concept VP 8080 Floor Vacuum Cleaner Instruction Manual

VP 8080 | VP 8081
Instruction Manual

ACKNOWLEDGEMENT

Thank you for purchasing a Concept product. We hope you will be satisfied with our product throughout its service life.
Please study the entire Operating Manual carefully before you start using the product. Keep the manual in a safe place for future reference. Make sure that any persons handling the vacuum cleaner are also familiar with this Operating Manual.

Technical parameters

| VP 8080| VP 8081
Voltage| 220–240 V ~ 50/60 Hz
Power input| 900 W| 900 W
Noise level| 80 dB| 80 dB
| Double or reinforced insulation

IMPORTANT SAFETY PRECAUTIONS

• Do not use this appliance in a way that is different from the instructions in this manual.

• Remove all packaging and marketing materials from the appliance before you use it for the first time.

• Make sure that the connecting voltage corresponds to the values on the appliance type label.

• Do not leave the appliance unattended when turned on or plugged into the electrical socket.

• Disconnect the appliance from the electrical socket when you are not using it.

• Never pull the supply cable when disconnecting the appliance from the electrical socket; pull the plug instead.

• Do not allow children or irresponsible people to handle the appliance. Use the appliance out of the reach of these people.

• Handicapped people, people with impaired faculties or mental capabilities, or people unfamiliar with the appliance operation are only allowed to use it when supervised by responsible, knowledgeable people.

• Be especially careful when there are children near the appliance.

• Do not allow the appliance to be used as a toy.

• Do not use the appliance outdoors or on wet surfaces as there is a threat of electric shock in these places.

• Do not use any other accessories except those recommended by the manufacturer.

• Never use the appliance if the supply cable or plug has been damaged; have the defect repaired immediately by an authorized service center.

• Never run over the supply cable with the floor attachment or the appliance itself.

• Provided the rotary brush is used, it may be dangerous to run the appliance over the supply cable.

• Never pull the supply power cord or use it to carry the appliance.

• Keep the appliance away from any sources of heat, such as radiators, ovens, etc. Do not expose the
  appliance to direct sunlight or moisture.

• Do not touch the appliance with damp or wet hands.

• Do not insert any items into the openings. Do not use the appliance if any of these openings is obstructed.

• Unplugging the appliance from the wall socket, first turn off the main switch, then pull the plug out of the electric voltage socket.

• Take extra care when using the appliance on stairs.

• If the appliance‘s suction inlet becomes obstructed, turn the appliance off and remove any obstructing dirt before turning the appliance on again.

• Hold the supply cable while winding it in order to avoid uncontrolled movement.

• Before fixing any accessories, cleaning, or in the case of a defect turn off the appliance and pull the plug out of the electrical socket.

• Unwind the necessary length of the power supply cord before using the appliance. The ideal length of the power supply cord is marked by a yellow dot on the cord. Do not unwind the power supply cord past the red mark.

• The appliance is intended for household use only (not for commercial use).

• Do not vacuum any burning items such as cigarettes, matches, or hot ash.

• Do not use the appliance in wet rooms; do not vacuum any wet items or liquids, flammable liquids (such as petrol), and do not use the appliance in places where these substances may be present.

• Never vacuum without using the dust collection bag or the appliance‘s filters. Before each using the appliance, make sure the dust collection bag and the appliance‘s filters are properly installed.

• Do not immerse the supply cable, the plug, or the appliance itself into water or any other liquid.

• Check the appliance and the supply cable regularly for any damage. Never turn the appliance on if it is damaged.

• Prior to cleaning and after using the appliance, turn it off, disconnect it from the electric voltage outlet, and let it cool.

• Before using the appliance, remove any large or sharp items from the surface you want to vacuum as these items may damage the dust collection bag or the appliance‘s filters.

• Do not use the appliance if the filters are dirty.

• Never repair the appliance by yourself. Instead, contact an authorized service center for repair.

• This appliance may be used by children 8 years of age and older and by persons with physical or mental impairments or by inexperienced persons if they are properly supervised or have been informed about how to use the product in a safe manner and understand the potential dangers. Children must not play with the appliance. This appliance may be cleaned by children 8 years of age and older if they are properly supervised. Keep this appliance and the power cord out of reach of children younger than 8 years of age.

Failure to follow the manufacturer‘s instructions may invalidate the warranty.

PRODUCT DESCRIPTION

1 Hose holder
2 Telescopic tube
3 Air discharge filter HEPA
4 Floor attachment
5 Flexible hose
6 Power cord winding button| 7 Dust collection bag fill indicator
8 ON/OFF button
9 Carrying handle
10 Front cowl clap
11 Rubber-coated wheels
---|---

ACCESSORIES
A Slotted nozzle
B Nozzle for upholstery
C Nozzle for wooden floors (VP8080)
D Turbo brush (VP8081)

OPERATING MANUAL ASSEMBLY OF THE VACUUM CLEANER

NOTE
Before fixing or removing accessories, always pull the plug out of the electrical socket!

1.  Connecting the flexible hose to the appliance
   Insert the flexible hose into the appliance‘s air suction inlet.
   Continue pushing until you hear a clicking sound, which indicates that the correct position has been reached.
   For removing the flexible hose, press both stopper buttons and remove hose (Fig. 1). When the slide throttle is closed, the airflow is stronger.
   Slide throttle in open position – weaker airflow.

2. Attaching the telescopic tube to the hose adapter Put the telescopic tube on the hose adapter and turn it slightly.

3. Extending the telescopic tube
   Press the plastic latch and pull the smaller tube outwards.

4.  Fixing the floor attachment to the telescopic tube
   Insert the telescopic tube into the floor attachment and turn it slightly.
   The flap (Fig. 2) is used for setting the floor attachment for brushing (for smooth floors), or to smooth vacuuming (for carpets).

ACCESSORIES

1. Slot nozzle
   The slot nozzle adapter is used for vacuuming places that are difficult to access, such as radiators, slot corners, pedestals, spaces between upholstery, and others.

2. Upholstery nozzle
   This upholstery nozzle attachment may be used for smaller upholstered areas.

USING THE APPLIANCE
Before using the appliance, make sure that filters and the dust collection bag are properly positioned and mounted. Unwind the supply cable length you need. The yellow mark on the supply cable indicates the optimum cable length. Do not unwind the supply cable beyond the red mark!

1. Insert the plug into the electric voltage socket.
2. Press the ON/OFF switch on the appliance.
3. After you have stopped vacuuming, switch the appliance off and disconnect it from the electric voltage outlet.
4. For winding up the supply cable, press the winding button with one hand and hold the supply cable with the other hand to avoid uncontrolled movement.

CHECKING THE DUST COLLECTION BAG FILL
When the dust collection bag fill indicator turns red during operation, replace the full dust collection bag immediately.

If the dust collection bag fill indicator is still red after the bag has been replaced, this may be due to several causes:
– some of the air passages (hoses, telescopic tube, suction inlet, brush adapter, or other adapters) are obstructed;
– the motor filter is dirty;
– the air outlet filter is dirty.
Check for each of the possible causes above and eliminate the problem before you start vacuuming. If the cause of the problem cannot be identified, hand over the product to the nearest service center. Never use the vacuum cleaner if the bag level indicator is completely red during operation. The motor could be damaged irreparably

CLEANING AND MAINTENANCE

You may clean the accessories and the appliance with a wet cloth. Never immerse the appliance in the water!
Do not use any aggressive substances for cleanings, such as solvents or abrasives!

REPLACING THE DUST COLLECTION BAG

1. Unplug the product from the mains. Disconnect the hose from the suction inlet and open the appliance cover.
2. Push the flap on the dust retention bag holder; remove the used dust retention bag (Fig. 3). Dispose of a paper or SMS dust collection bag. Be careful not to tear the bag when handling. If the bag is made of fabric, empty it and close it carefully – it can be used repeatedly.
   | |
   ---|---|---
3. Insert a new or empty dust retention bag by fitting the plate in the bag holder. The bag opening must be aligned with the hose hole in the appliance cover.
4. Never use the vacuum cleaner without the dust bag installed! If you forget to insert the dust retention bag or you insert it incorrectly, the appliance‘s motor may become damaged.
5. Close the cover. Press until you hear a click.

CLEANING AND REPLACEMENT OF THE MOTOR FILTER

1. Disconnect the flexible hose and open the appliance cover.
2. Pull the dust collection bag out of its holder so that you can access the motor filter more easily.
3. Remove the motor filter (Fig. 4). You can clean the filter by tapping it. If the filter is heavily soiled, you may wash it in lukewarm water and let it dry properly.
4. Insert the cleaned or new motor filter into the appliance and close the cover.

CLEANING AND REPLACING THE AIR OUTLET FILTER

1. Open the air outlet grid in the appliance‘s rear section (Fig. 5).

2. Remove the air outlet filter. You can clean this filter by tapping it, then brushing it with a soft brush. After this operation is complete, you may clean a very dirty filter by washing and brushing with a soft brush in lukewarm water with no cleaning agents added. It is important to let the wet parts dry thoroughly. A wet filter will be damaged by vacuuming! Do not use a hair dryer to dry it!
   Note: Wet cleaning may cause more wear and tear on the filter and, consequently, may shorten its service life.

3. Insert the cleaned or new air outlet filter into the appliance and close the air outlet grid.

TROUBLESHOOTING

Motor has stopped
operating.| Improper or insufficient airflow. Motor overheating fuse activated.| Disconnect the cable from the socket. Check and release the air suction and discharge holes; check the filter’s cleanliness and/or replace the dust bag. Let the vacuum cleaner cool down.
The front cover cannot be
closed| The dust bag was inserted incorrectly.| Check the dust filter installation.
Reduced suction power| Dust bag full or clogged.| Replace the dust bag.
Obstructed filter.| Clean or replace the filter.
Clogged nozzle, tube, or hose.| Check and clear the air passage on the suction and discharge sides.
The vacuum cleaner heats up| Slight heating of the vacuum cleaner is normal and cannot be considered a failure.

OPTIONAL ACCESSORIES

The following appliance accessories can be purchased additionally:
Dust bags (5 units + 2 units of motor filters)
Order code SMS9000 Price according to the valid price list

SERVICE
Any larger maintenance or repairs requiring intervention into the internal parts of the product shall only be performed by an authorized service

ENVIRONMENTAL PROTECTION

• Packaging materials and obsolete appliances should be recycled.
• The transport box may be disposed of as sorted waste.
• Polyethylene bags shall be handed over for recycling.

Appliance recycling at the end of its service life:
A symbol on the product or its packaging indicates that this product should not go into household waste. It must be taken to the collection point of an electric and electronic equipment recycling facility. By making sure this product is disposed of properly, you will help prevent the negative effects on the environment and human health that would otherwise result from the inappropriate disposal of this product. You can learn more about recycling this product from your local authorities, a household waste disposal service, or in the shop where you bought this product.

This product meets all the basic EU regulation requirements that relate to it.
Changes to the text, design, and technical specifications may occur without prior notice and we reserve the right to make these changes.

Jindřich Valenta – Concept Czech Republic
Vysokomýtská 1800, 565 01 Choceň
Tel. +420 465 322 895, Fax: +420 465 473 304
www.my-concept.cz| ELKO Valenta – Slovakia, s.r.o.
Hurbanova 1563/23, 911 01 Trenčín
Tel.: +421 326 583 465, Fax: +421 326 583 466
www.my-concept.sk
---|---
Elko Valenta Polska Sp. Z. o. o.
Ostrowskiego 30, 53-238 Wroclaw
Tel.: +48 71 339 04 44, Fax: 71 339 04 14
www.my-concept.pl| Verners VT Ltd.
Piedrujas iela 5a, Riga, Latvia
Tel. + 371 67021021, fakss + 371 67021000
e-pasts: info@verners.lv, www.verners.lv

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>