PDQ OE-9700 KMS Wireless Electric Deadbolt Installation Guide
- June 1, 2024
- PDQ
Table of Contents
PDQ OE-9700 KMS Wireless Electric Deadbolt
PREPARE DOOR & INSTALL LATCH
- Prepare door according to template.
- Retract deadbolt
- Install adjustable latch with cross slot for tailpiece toward bottom.
- Secure with (2) small combo screws.
INSTALL OUTSIDE TRIM ASSEMBLY
- Install escutcheon/chassis assembly from outside of door – feeding reader wire through chassis hole in door – under latch.
Left Hand Door – Rotate tailpiece clockwise until it stops in the
vertical orientation.
Right Hand Door – Rotate tailpiece counterclockwise until it stops in the
vertical orientation.
INSTALL GASKET & INSIDE MOUNTING PLATE
- Route wire through slot in bottom of gasket and mounting plate.
- Install rubber gasket and inside mounting plate and secure with (2) pan head screws.
INSTALL INSIDE TRIM AND BATTERIES
- Plug reader wire into socket on control board on back of escutcheon, route wire through hook in mounting plate as shown, install escutcheon onto door.
- Take care to keep from pinching wire.
- Verify that thumb turn properly operates deadbolt latch smoothly.
- Secure escutcheon with (2) pan head screws.
- Install batteries and battery cover with pan head screw.
Phone: 866-874-3662
www.pdqlocks.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>