kvm-tec KT-8123 MasterEASY Dual in Fiber Instruction Manual
- June 3, 2024
- kvm-tec
Table of Contents
master Easy
KT-8123 MasterEASY Dual in Fiber
masterEASY Dual in Fiber
Art Nr KT -8123
www.kvm-tec.com
Instruction Manual
KT-8123 MasterEASY Dual in Fiber
Check out our Installation Channel:
Lieferumfang
LOCAL/CPU Unit
1 x ME2 local (CPU)
1 x Steckernetzteil 12V 1A (EU-plug)
2 x DVI – DVIKabel 1,8m
1 x USB Kabel 1,8m
2 x VGA-DVi Kabel (opt)
2 x Audio Kable 1,8m(opt)
2 x SFP Modul Multimode bis 500m
4 x GeratefuRe
REMOTE/CON Unit
1 x ME2 remote (CON)
1 x Steckernetzteil 12V 1A (EU-plug)
4 x GeratefORe
2 SFP Module Mulitmedia bis 500m
Quick Installation masterEASY Dual Fiber local / CPU – remote / CON
Open OSD main menu
The OSD main menu is displayed with the default
Standard shortcut opened: 5 x ALT Gr
(Attention: the first 20 seconds work
Always scroll if the shortcut
oned 5 x scroll always if the shortcut was forgotten.)
Switching List : CTRL+ALT+PRINT
Changing the shortcuts in the OSD menu in the OSD menu
Call up the remote settings and then
navigate to Keyboard Shortcut.
- Connect the CON / Remote and the CPU / Local Unit to the supplied 12V 1A power supply.
- Now connect the USB cable to a USB socket on your PC and connect the other end of the USB cable to the CPU/Local Unit. Connect the keyboard and mouse to the CON / Remote Unit.
- Connect the CPU / Local and the CON / Remote with a network cable CAT5e/6/7
- Now connect the DVI cable to the DVI socket on the PC and the other end to the DVI socket on the CPU / local unit (PC in).
- Then connect the monitor to the CON / Remote Unit using the DVI cable.
- Connect the DVI cable to the DVI socket of the PC and the other end to the DVI socket of the CPU / local unit (PC-in 2). Then connect the monitor with the DVI cable to the CON / Remote Unit.
- OPT: Then connect PC Audio/out to Local Audio/in with audio cable. Then connect via the audio cable the remote audio/out
- Almost there! OPT: Now use the audio cable to connect Local Audio/out to PC Audio/in and Remote Audio/out to the audio cable to the microphone
- If using a switch: Connect all endpoints to the switch. Make sure all connections have a bandwidth of 1Gbit/sec. For video sharing you need a switch that supports IGMP snooping. (Layer3)
HAVE FUN – your kvm-tec extender will now be in use for you for many years (MTBF approx. 10 years).
ACCESS TO MAIN MENU
Use the monitor and keyboard to access the main menu Access to the main menu:
-
Make sure the extenders, monitors, and computers are turned on are.
-
Quickly press the Scroll Lock button five times. The main menu (main menu) as well an overview of the submenus is displayed.
If your keyboard doesn’t have a Scroll Lock key, open the On-Screen Keyboard from PC.
Choose: Start >Settings > Ease of Access > Keyboard -
To enter a submenu, press the corresponding button.
Main Menu
Hauptmenü Short Cuts :
| S Status Overview | Status menu / current status |
|---|---|
| U Update Flash FW | Update firmware |
| F Features Overview | Settings of the features |
| D DDC Option | DDC Option Fixed setting |
| L Local Settings | Local settings |
| R Remote Settings | Settings Remote |
| A About Overview | Overview of extenders |
| Taste „Esc“ | End |
DISPLAY THE FIRMWARE VERSION
Make sure the main menu is open. Under “A” – About is the currently installed firmware version of the remote (CON) and local (CPU) extender.
FEATURES
Pressing the F key takes you to the Features menu.
Switching mode is set by default
FRONT BRIDGING
HARDWARE: 2 SINGLE LOCAL + 1 X DUAL REMOTE
The current status of the extender connection is displayed in the “Status
Menu”. The menu shows the information about the connection, the resolution of
the video channel and the USB status.
The link status indicates whether a connection is possible. Connected
indicates whether the kvm files can currently be transferred.
Video and USB indicate whether data is currently being transferred
BACKBRIDGE
HARDWARE: 1 X DUAL LOCAL + 2 X SINGLE REMOTE
The current status of the extender connection is displayed in the “Status
Menu”. The menu shows the information about the connection, the resolution of
the video channel and the USB status.
The link status indicates whether a connection is possible. Connected
indicates whether the kvm data can currently be transferred.
Video and USB indicate whether data is currently being transferred
KVM-TEC
Gewerbepark
Mitterfeld 1 A
2523 Tattendorf
Austria
www.kvm-tec.com| KVM-TEC ASIA
p +9173573 20204
[email protected]
KVM-TEC CHINA
P + 86 1360 122 8145
[email protected]
www.kvm-tec.com| IHSE GmbH
Benzstr.1
88094 Oberteuringen
Germany
www.ihse.com | IHSE USA LLC
1 Corp.Dr.Suite
Cranburry NJ 08512
USA
www.ihseusa.com| IHSE GMBH Asia
158Kallang
Way,#07-13A
349245 Singapore
www.ihse.com| IHSE China Co.,Ltd
Room 814
Building 3, Kezhu Road
Guangzhou PRC
www.ihse.com.cn
---|---|---|---|---|---
kvm-tec Support
[email protected]
Phone: +43 2253 81912 – 30
We are happy to answer your questions
to your installation there?
Manual download www.kvm-tec.com
or
kvm-tec installation channel on our homepage
personal +43 2253 81912
References
- KVM Solutions - Technology leader made in Germany – IHSE
- IHSE中国-光纤矩阵KVM切换器-IP KVM集成-电子竞技KVM扩展器解决方案-IHSE思奕科技
- Home - IHSE
- Kvm-tec.com: KVM Extender over IP - Matrix Switching Systeme