TRIO LIGHTING 629210331 LED Ceiling Lamp Instruction Manual
- June 4, 2024
- TRIO LIGHTING
Table of Contents
TRIO LIGHTING 629210331 LED Ceiling Lamp
WARNING!
Before assembling, please read carefully the safety instructions!
Description of how the light works without the remote control unit
By the wall switch you can choice the following ligh modes
A + C + F (2700K), B + D + E (6000K)
A + C + F (6000K), B + D + E (2700K)
A + C + F + B + D + E (4000K)
Night light
You can select it, with short turn on and turn off of the lamp.
The most recently configured light settings is always displayed (memory
effect)
The status of the light scenario is saved after 15 seconds. In order not to
change the saved status of the
luminaire, the interval between restart processes must not be shorter than 2
seconds.
Description of how the light works with the remote control unit
The most recently configured light settings is always displayed (memory
effect)
The synchronous control of several lights is not foreseen.
Operation of the remote control
-
On
-
Off
-
& 4. Brightness regulator: The adjustment takes place in stages. By pressing for a short period, it is possible to control the individual stages. Pressing the button permanently results in the maximum or minimum brightness being reached.
-
& 6. The adjustment takes place in stages. By pressing for a short period, it is possible to control the individual stages. Pressing the button permanently results in the wärmest or coldest colour setting being reached.
-
Mode: Cyclical modes switch
-
A + C + F (2700K), B + D + E (6000K)
A + C + F (6000K), B + D + E (2700K) -
A + C + F + B + D + E (4000K)
Night light -
Night light
Set up remote control
Please disconnect the light from the mains for 10 seconds. Then switch the light on using the wall switch and at the same time press the “ON” button on the remote control. After about four seconds, the light confirms the successful programming by flashing several times. Now the light can be controlled with the remote control. The disengaging of the remote control works in the same way, except that the “OFF” button must be pressed instead of the “ON” button.
Declaration of Conformity
Hereby, Trio Leuchten GmbH. Gut Nierhof 17, D-59757 Arnsberg, declares that
this product is in
compliance with Directive 2014/53/EU. The full text of the EU declaration of
conformity is available at the
following internet address: www.trio-leuchten.de
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>