kvm-tec V102022 smart Easy Full HD KVM Extender Over IP Instructions

: June 3, 2024
: kvm-tec

Table of Contents

kvm-tec V102022 smart Easy Full HD KVM Extender Over IP
First Aid smartEASY
Delivery Content
CONNECTION
- Quick Installation smartEASY Single local / CPU – remote / CON
ACCESS TO MAIN MENU
DISPLAYING THE FIRMWARE VERSION
FRONTBRIDGING
BACKBRIDGING
KVM-TEC
kvm-tec Support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

kvm-tec V102022 smart Easy Full HD KVM Extender Over IP

First Aid smartEASY

Delivery Content

LOCAL/CPU Unit

1 x SE1 local (CPU)
1 x wall power supplyl 12V 1A (INT or EU-plug)
2 x DVI – DVI cable 1,8m/5.9ft
1 x USB canle 1,8m/5.9ft
4 x rubber feet

REMOTE/CON Unit

1 x SE1 remote (CON)
1 x wall power supplyl 12V 1A (INT orEU-plug)
4 x rubber feet

Öpen OSD menu

The OSD main menu is opened with the standard shortcut: 5 x ALT Gr

( Attention: the fifi rst 20 seconds 5 x Scroll always works, in case the shortcut was forgotten.)

Switching list: CTRL+ALT+PRINT
Changing the shortcuts: in the OSD menu Go to the Remote Settings and then navigate to Keyboard Shortcut.

CONNECTION

Quick Installation smartEASY Single local / CPU – remote / CON

Connect the CON / Remote and the CPU / Local Unit to the included 12V 1A power supply.
Now connect the USB cable to a USB port on your PC and connect the other end of the USB cable to the CPU / Local Unit. Connect keyboard and mouse to the CON / Remote Unit.
Connect the CPU / Local and the CON / Remote Unit with a network cable.
Now connect the DVI cable to the DVI socket of the PC and the other end to the DVI socket of the CPU / Local Unit (PC-in). Then connect the monitor with the DVI cable to the CON / Remote Unit.
If you are using a switch: Connect all endpoints to the switch. Ensure that all connections have a bandwith of 1Gbit/sec. For video sharing the network has to support IGMP snooping (Layer3)

HAVE FUN – your kvm-tec Extender is now in use for many years (MTBF approx 10 years)

Use the monitor and the keyboard to access the main menu

Access to the main menu

make sure the extenders, monitors, and computers are turned on.
Press the Scroll Lock button five times quickly. The main menu and an overview of the submenus are displayed.
To enter a submenu, press the corresponding key.

Main meu Short Cuts

S: Status Overview
U: Update Flash FW
F: Features Overview
D: DDC Option
L: Local Settings
R: Remote Settings
A: About Overview
Key,Esc”

DISPLAYING THE FIRMWARE VERSION

Make sure that the main menu is open. Under „A“ – About the currently installed firmware version of the remote (CON) and local (CPU) extender is displayed.

FEATURES

Press the F key to enter the Features menu. Switching mode is set by default

Menu Status/ current Status

Firmware update
Settings Features
DDC Option Fix
Settings Local
Settings Remote
Exit

FRONTBRIDGING

HARDWARE: 2 SINGLE LOCAL + 1 X DUAL REMOTE

The „Status Menu“ displays the current status of the extender connection. The menu shows information about the connection, the resolution of the video channel and the USB status.
The link status shows if a connection is possible. Connected shows if the kvm files can currently be transferred.
Video and USB show if data is currently being transferred.

BACKBRIDGING

HARDWARE: 1 X DUAL LOCAL + 2 X SINGLE REMOTE

The „Status Menu“ displays the current status of the extender connection. The menu shows the information about the connection, the resolution of the video channel and the USB status.
The link status shows if a connection is possible. Connected shows if the kvm data can currently be transferred.
Video and USB show if data is currently being transferred.