PDQ Fire Rated GR2 Cylindrical Lock Instruction Manual
- October 30, 2023
- PDQ
Table of Contents
PDQ Fire Rated GR2 Cylindrical Lock
Product Information
Fire Rated GR2 Cylindrical Lock
- Door thickness: 1-3/8″ to 1-3/4″
- Backset: 2-3/4″
- Faceplate width: 1-1/8″
- Hole diameter: 2-1/8″
- Number of holes: 1
- Rose support plate included
- Fire-rated
Product Usage Instructions
- Prepare the door for installation.
- Install the latch and ensure proper mesh with the rose support plate.
- Install the lock.
- Install the rose and lever.
- Install the strike onto the frame using provided combo screws.
Re-Handing Instruction: Locks with-handed levers are shipped right-handed
(RH). To change the handing, remove the lever by inserting a pin through the
hole in front of the lever.
Outside Trim: This lock is available for both left-hand (LH/LHR) and
right-hand (RH/RHR) doors.
For more information, please contact PDQTEC at 833-2-PDQTEC or visit their
website at www.pdqlocks.com.
Dimension
PREPARE DOOR
- Full machining templates can be found on the website: www.pdqlocks.com
- Minimum stile width = 4 ¼”
INSTALL LATCH
- Install latch into front of door with bevel pointing toward door frame
- Secure using two combo screws
INSTALL LOCK
- Lock is preset from the factory for 1-3/4” thick door. To adjust, spin threaded rose until chassis is centered in door.
- Install lock chassis into thru hole in door making sure to properly engage ears of latch into lock chassis.
- Install rose support plate and secure with (2) screws
INSTALL ROSE AND LEVER
- Install rose – ensure indents on side of rose align with slots in rose support.
- Install lever by pushing on to spindle until clip engages with lever.
- Verify proper operation of lock
INSTALL STRIKE
- Install strike onto frame using provided combo screws.
RE-HANDING INSTRUCTION
- For Memphis Lever Only – 126/176 Functions
- Locks with handed levers are shipped RH
- Swap inside and outside levers.
- Use included pick to depress lever clip through hole in front of lever to remove.
- Phone: 833-2-PDQTEC www.pdqlocks.com
Documents / Resources
| PDQ
Fire Rated GR2 Cylindrical
Lock
[pdf] Instruction Manual
Fire Rated GR2 Cylindrical Lock, Rated GR2 Cylindrical Lock, GR2 Cylindrical
Lock, Cylindrical Lock, Lock
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>