OPTICAL AA17053 Fiber Optic Terminal Box User Manual
- June 11, 2024
- Optical
Table of Contents
Operation manual
Model: AA17053
AA17053 Fiber Optic Terminal Box
Step 1.
Open the Fiber optic terminal box. Check and prepare installation tools and
accessories. To establish easy and safe installation put the box where it will
be installed and measure the required length of the cable. Prepare the safe
installation of the box.
Step 2
Prepare the cable according to the design of the opened box.
Strip the cable the required length, minimum 0.5 meter or more, to establish
easy and safe installation with enough buffer size. Pass the stripped cable
into the upper side of the splice tray.
Step 3.
Fix the cable strength member (3) on part (2) and stabilize with cable fixing
part (1) inside the box.
Step 4.
Coil the stripped cable in the splice tray (3). Splice the stripped cable with
the pigtails (2). Place the splice sleeves in the tray (1).
Step 5
Connect the spliced pigtails on the connectors. If you do not connect it with
another cable then put the dust protectors in the connectors!
Step 6
Close the box after finish basic light test or the measuring of all fibers.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>