kvm-tec KT-6013L-F Masterflex KVM Extender over IP Installation Guide

: June 3, 2024
: kvm-tec

Table of Contents

kvm-tec KT-6013L-F Masterflex KVM Extender over IP
CHART
CONNECTION
USING THE ON SCREEN MENU
Main Menu
SYSTEM STATUS
FEATURES MENÜ
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

kvm-tec KT-6013L-F Masterflex KVM Extender over IP

We are here for you to answer your questions about installation? Manual download www.kvm-tec.com or kvm-tec Installationchannel on our homepage personally +43 2253 8191

Check out our Installation

www.kvm-tec.com

MASTERfl ex MV1-F SINGLE REDUNDANT IN FIBER

KT-6013L-F CPU/LOCAL
KT-6013R-F CON/REMOTE

CHART

$kvm-tec-KT-6013L-F-Masterflex-KVM-Extender-over-IP-FIG- $6$$

CONNECTION

$kvm-tec-KT-6013L-F-Masterflex-KVM-Extender-over-IP-FIG- $1$$

Quick Installation Masterfl ex Single Fiber local / CPU – remote / CON

Connect the CON / Remote and the CPU / Local Unit to the included 12V 2A power supply.
Now connect the USB cable to a USB port on your PC and connect the other end of the USB cable to the CPU / Local Unit.
Connect keyboard and mouse to the CON / Remote Unit.
Connect the CPU / Local and the CON / Remote Unit with a network cable.
Now connect the DVI cable to the DVI socket of the PC and the other end to the DVI socket of the CPU / Local Unit (PC-in).
Then connect the monitor with the DVI cable to the CON / Remote Unit.
Opt: Connect PC audio/out with the audio cable to local audio/in. Connect audio/out via the audio cable
Almost done! Opt: Connect the audio cable local audio/out to the PC audio/in and remote audio/out with audio cable to the microphone
Using a switch: Connect all endpoints to the switch. Ensure that all connections have a bandwith of 1Gbit/sec. For video
sharing the network has to support IGMP snooping.

HAVE FUN – your kvm-tec Extender is now in use for many years (MTBF approx 10 years)

Use the monitor and keyboard to use the main menu.

To access the main menu:

Make sure the extenders, the monitors and the computer are switched on.
Press the ALT+GR key on your keyboard quickly five times.
The main menu appears with an overview of the sub-menus.
To open a sub-menu press the applicable key. $kvm-tec-KT-6013L-F-Masterflex-KVM-Extender-over-IP-FIG- $2$$

Main meu Short Cuts :

S Status Overview Menu Status /current status
U Update Flash FW Firmware Updates
F Features Overview Settings Features
D DDC Option DDC Option Fix settings 1020 x 1080
L Local Settings Settings Local
R Remote Settings Settings Remote
A About Overview Overview Upgrades Upgrades
L Link Redundancy
Q Exit Exit

SYSTEM STATUS

$kvm-tec-KT-6013L-F-Masterflex-KVM-Extender-over-IP-FIG- $3$$

Dual

In the status overview menu the current status of the extender connection is displayed. It provides information on the connection itself as well as resolution of the video channel, and USBstatus.
The enabled options and the current firmware-version is displayed in the left top corner.
Link status shows whether there is a physical connection available. Connected indicates if kvm data is currently able to be transmitted.
Video and USB show if data is currently being transmitted

VIEWING THE FIRMWARE VERSION

Under „A“ – About the currently installed fi rmware version of the remote (CON) and local (CPU) Extender is displayed (e.g. ‚4267‘)

FEATURES MENÜ

Features Menu

P Point to Point Mode Enabled/Disabled (Point to Point Point to Point excludes itself with Matrix mode
M Matrix Switching Mode Disabled/Enabled
D Freeze last Image (Disabled)Disabled/Enabled
E USB Emulation Mode (Disabled ) Disabled/Enabled
S USB Save Feature (mass storage usable) Disabled/Enabled
O Power Redundance Alert Alert System
C Diagnosis Diagnosis menu
U Unlock Features Unlock Features
L Link Redundancy
I IP Management IP Management
Q Exit

POINT TO POINT

You can switch the Point to Point mode on and off by pressing the „P“ key

ATTENTION – if the point to point mode is activated, the switching mode cannot be activated $kvm-tec-KT-6013L-F-Masterflex-KVM-Extender-over-IP-FIG- $5$$

MATRIX SWITCHING MODE
By pressing the „M“ button you can switch the Matrix Switching Mode off and on

KVM-TEC Gewerbepark Mitterfeld 1 A 2523 Tattendorf Austria www.kvm-tec.com
IHSE GmbH Benzstr.1 88094 Oberteuringen Germany www.ihse.com
IHSE USA LLC 1 Corp.Dr.Suite Cranburry NJ 08512 USA www.ihseusa.com
IHSE GMBH Asia 158Kallang Way,#07-13A 349245 Singapore www.ihse.com
IHSE China Co.,Ltd Room 814 Building 3, Kezhu Road Guangzhou PRC www.ihse.com.cn