  • Select the option to reboot the device.

AIDOO WI-FI PANASONIC

Device to manage and integrate units remotely from the Cloud. Online control with the “Airline Cloud” App (available for iOS and Android). Wireless Wi-Fi connection.
Externally powered by the indoor unit.

DIMENSION

Features

• Control of the parameters of the unit.
• Communication error detection.
• Temperature and operating mode time schedules.
• Multi-user and multi-session.
• Port for integration via Modbus protocol.

For further information about our products, go to airzonecontrol.com

TECHNICAL SPECS

| Vdc
---|---
V max| 18 V
I max| 137.5 mA
V in| 12 – 16 V
Consumption| 0.85 W
Type of cable|  Panasonic connector
  Wire length

| 2.5 m (8.2 ft)

WI-FI Communication

Protocol

| WI-FI – CERTIFIED TM

802.11b/g/n (802.11n up to 150 Mbps)

---|---
Model| ESP-WROOM-32
 Communication frequency| ****

2.4 GHz

 Maximum power – Antenna power| ****

20 dBm

 Sensitivity| – 97 dBm
 IP address| DHCP

Bluetooth Communication

Protocol| Bluetooth v4.2 BR/EDR and BLE

specification

---|---
 Bluetooth  class| Class-1, class-2 and class-3

transmitter

RS-485 Port

Shielded twisted pair| 2 x 0.22 + 2 x 0.5 mm2 (AWG 23 – 2

wired + AWG 20 – 2 wired)

---|---
Communi- cation protocol| RS-485

Par – 19200 bps

Operating temperatures

(non-condensing)

Mechanical aspects

Check the indoor units are compatible:

DEVICE ELEMENTS

Indoor unit port

4| ****

Device reboot

5|  Association process reset

SELF-DIAGNOSIS

ASSEMBLY AND CONNECTION

Important: The unit controller must remain working in parallel with your Aidoo.

1. Perform the assembly following the next step:
   • a. Screw attachment.
   • b. Double-sided adhesive attachment.
2. Disconnect the indoor unit.
3. Connect the Aidoo to the terminals of the indoor unit using the supplied number cable, R1 and R2.
4. Power the indoor unit. Check the LEDs (see Self-diagnosis section).
5. Download the app and follow the steps below for its settings. Access the support section to see the user manual.

Important: The equipment shall be supplied by a limited power source meeting class PS2 of the standard IEC 62368-1.

FCC

This device complies with FCC / ISED regulatory notices.

FAQ

• Q: What should I do if the device is not connecting to the Wi-Fi network?
  • A: Make sure you are within range of the Wi-Fi signal and that your network settings are correct. You can also try rebooting the device and reconnecting it to the network.
• Q: Can I use the device with multiple indoor units?
  • A: Yes, the device can manage and integrate multiple units from the Cloud simultaneously.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>