BIETRUN WXM08 UHF Portable Dual Wireless Karaoke Microphone with Echo Bass Treble Instruction Manual
- June 6, 2024
- BIETRUN
Table of Contents
BIETRUN WXM08 UHF Portable Dual Wireless Karaoke Microphone with Echo
Bass Treble
Instructions for Mixing Microphones for Plano
Instructions
- Our product need to use with the Smart TV, phone, STE, video pal yer and other devices which has the connection of 3.Smm, RCA, or has the bluetooth function.
-
AUDIO OUTPUT”
-
“Headset”‘, “PHONE
-
AUX OUTPUT
-
Bluetooth device with A2DP
Attention:
Some smart TVs, set-top boxes, and other devices need to set the audio signal as external audio interface output in order to use the device correctly. If not, the device may have no sound even the wire connect well, which is not a problem with this product. As for the audio output Settings, please operate in the Settings menu. The device Settings way depends on different brands. Please refer to the device manual or consult the dealer. -
The digital AUDIO output interface without the above interface or marked only with the words “DIGTAL AUDIO OUT (COAXIAL, S/PDIF,OPTIAL, )” cannot connect this producT
Many smart TVS have the function of AV audio and video input. Although they have RCA or 3.5mm ports, they can’t export audio signals, so they can’t be used in this product.
Input connection
The audio source of the superior device is the RCA terminal outputs
The audio source of the device is 3.5mm terminal outputs.
Bluetooth device connection The smart device with bluetooth audio transmission function, search the bluetooth name “Bietrun 08” in the bluetooth device list and connect it
Output connection
The audio amplification equipment with 6.35mm, 3.5mm and RCA three audio input interfaces can be connected to this product, including multimedia speaker, Sound Bar, pull rod speaker, power player, mixer and etc.
- 3.5 the output interface connects to the RCA interface of the subordinate devices
- 3.5 output interface connect sub-device 3.5 interface
- 6.35 output interface connection.
Other operatings
Basic function of receiver
Basic function of microphone
How to solve problem
Specifications
Receiver
- Receiving frequency: U Band Sensitivity: 2mV
- Image interference ratio: >88dB Audio output: SOOmV-1 .4V Receive channel: 2
- Power consumption: 3W
- Handheld Microphone Carrier frequency: U Band Transmit power: 10mW Harmonic: <Main wave 40dB Pickup: 6000 single directivity Antenna: built-in
Complex Index
- Dynamic Range: >95dB
- Frequency response: 50Hz-18KHz(±3dBJ
- Frequency stability: <0.002% Interference frequency ratio > 90dB Signal to noise ratio: >9SdB
- Working range: Standard conditions 30 to 50 m
- Supply Voltage: 5V
- Antenna: universal antenna
- Frequency stability: <0.002%
- Current consumption: <25mA Standard: Fixed frequency
- Battery: 2*ANMIC (not included)
List of items
- 2X microphones (A, B)
- 1X receiving host
- 1X6.35 to 6.35 signal line
- 1X3.5 to 3.5 signal line
- 2×3.5mm toRCA signal line 1Xcharging line
- 1 X user manual
- System distortion(<1%, 1 K Hertz modulation
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.