GetPal W336 3 in 1 Wireless Charger Instruction Manual

GetPal W336 3 in 1 Wireless Charger

FAQ

Phone Not Charging Consistently:

1. Ensure the case isn’t too thick and remove metal objects around the phone.
2. Adjust the phone to the correct charging position on the station.
3. If issues persist, unplug and plug back in the charging adapter after a few moments.

AirPods Not Charging:

1. AirPods 3rd gen or AirPods Pro with MagSafe cases are compatible.
2. 1st/2nd/3rd gen AirPods with Lightning cases are not supported.
3. Check your AirPods package or order to confirm wireless charging support.

Watch Not Charging:

1. If the watch is not charging, unplug and plug back in the charging adapter after a few moments.
2. Update the watch software through the Watch app on your phone by navigating to General > Software Update.

Package Contents

Warm Tips

To ensure charger perform normally, please use:

• Quick Charger Included
• Charging Cable Included
• Wireless Charging Friendly Device Cases

How to Use

Cases Should Avoid

Correct Usage

Universal Compatibility

7.5W: For Apple iPhone

• iPhone 11 to 15 Series
• iPhone 8 & X Series

10W: For Samsung Galaxy

• Galaxy S8 & S9, S20 to S23 Series
• Galaxy Note 8-10 & 20 Series

3W: For Apple AirPods

• ONLY SUPPORT Apple Airpods 3rd Gen or AirPods Pro with MagSafe Charging Case
• NOT SUPPORT Apple Airpods 1st/2nd/3rd Gen with Lightning Charging Case

2.5 W: For Apple Watch

• Apple Watch SE & Ultra
• Apple Watch 2 to 9

Safety And Get Help

1. Please use the original quick charger and cable to charge.
2. DO NOT put metal or magnetic objects in the charging areas.
3. If the charging station causes overheating to your device, please check to confirm whether you use the charging station properly.

If you have any inquiries, send your request with Order Number to: support@getpals.net

Troubleshooting for Charging Issues

Phone Not Charging Consistently

1. Make sure the case isn’t too thick, and remove metal objects.
2. Adjust phone to the correct charging position.
3. Unplug the charging adapter and plug it back in after a few.

AirPods Not Charging

1. AirPods 3rd gen or AirPods Pro with MagSafe cases are compatible.
2. 1st/2nd/3rd gen AirPods with Lightning cases are not compatible.
3. Check your AirPods package or order to make sure your AirPods support wireless charging.

Watch Not Charging

1. Unplug the charging adapter and plug it back in after a few.
2. Update watch software through Watch app on the Phone > General > Software Update.

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The FCC certification of this device refers to RF exposure testing performed in typical operating conditions, where a person is no closer than 20 centimeters from the device surface at all times, except for non-repetitive patterns with transient time intervals in the order of a second. Only in the stated conditions, the device is shown to fully comply with the FCC RF Exposure requirements of KDB 447498.

References

• FinePrint | Print the way you want

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>