kvm-tec KT-8121 SmartEasy Dual in Copper Instruction Manual

: June 3, 2024
: kvm-tec

Table of Contents

KT-8121 SmartEasy Dual in Copper
Delivery Content
Quick Installation smartEASY Dual local / CPU – remote / CON
ACCESS TO MAIN MENU
FEATURES
FRONTBRIDGING
BACKBRIDGING
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

KT-8121 SmartEasy Dual in Copper
V102022
Instruction Manual

KT-8121 SmartEasy Dual in Copper

Check out our Installation Channel:
http://www.kvm-tec.com/videos/videos-installation-channel
smartEasy
Dual in copper
Art Nr: KT – 8121
www.kvm-tec.com
FULL HD – KVM EXTENDER OVER IP
Tune in the easy KVM World

Full HD over IP

Öpen OSD menu
The OSD main menu is opened with the standard shortcut: 5 x ALT Gr (Attention: the fi rst 20 seconds 5 x Scroll always works, in case the shortcut was forgotten.)
Switching list : CTRL+ALT+PRINT : CTRL+ALT+PRINT Changing the shortcuts in the OSD menu in the OSD menu Go to the Remote Settings and then navigate to Keyboard Shortcut.
kvm-tec KT-8121 SmartEasy Dual in Copper - Figure 2

Delivery Content

LOCAL/CPU Unit

1 x SE2 local (CPU)
1 x wall power supply 12V 1A INT or (EU-plug)
2 x DVI – DVI cable 1,8m/5,9ft
1 x USB cable 1,8m/5,9 ft
4 x rubber feets

REMOTE/CON Unit

1 x SE2 remote (CON)
1 x wall power supply 12V 1A (EU-plug)
4 x rubber feets

Quick Installation smartEASY Dual local / CPU – remote / CON

Connect the CON / Remote and the CPU / Local Unit to the included 12V 1A power supply.
Now connect the USB cable to a USB port on your PC and connect the other end of the USB cable to the CPU / Local Unit. Connect keyboard and mouse to the CON / Remote Unit.
Connect the CPU / Local and the CON / Remote Unit with the network cable.
Now connect the DVI cable to the DVI socket of the PC and the other end to the DVI socket of the CPU / Local Unit (PC-in 1).
Now connect the cable to the DVI socket of the PC and the other end to the DVI socket of the CPU / Local Unit (PC-in 2). Then connect the monitor with the DVI cable to the CON / Remote Unit.
If you are using a switch: Connect all endpoints to the switch. Ensure that all connections have a bandwith of 1Gbit/sec. For video sharing the network has to support IGMP snooping. (Layer 3)
HAVE FUN – your kvm-tec Extender is now in use for many years (MTBF approx 10 years)

Use the monitor and the keyboard to access the main menu
Access to the main menu.

make sure the extenders, monitors, and computers are turned on.
Press the Scroll Lock button five times quickly. The main menu and an overview of the submenus are displayed.
To enter a submenu, press the corresponding key.

kvm-tec KT-8121 SmartEasy Dual in Copper - Figure 3

Main meu Short Cuts :

S Status Overview	Menu Status / current Status
U Update Flash FW	Firmware update
F Features Overview	Settings Features
D DDC Option	DDC Option Fix
L Local Settings	Settings Local
R Remote Settings	Settings Remote
A About Overview	Exit

Key „Esc“
DISPLAYING THE FIRMWARE VERSION
Make sure that the main menu is open. Under „A“ – About the currently installed firmware version of the remote (CON) and local (CPU) extender is displayed

FEATURES

Press the F key to enter the Features menu.
Switching mode is set by default
kvm-tec KT-8121 SmartEasy Dual in Copper - Figure 4

FRONTBRIDGING

HARDWARE: 2 SINGLE LOCAL + 1 X DUAL REMOTE
The „Status Menu“ displays the current status of the extender connection. The menu shows the information about the connection, the resolution of the video channel and the USB status.
The link status shows if a connection is possible. Connected shows if the kvm fi les can currently be transferred.
Video and USB show if data is currently being transferred
kvm-tec KT-8121 SmartEasy Dual in Copper - Figure 5

BACKBRIDGING

HARDWARE: 1 X DUAL LOCAL + 2 X SINGLE REMOTE
The „Status Menu“ displays the current status of the extender connection. The menu shows the information about the connection, the resolution of the video channel and the USB status. The link status shows if a connection is possible. Connected shows if the kvm fi les can currently be transferred.
Video and USB show if data is currently being transferred
kvm-tec KT-8121 SmartEasy Dual in Copper - Figure 6

KVM-TEC| KVM-TEC ASIA| IHSE GmbH| IHSE USA LLC| IHSE GMBH Asia| IHSE China Co.,Ltd
---|---|---|---|---|---
Gewerbepark
Mitterfeld 1 A
2523 Tattendorf
Austria
www.kvm-tec.com| p +9173573 20204
sales.apac@kvm-tec.com
KVM-TEC CHINA
– P + 86 1360 122 8145
chinasales@kvm-tec.com
www.kvm-tec.com| Benzstr.1
88094 Oberteuringen
Germany
www.ihse.com| 1 Corp.Dr.Suite
Cranburry NJ 08512
USA
www.ihseusa.com| 158Kallang
Way,#07-13A
349245 Singapore
www.ihse.com| Room 814
Building 3, Kezhu Road
Guangzhou PRC
www.ihse.com.cn

kvm-tec First Aid smartEASY kvm-tec KT-8121 SmartEasy Dual in
Copper - Figure 1

kvm-tec Support
support@kvm-tec.com
Phone: +43 2253 81912 – 30
We are here for you to answer
your questions about installation?
Manual download www.kvm-tec.com
or
kvm-tec Installationchannel on our homepage
personally +43 2253 81912
Misprints, errors and technical changes reserved