SPORTSTECH WBXs 250 SUP Board User Manual

WBXs (250/320/368)
SUP Board
User Manual

VC300 Vertical Climber

Dear customer,
We are pleased you chose a device from the SPORTSTECH product range. SPORTSTECH sports equipment offers you high quality and new technology.
In order to fully use the potential of your device and be able to enjoy it for many years, please read this manual carefully before starting up and beginning of training, and use the device according to the instructions. The operational safety and function of the device can only be guaranteed if the safety instructions in this user manual are observed. We shall not assume any liability for damages resulting from improper use or incorrect operation.

• Make sure that ALL persons using the device have read and understood this user manual. Keep this manual close to the device.
• Adhere to ALL Safety Advices in this manual.
• NEVER overexert yourself or others when using the device.

Our video tutorials for you!
Assembly, use, disassembly.

1. Scan the QR code
2. Watch videos
3. Start fast and safely

Link to the videos:
https://service.innovamaxx.de/vc300_video

We are also on social media!
Get the latest product information, training content and much more on our:

https://www.facebook.com/sportstech.de

SAFETY INSTRUCTIONS

RISK AWARENESS:
The use of the Sportstech product and its components can be dangerous and may cause injury or even the death of the user or third parties. By using the Sportstech product you accept all known and unknown, probable and unlikely injury risks. The risks associated with practicing this sport can be reduced by observing the warnings and instructions in this manual and taking all due care.

WARNING: FAILURE TO OBSERVE THE SAFETY RULES AND INSTRUCTIONS IN THE GUIDE OR THE PRODUCT MANUAL MAY RESULT IN INJURY OR IN EXTREME CASES DEATH. THEREFORE, READ THE MANUAL CAREFULLY AND, IF NECESSARY, CLARIFY ANY OPEN QUESTIONS WITH A LICENSED SUP TRAINER BEFORE USE.

• Always check the weather forecast before using the SUP board. Never use the product during thunderstorms or lightning in the sky.
• Always wear appropriate protective clothing and a life jacket.
• Make sure that the protective clothing is appropriate for the prevailing conditions: for example, use a wetsuit or a UV-repellent top.
• Cold outdoor and water temperatures can cause hypothermia. Always carry an identity document with you in case of emergency.
• Wear a helmet if necessary or appropriate.
• Do not exceed the maximum user weight of 110 (WBXs250) / 130 (WBXs320) / 150 kg (WBXs368).
• The SUP board is designed exclusively for use on shallow waters, such as lakes, rivers or the seashore, while standing or sitting. Use in high waves or for surfing is exclusively discouraged.
• Watch out for offshore winds or currents: These can quickly pull you out onto open water.
• Before each use, check your equipment for possible faults or signs of use. Do not use the SUP board if you notice heavy wear, a leak or other defects.
• Attach the supplied safety line to your foot as well as the SUP board each time you use it.
• Prior to your tour, tell a person your planned paddling route, place and time of departure, and planned place and time of arrival. Paddling alone is hereby expressly not recommended.
• Be considerate of other water sports enthusiasts and users, especially swimmers and children.
• Ensure that you are in control of the SUP board and paddle at all times.
• Check the maximum load capacity of the board and adhere to it.
• Do not inflate with a compressor.
• Never attempt stand-up paddling surfing in bad weather or heavy seas when steering or returning to the shore.
• Never jump head-first off the board into the water
• Be wary of riffs and currents and do not ride in rapids
• The paddleboard must not be attached to a boat and pulled
• Never let minors use the board without supervision
• Never drink alcohol or take drugs that interfere with your coordination, judgment and ability to control the board
• Use the paddleboard only with appropriate savvy and skill
• Never use the paddleboard after sunset, before dawn, or in low light conditions.
• Check local laws and regulations for the proper and safe use of this product.
• Never expose the paddleboard to direct sunlight outside the water.
• Do not expose the top cover to direct sunlight.
• Keep the board away from sharp objects.
• Tighten the valve before letting the board on the water. After use, release pressure toreduce air pressure.

ATTENTION/DANGER WARNING
No safeguard against drowning
MANDATORY POLICIES
First read the manual
Fully inflate all air chambers
Only suitable for swimmers
Number of users SUP: 1 adult / no children
Number of users platform: 3 adults

PROHIBITED
Use prohibited in whitewater
Use prohibited in breakwater
Use prohibited in undercurrent
Use prohibited in offshore wind
Not suitable for children

DELIVERY CONTENTS

• SUP BOARD
• SEAT
• LED DRY BAG WITH BLUETOOTH MUSIC
• FINISH WITH SAFETY CLIP
• HIGH PRESSURE PUMP
• FIBERGLASS DOUBLE PADDLE
• REPAIR KIT INCL. PVC PATCH
• SAFETY LINE
• PRACTICAL TRANSPORT BAG

TECHNICAL DATA

ALLGEMEINE DIMENSIONEN| SPORTSTECH /WBXs250| SPORTSTECH/WBXs320| SPORTSTECH/WBXs368
---|---|---|---
DIMENSIONS (LxWxH)| 250 X 86 X 12 cm| 320 X 83.5 X 15 cm| 368 X 83.5 X 15 cm
MAX. USER CAPACITY (PERSONS)| 1| 1-2| 1-2
MAX. LOAD BEARING CAPACITY| Max. 110 kg| Max. 130 kg| Max. 150 kg
MAX. PRESSURE| 0,83 – 1,24 bar
12 – 18 psi| 0,83 – 1,24 bar
12 – 18 psi| 0,83 – 1,24 bar
12 – 18 psi
VOLUME| 0,26 cbm| 0,4 cbm| 0,46 cbm

Please adhere strictly to the recommended maximum pressure and check with an air pressure gauge.
In case of pressure drop: Pump up again lightly

EXPLODED DRAWING/SPARE PARTS LIST

At the following link you will find the exploded drawing and the spare parts list:

https://service.innovamaxx.de/wbxs_spareparts

ASSEMBLY INSTRUCTIONS

1. Place the WBXs250/320 in a completely free space and make sure that there are no sharp and hot objects on the ground when rolling out

2. Check whether the valve is closed. For this, the PIN must be in the upper position at the height of the black ring. If this is not the case, turn the PIN 90 degrees counterclockwise.

3. Check if the valve is free from contamination.

4. Connect the hose of the supplied pump with sealing ring to the valve and snap it into place by turning the pump neck clockwise.

5. Pump up your WBXs250/320/368 with the supplied hand pump (it is best to fix the pump with both feet). Optionally, a suitable electric pump can be used.
   WARNING: Do not use a compressor! By using a compressor, the SUP board canbe damaged, all warranty claims expire when using a compressor. Never exceed the maximum pressure of 18 psi.

6. Recommended Pressure: 10 – 18 psi

7. Close the valve cover. Slide the fin into the mounting rail and secure it with the safety clip.

CARRYING/TRANSPORTING:

1. The carrying handles make the WBXs250/320/368 easy to carry, even when inflated: the easiest way to carry the WBXs250/320/368 is under the arm or in pairs at the front and back handles.
2. Always hold the fins in the direction of the body and, especially in the wind, be careful not to injure anyone with the board.

ActionCam Mount

1. Attach the mounting clip to the bracket on the WBXs250/320/368.
2. Slide the clip into the holder until it snaps into place
3. Make sure the connector is snug against the clip and the ActionCam is tight.

IMPORTANT: Thoroughly check all used hardware for optimal condition prior to each use to avoid damage or loss. The manufacturer assumes no liability for damage or loss

On the water:

1. The standard upright position is with the feet in the direction of motion underneath the carrying handle.

2. Always hold the paddle firmly.
   

3. Balance is akin to riding a bike: the greater the speed, the more stable the board will be.

4. The flexible fin is capable of sustaining ground contact. Nevertheless, damage may occur at higher speeds or in contact with a sharp ground.

Disassembly:

1. Disassemble the fin.

2. Clean and inspect your WBXs250/320/368 as well as the accessories (including paddle) after each use. Rinse everything to make sure any kind of residue or salt residue (when used in salt water) is removed. Use mild soapsuds or fresh water
   IMPORTANT: Do not use detergents or silicone-based cleaners!

3. Make sure the valve and the valve environment are free from water and dirt before removing the safety cap.

4. Open the valve cover and turn the PIN 90 degrees clockwise so that it is in the lowered position and the air can escape.

5. Insert your WBXs250/320/368 board from the opposite side of the valve with the inside deck and the fins on the outside.

6. Fix the WBXs250/320/368 with the included strap before packing. So it can be conveniently stowed in the included bag and unpacked later.

Das LED Dry Bag:

NOTE: Before using the product, it is critical for the user to fully charge the product with the provided USB cable for 2 hours. While charging, the Red LED indicator will be lighted and upon fully charged, it will be automatically switched off.

FURTHER NOTES:

1. When rolling the top of the bag to seal it, ensure that there is a 20cm gap between the rolling edge and the Wireless Speaker cum LED panel.
2. Do not dispose the product into fire or any combustible substance.
3. Do not use the product (light or speaker) when charging.
4. Do not store or carry any sharp objects inside the dry bag to avoid unforeseen damage.
5. Always fully charge the product via the USB before putting away the dry bag for a long time.

Specifications:

Functions:

Light Mode  > Press to change different light modes
Bluetooth-Modus > Long Press to ON or OFF
Bluetooth Speaker:|  To play, pair with Bluetooth Device “eflatables” with mobile phone
LED Light Mode:|    Music > RGB Colour lights changes with the played music
Breathing > RGB Colour lights fades in and out
Night Light > Whte Light at Normal Brightness
Bright Light > White Light at Exta Brightness
SOS Signal > Red Light flashes according to international SOS signal
Charging Time:|  Solar Charging at 10 to 12 hours under direct sunlight
USB Charging at 2 hours (cable included)
Charging indicator:| Solar or USB Charging in progress = Red light
Bluetooth in Operation = Green Light
Full Charge = Lights off

STORAGE, CARE AND MAINTENANCE INSTRUCTIONS

1. Release the air and remove the fin.

2. Clean and inspect your WBXs250/320/368 as well as the accessories (including paddle) after each use. Rinse everything to make sure any residue or salt residue (when used in salt water) is removed. Use mild soapsuds or fresh water.
   IMPORTANT: Do not use detergents or silicone-based cleaners!

3. Leave the valve open while rolling up the WBX250/320/368 in the direction of the valve. Close the valve to prevent it taking in any of moisture and dirt.

4. Please store your WBXs250/320/368 in a sufficiently spacious, clean and dry place.
   Temperature fluctuations and other harmful factors have been taken into consideration. Store it without air, rolled up. Protect it from rodents.

5. Disassemble the paddle and store the individual parts separately.

The SUP boards WBXs250/320/368 are of the highest quality and very durable, but avoid the following in any case:

• The WBXs250/320/368 must not come in contact with sharp or hot objects.
• Do not leave your WBXs250/320/368 in the sun for an unnecessarily long time.

PROBLEMS AND TROUBLESHOOTING

adjustment
| Valve cover was incorrectly turned on| Correct the valve cover
| Loose valve| Tighten the valve
| Hole| Repair

Repairs
The scope of delivery includes a repair kit / PVC patch for repairing small holes. Most leaks can be fixed in a few minutes.

Air loss:
If your board seems a bit soft, there is not necessarily a leak. The ambient temperature influences the internal pressure of the chamber: A deviation of 1 ° C results in a pressure deviation in the chamber of +/- 4 mbar (.06 psi). If the board was inflated late in the evening, it could cause the air to cool overnight.
The cooler air leads to less pressure, so it can be less inflated the next morning. If there is no temperature deviation, you must first find out where the air escapes.

Please note the following procedure:

1. Check whether there is sand or dirt in the valve.
2. Make sure the valve seal is properly positioned.
3. Rinse the SUP board surface and also the valve surround with soapy water.
4. When bubbles form, there is a leak and needs to be repaired.

Small repairs : First let the air out. Thoroughly clean the board (vinyl cleaner can be used for this purpose) and dry the area to be repaired. For a smaller hole, apply a small drop of glue (not included). Let the glue dry for 12 hours. (For minor repairs, use a soft plastic adhesive that is waterproof and heat resistant).

Please note: For the repairs, the air must be drained and the board must lie flat.

1. Thoroughly clean the area surrounding the leak. Remove any dirt.
2. 2Cut a piece from the original patch. The piece should be large enough sothat the damaged area is overlapped by about 1.5 cm. Use a ballpoint pen to set the size of the patch. Round off the corners.
3. Apply a thin layer of adhesive (not included) to the bottom of the patch and to the area to be repaired. Allow the glue to dry for 2 – 4 minutes until it appears milky.
4. Place the patch on the damaged area and press firmly. Please do not use the board for the next 24 hours to allow the adhesive to take maximum effect.

 DISPOSAL

Dear customer,
As an end user, you are legally obliged to collect waste electrical and electronic equipment and batteries as well as accumulators separately from municipal waste. We want to make this as easy as possible for you. Please note the information on this page and on the back.
Notes on EU directive 2012/19/EU (in Germany implemented in ElektroG (Law about electric and electronic devices); elsewhere implementation may differ)
We advise owners of electric and electronic equipment that waste electrical and electronic equipment must be collected separately from municipal waste in accordance with the applicable legal regulations. The symbol of a crossed-out garbage can, which is shown on waste electrical and electronic equipment, also indicates the obligation to collect this waste separately.

B. Notes on disposal and symbols for an electrical appliance based on EU Directive 2006/66/EU (in Germany in accordance with the Battery Act (BattG); elsewhere, implementation may differ)
**** Old batteries and accumulators must not be disposed of with household waste. As an end user, you are legally obliged to return used batteries. The symbol with the crossed-out garbage can means that you are not allowed to dispose of old batteries in the household waste.
Use the official collection points for this, such as the collection points of public waste disposal carriers. You can also return used batteries to retail outlets, provided they sell batteries. If the symbol Cd, Hg, or Pb is displayed under the symbol of the crossed-out garbage can, this is an indication that the battery contains either cadmium, mercury or lead. These are toxic heavy metals that not only pose significant risks to the environment but also to human health.

Recycling loop
Packaging material can be conveyed back to the raw material cycle. Dispose of packaging material in accordance with legal provisions. Information can be retrieved from the return or collections systems of your community.

Information about included batteries
Information according to § 4 paragraph 4 Elektrogesetz

Information on the safe removal of the batteries or accumulators

• The battery/rechargeable battery is located in a screwed plastic box, which in turn is welded. The removal is not possible without a certain effort.
• If you can remove the battery/rechargeable battery professionally, dispose of the battery/rechargeable battery and, if applicable, the device separately at the appropriate official collection point.
• If you cannot remove the battery/rechargeable battery, hand in the entire device to an official collection point. Please also note the locally applicable regulations.

CONFORMITY

Sportstech hereby declares that the radio system type [SP_DB] is compliant with EU Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://service.innovamaxx.de/drybag_conformity

Distributed by
Sportstech Brands Holding GmbH
Potsdamer Platz 11
10785 Berlin
+49 30 220 663 520
www.sportstech.de

References

• Fitnessgeräte für Zuhause online bestellen | SPORTSTECH
• Entsorgung | SPORTSTECH
• service.innovamaxx.de/drybag_conformity
• service.innovamaxx.de/wbxs_spareparts
• Tutorial & Support
• Instagram

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>