kvm-tec KT-6021L SMARTflex Full HD Extender Installation Guide

June 3, 2024
kvm-tec

kvm-tec KT-6021L SMARTflex Full HD Extender

kvm-tec-KT-6021L-SMARTflex-Full-HD Extender-PRO

We are here for you to answer your questions about installation? Manual download www.kvm-tec.com or kvm-tec Installationchannel on our homepage personally +43 2253 8191

Check out our Installation

www.kvm-tec.com

MASTERflex MV1-F SINGLE REDUNDANT IN FIBER

  • KT-6021L CPU/LOCAL
  • KT-6021R CON/REMOTE

Delivery Content

LOCAL/CPU Unit

  • 1 x SV2 local (CPU)
  • 1 x power supply unitl 12V 1A (EU-plug)
  • 2 x DVI – DVI cable 1,8m/5.9ft
  • 1 x USB cable 1,8m/5.9ft
  • 4 x rubber feet

REMOTE/CON Unit

  • 1 x SV2 remote (CON)
  • 1 x power supply unit 12V 1A (EU-plug)
  • 4 x Gerätefüße

open the OSD main menu

The OSD main menu is opened with the default shortcut: 5 x ALT Gr
( Attention: the fi rst 20 seconds 5 x Scroll always works, in case the shortcut was forgotten.
Switching list: CTRL+ALT+PRINT
Changing the shortcuts in the OSD menu Go to the Remote Settings and then navigate to Keyboard Shortcut.

CHART

kvm-tec-KT-6013L-F-Masterflex-KVM-Extender-over-IP-FIG-
\(6\)

CONNECTION

kvm-tec-KT-6021L-SMARTflex-Full-HD Extender-1

Quick Installation Smartfl ex Dual local / CPU – remote / CON

  1. Connect the CON / Remote and the CPU / Local Unit to the included 12V 1A power supply.
  2. Now connect the USB cable to a USB port on your PC and connect the other end of the USB cable to the CPU / Local Unit. Connect keyboard and mouse to the CON / Remote Unit.
  3. Connect the CPU / Local and the CON / Remote Unit with the network cable.
  4. Now connect the DVI cable to the DVI socket of the PC and the other end to the DVI socket of the CPU / Local Unit (PC-in 1).
  5. Now connect the cable to the DVI socket of the PC and the other end to the DVI socket of the CPU / Local Unit (PC-in 2). Then connect the monitor with the DVI cable to the CON / Remote Unit.
  6. Using a switch: Connect all endpoints to the switch. Ensure that all connections have a bandwith of 1Gbit/sec. For video sharing the network has to support IGMP snooping.

ACCESS TO THE MAIN MENU

Use the monitor and keyboard to access the main menu
Access to the main menu (main menu):

  1. Make sure the extenders, monitors and computers are turned on.
  2. Press the Alt Gr key five times quickly. The main menu and an overview of the an overview of the submenus is displayed.
  3. To enter a submenu, press the corresponding key

kvm-tec-KT-6013L-F-Masterflex-KVM-Extender-over-IP-FIG-
\(2\)

Main Menu

Main menu Short Cuts :

  • S Status Overview Status menu / current status
  • F Features Overview Features settings
  • D DDC Option DDC Option Fixed Setting 1020 x 1080
  • L Local Settings Settings Local
  • R Remote Setting Settings Remote
  • U Update Flash FW Update firmware
  • A About Overview Upgrade overview
  • Q Exit Finish

SYSTEM STATUS

kvm-tec-KT-6021L-SMARTflex-Full-HD Extender-2

Dual
The „Status Menu“ displays the current status of the extender connection. The menu shows the information about the connection, the resolution of the video channel and the USB status. The activated upgrades and the current FW version are displayed in the upper left corner. Link status shows if a connection is possible. Connected shows if the kvm files can currently be transferred.
Video and USB show if files are currently transferred.

FIRMWARE VERSION DISPLAY
Make sure that the main menu is open. Under „A“ – About the currently installed fi rmware version of the remote (CON) and local (CPU) extender is displayed.

FEATURES MENU

Press the F key to enter the Features menu.


Features Menu

  • P Point to Point Mode Enabled/Disabled (Point to Point excludes itself with Matrix mode)
  • M Matrix Switching Mode Disabled/Enabled
  • D Freeze last Image (Disabled)Disabled/Enabled
  • E USB Emulation Mode (Disabled ) Disabled/Enabled
  • S USB Save Feature (mass storage usable) Disabled/Enabled
  • C Diagnosis Diagnostic menu
  • U Unlock Features Activate features
  • I IP Management IP Management

POINT TO POINT
By pressing the “P” key you can switch the Point to Point mode off and on
ATTENTION – if the Point to Point mode is activated, the Switching Mode cannot be activated.

MATRIX SWITCHING MODE

By pressing the „M“ button you can switch the Matrix Switching Mode off and on

  • KVM-TEC Gewerbepark Mitterfeld 1 A 2523 Tattendorf Austria www.kvm-tec.com
  • IHSE GmbH Benzstr.1 88094 Oberteuringen Germany www.ihse.com
  • IHSE USA LLC 1 Corp.Dr.Suite Cranburry NJ 08512 USA www.ihseusa.com
  • IHSE GMBH Asia 158Kallang Way,#07-13A 349245 Singapore www.ihse.com
  • IHSE China Co.,Ltd Room 814 Building 3, Kezhu Road Guangzhou PRC www.ihse.com.cn

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals