AIRZONE AZCE8CM1DRY Dehumidifier Control Module User Manual
- June 1, 2024
- AIRZONE
Table of Contents
AIRZONE AZCE8CM1DRY Dehumidifier Control Module
Product Information
- Specifications
- Voltage: 110/230 Vac
- Current: 250 mA
- Frequency: 50/60 Hz
- Power Consumption: 1.2 W (110 Vac), 1.85 W (230 Vac)
- Communication: CAN bus
- Cable Type: Shielded twisted pair
- Cable Specifications: 2 x 0.22 + 2 x 0.5 mm2
- Max Voltage Rating: 250 Vac, 30 Vdc
- Max Current Rating: 12 A (250 Vac), 12 A (24 Vdc), 5 A (30 Vdc), 3 A (30 Vdc)
- Protection Rating: IP 21
- Weight: 180 g
Product Usage Instructions
- Device Elements
- The dehumidifier control module includes various device elements:
- Description: Provides information about the device.
- Meaning: Indicates the significance of different states.
- State: Represents the current status of the device.
- Device Reboot
- To reboot the device:
- Hold the reset button for 10 seconds.
- Observe the LED indicators for the reboot status.
- Assembly
- The dehumidifier control module is mounted on a DIN rail for easy installation.
- Connection
- Ensure proper connections are made as per the wiring diagram provided with the module.
FAQs
- How do I reset the device?
- To reset the device, hold the reset button for 10 seconds.
- What should I do if the LED indicators show a blinking red light?
- If the LED indicators show a blinking red light, it may indicate a specific error. Refer to the user manual for troubleshooting steps.
- Can I use this control module for both cooling and heating installations?
- Yes, this dehumidifier control module is designed for underfloor radiant installations that support both cooling and heating functionalities.
CONTROL MODULE
AIRLINE DEHUMIDIFIER CONTROL MODULE
- Dehumidifier control module for underfloor radiant (cooling and heating) installations.
- Externally power supplied at 110/230 Vac and wired communications.
- Mounted on DIN rail.
Functionalities:
- It has a relay to control the fan On/Off.
- It has a relay to control the pump On/Off.
- For further information about our products, go to airzonecontrol.com.
TECHNICAL SPECS
DEVICE ELEMENTS
| Nº | Description |
|---|---|
| 1 | Power supply |
| 2 | Pump control relay |
| 3 | Fan control relay |
| 4 | CAN connection bus |
| 5 | Device reboot |
SELF-DIAGNOSIS
DEVICE REBOOT
ASSEMBLY
To take the module away, pull the reed down to release it.
CONNECTION
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>