AIRZONE AZAI6WSCDA1 Aidoo Wi-Fi Control Instructions
- June 4, 2024
- AIRZONE
Table of Contents
Contains FCC ID: 2AC7Z-ESPWROOM32
Contains IC: 21098-ESPWROOM32
AZAI6WSCDA1
AIDOO DAIKIN SKY AIR / VRV WI-FI CONTROLLER
Device to manage and integrate units remotely from the Cloud. Online control
with the “Airzone Cloud” App (available for iOS and Android). Wireless Wi-Fi
connection. Externally powered by the indoor unit.
Features:
- Control of the parameters of the unit.
- Communication errors detection.
- Temperature and operating mode time schedules.
- Multi-user and multi-session.
- Port for integration via Modbus protocol.
For further information about our products, go to airzonecontrol.com
TECHNICAL SPECS
Connection to the indoor unit
Connection to the indoor unit
Type of power supply| Vdc
V max I max V in| 18 V
| 137.5 mA
| 12 – 16 V
Consumption| 0.85 W
Type of cable| Daikin SKY AIR / VRV connector
Wire length| .5 m (8.2 ft)
WI-FI Communication
Protocol| WI-FI – CERTIFIED TM 802.11b/g/n (802.11n up to 150 Mbps)
Model| ESP-WROOM-32
Communication frequency| 2.4 GHz
Maximum power – Antenna power| 20 dBm
Sensitivity| – 97 dBm
IP address| DHCP
Bluetooth Communication
Protocol| Bluetooth v4.2 BR/EDR and BLE specification
Bluetooth class| Class-1, class-2 and class-3 transmitter
RS-485 Port
Shielded twisted pair| 2 x 0.22 + 2 x 0.5 mm
Communication protocol| RS-485 Par – 19200 bps
Operating temperatures
Storage| – 20 … 70 ºC (- 4 … 158 ºF)
Operation| 0 … 45 ºC (32 … 113 ºF)
Operating humidity range| 5 … 90 % (non-condensing)
Mechanical aspects
Protection class| IP 41
Weight| 130 g (0.29 lb)
Check the indoor units are compatible:
https://www.airzonecontrol.com/support/aidoo
FCC / ISED
This device complies with FCC / ISED regulatory notices.
http://doc.airzone.es/Certificates/Product/REG_AZ6_FCC_ELV_A4_MUL.pdf
DEVICE ELEMENTS
| Nº | Description |
|---|---|
| 1 | Cable Daikin SKY AIR / VRV |
| 2 | ****[RS-485 port |
](https://doc.airzone.es/producto/Gama_AZ6/Airzone/Aidoo/MI_AZAI6_MODBUS_A4_MUL.pdf)
3| ** Indoor unit port
4| ** Device reboot
5| Association process reset
SELF-DIAGNOSIS
| Nº | Significado / Meaning / Significado |
|---|
| Connecting to a WI-FI network| Blinking| Green
Connected to WI-FI network| Steady
Connected to the server| Steady| Blue
Not configured| Apagado Off Desligado| –
| Cloud communication| Blinking| Red
| Microprocessor activity| Blinking| Green
| Power supply| Steady| Red
| Data transmission to the indoor unit| Blinking| Red
| Data reception from the indoor unit| Blinking| Green
ASSEMBLY AND CONNECTION
Important: The unit controller must remain working in parallel with your Aidoo and its operating mode changed to “Sub RC” (Check the Instruction manual Daikin BRC1E52A7).
-
Perform the assembly following the next step:
a. Screw attachment.
b. Double-sided adhesive attachment. -
Disconnect the indoor unit.
-
Connect the Aidoo to the terminals of the indoor unit using the supplied cable, X35A / X18A, and P1 P2.
-
Power the indoor unit. Check the LEDs (see Self-diagnosis section).
-
Download the app and follow the steps below for its setting. Access the support section to see the user manual.
https://airzonecontrol.com/qrc/aidooAppPro
Important: The equipment shall be supplied by a limited power source meeting class PS2 of the standard IEC 62368-1.
https://www.airzonecontrol.com/support/aidoo
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>