PDQ 63-6400 Retrofit Instructions

PDQ 63-6400 Retrofit

REMOVE DEVICE FROM DOOR AND REMOVE FILLER PLATE

• Slide filler plate away from pushbar
• If plastic filler plug remains inside main rail, remove and reinstall into filler plate

REMOVE EXISTING DOGGING ASSEMBLY

• • Remove (2) screws that are securing dogging plate, if applicable
• If no dogging is present, remove locking screw
• Discard dogging plate

REMOVE CHASSIS HEAD FROM PUSHBAR

• Slide rail away from chassis head, head filler will disengage from rail
• Remove rail from pushbar assembly

INSTALL TRIGGER PLATE

• Install trigger plate on bottom of pushbar assembly
• Verify trigger arm is within groove in linkbar
• Install Christmas tree rivet to secure trigger plate

INSTALL ALARM KIT/ SS TO BACKPLATE

• Secure dogging assembly to backplate
• Slide pushbar assembly into rail and install securing screw

CALIBRATE ALARM / WIRESS

• Refer to Alarm kit instructions for calibration instructions
• Refer to electrical specification datasheet for SS

Visit pdqlocks.com for most recent revision

63/6400 Pinout

Function| Color
MLR| Black
MLR| Black
REX (COM)| Yellow
REX (N/O)| Red
REX (N/C)| Gray
LM (COM)| Black
LM (N/O)| Brown
LM (N/C)| Blue

REINSTALL CORRECT FILLER PLATE

• Reinstall filler plate
• Reinstall device on door

639421 Rev0 – 6-14-22

References

• pdqlocks.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>