kvm-tec KT-6024L MAXflex Full HD KVM Extender Instructions

: June 3, 2024
: kvm-tec

Table of Contents

kvm-tec KT-6024L MAXflex Full HD KVM Extender
Open OSD menu Open OSD menu
Quick Installation Maxfl ex Dual local / CPU – remote / CON
SYSTEM STATUS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

kvm-tec KT-6024L MAXflex Full HD KVM Extender

We are here for you to answer your questions about installation.

DDeliveliverery Cy Cononttenent LLOCOCAL/CPU UnitAL/CPU Unit

1 x M1 x MA2 local (A2 local (CPU)CPU)
1 x w1 x wall poll power supply 12V 1A (INT or EU-plug)er supply 12V 1A (INT or EU-plug) 2 x DVI – DVI cable 1,8m/5.9f2 x DVI – DVI cable 1,8m/5.9ftt
1 x USB cable 1,8m/5.9f1 x USB cable 1,8m/5.9ftt
4 x rubber f4 x rubber feeteet

REMOREMOTE/CTE/CON Unit ON Unit

1 x M1 x MA2 rA2 remote mode (e (CCON)ON)
1 x w1 x wall poll power supply 12V 1A (INT EU-plug)er supply 12V 1A (INT or EU-plug) 4 x rubber f4 x rubber fleet

the OSD main menu is opened with the standard short shortcut: 5 x cut: 5 x ALALT GrT Gr the fiction: the first 20 secret 20 seconds 5 x Sounds 5 x Scrcroll will always in case, in case the short shortcut cut was fas for got gotten.)en.) Switwitching list ching list : C: CTRL+ALTRL+ALT+PRINTT+PRINT ChangChanging the shoring the short cuts in the OSD menu in the OSD menu Go to the Ro the Remotemote Se Settings and then settings and then Navi navigate te to Keyboard Keyboard Short Shortt–cutout.

Quick Installation Maxfl ex Dual local / CPU – remote / CON

Connect the CON / Remote and the CPU / Local Unit to the included 12V 2A power supply.
Now connect the USB cable to a USB port on your PC and connect the other end of the USB cable to the CPU / Local Unit. Connect the keyboard and mouse to the CON / Remote Unit.
Connect the CPU / Local and the CON / Remote Unit with a network cable.
Now connect the DVI cable to the DVI socket of the PC and the other end to the DVI socket of the CPU / Local Unit (PC-in).
Now connect the DVI cable to the DVI socket of the PC and the other end to the DVI socket of the CPU / Local Unit (PC-in 2). Then connect the monitor with the DVI cable to the CON / Remote Unit.
Connect PC audio/out with the audio cable to local audio/in. Connect audio/out via the audio cable
Almost done! Connect the audio cable local audio/out to the PC Audio in and remote audio/in with the audio cable to the microphone
Using a switch: Connect all endpoints to the switch. Ensure that all connections have a bandwidth of 1Gbit/sec. For video sharing the network has to support IGMP snooping. Have fun – your KVM-tec Extender is now in use for many years (MTBF approx.10 years)

USING THE ON-SCREEN MENU
Use the monitor and keyboard to use the main menu. To access the main menu:

Make sure the extenders, the monitors, and the computer are switched on.
Press the ALT+GR key on your keyboard quickly five times.
To open a sub-menu press the applicable key.

Main Menu

Main menu Short Cuts: S Status Overview U Update Flash FW F Features Overview D DDC Option

Local Settings
Remote Settings A About Overview Q Exit Menu Status /current status Firmware Updates

Settings Features
DDC Option Fix settings 1020 x 1080 Settings Local

Settings Remote
Overview Upgrades Upgrades Exit

SYSTEM STATUS

VIEWING THE FIRMWARE VERSION
Under „A“ – About the currently installed firmware version of the remote (CON) and local (CPU) Extender is displayed (e.g. ‚4267‘)

Features Menu

Point-to-Point Mode
Matrix Switching
Mode Freeze last Image
USB Emulation Mode
USB Save Feature
Power Redundancy
Alert Diagnosis
Unlock Features
IP Management
Enabled/Disabled
(Point to Point Point to Point excludes itself with
Matrix mode
Disabled/Enabled
(Disabled)Disabled/Enabled
(Disabled ) Disabled/Enabled (mass storage usable)
Disabled/Enabled Alert System
Diagnosis menu
Unlock Features
IP Management

POINT TO POINT
You can switch the Point-to-Point mode on and oﬀ by pressing the „P“ key
ATTENTION – if the point-to-point mode is activated, the switching mode cannot be activated