kvm-tec KT-6035 Eco Smart Extender over IP Installation Guide
- June 3, 2024
- kvm-tec
Table of Contents
kvm-tec KT-6035 Eco Smart Extender over IP
The KVM Local Unit for Zero Space in the Rack
KVM Extender- Transmitter over IP in DVI-D, VGA,USB in CATx
ECOsmart
Local Unit in Dongle format
Part.Nr. KT-6035
Check out our Installation Channel:
We are here for you to answer your questions about installation.
Manual download www.kvm-tec.com or kvm-tec
Installation channel on our homepage personally +43 2253 81912
kvm-tec Support
support@kvm-tec.com
Phone: +43 2253 81912 – 30
Quick Installation ECOsmart
(local / CPU)
- Connect the CPU / Local Unit with the included 12V 2A power supply.
- Now connect the USB cable to a USB socket of your PC and connect the other end of the USB cable to the CPU / Local Unit.
- Connect the CPU / Local and the CON remote with a CAT5e/6/7 network cable.
- Now connect the DVI cable to the DVI socket of the PC and the other end to the DVI socket of the CPU Local Unit (PC-in).
Have fun – your kvm-tec Extender is now in use for many years (MTBF approx.10 years)
Optional: connection via VPN possible
USING THE ON SCREEN MENU
Use the monitor and keyboard to use the main menu.
To access the main menu:
-
Make sure the extenders, the monitors and the computer are switched on.
-
Press the ALT+GR key on your keyboard quickly five times.
The main menu appears with an overview of the sub-menus. -
To open a sub-menu press the applicable key.
Main Menu
Main meu Short Cuts :
S Status Overview: Menu Status /current status
U Update Flash FW: Firmware Updates
F Features Overview: Settings Features
D DDC Option: DDC Option Fix settings 1020 x 1080
L Local Settings: Settings Local
R Remote Settings: Settings Remote
A About Overview: Overview Upgrades Upgrades
L Link Redundancy
Q Exit
SYSTEM STATUS
In the status overview menu the current status of the extender connection is
displayed. It provides information on the connection itself as well as
resolution of the video channel, and USBstatus. The enabled options and the
current firmware-version is displayed in the left top corner. Link status
shows whether there is a physical connection available. Connected indicates if
kvm data is currently able to be transmitted.
Video and USB show if datas are currently being transmitted.
VIEWING THE FIRMWARE VERSION
Under „A“ – About the currently installed fi rmware version of the remote (CON) and local (CPU) Extender is displayed (e.g. ‚4267‘)
FEATURES MENÜ
P Point to Point Mode: Enabled/Disabled (Point to Point Point to Point
excludes itself with Matrix mode
M Matrix Switching Mode: Disabled/Enabled
D Freeze last Image: (Disabled)Disabled/Enabled
E USB Emulation Mode: (Disabled ) Disabled/Enabled
S USB Save Feature: (mass storage usable) Disabled/Enabled
O Power Redundance: Alert Alert System
C Diagnosis: Diagnosis menu
U Unlock Features: Unlock Features
I IP Management: IP Management
L Link Redundancy Alert: redundanter Link
POINT TO POINT
You can switch the Point to Point mode on and off by pressing the „P“ key
ATTENTION – if the point to point mode is activated, the switching mode
cannot be activated
MATRIX SWITCHING MODE
By pressing the „M“ button you can switch the Matrix Switching Mode off and on
KVM-TEC
Gewerbepark
Mitterfeld 1 A
2523 Tattendorf
Austria
www.kvm-tec.com
IHSE GmbH
Benzstr.1
88094 Oberteuringen
Germany
www.ihse.com
IHSE USA LLC
1 Corp.Dr.Suite
Cranburry NJ 08512
USA
www.ihseusa.com
IHSE GMBH Asia
158Kallang
Way,#07-13A
349245 Singapore
www.ihse.com
IHSE China Co.,Ltd
Room 814
Building 3, Kezhu Road
Guangzhou PRC
www.ihse.com.cn
References
- KVM Solutions - Technology leader made in Germany – IHSE
- IHSE中国-光纤矩阵KVM切换器-IP KVM集成-电子竞技KVM扩展器解决方案-IHSE思奕科技
- Home - IHSE
- Kvm-tec.com: KVM Extender over IP - Matrix Switching Systeme
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>