kogan KADA312WRSA Ultra Slim Dolby Atmos Soundbar User Guide
- September 28, 2024
- Kogan
Table of Contents
KADA312WRSA Ultra Slim Dolby Atmos Soundbar
“`html
Specifications
-
Product Name: Ultra Slim Dolby Atmos Soundbar with Wireless
Subwoofer -
Model Number: KADA312WRSA
-
Components:
- Soundbar
- Wireless Subwoofer
- Wall mounting kit
- HDMI cable
- AC Adapter (for Soundbar)
- AC Power Cord (for Subwoofer)
- AAA Batteries (x2)
- Remote Control
Product Usage Instructions
Safety & Warnings
Caution: To reduce the risk of electric shock, do not remove
cover (or back). No user-serviceable parts inside. Refer servicing
to qualified service personnel.
Warning Symbols: The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to alert the user to
the presence of uninsulated ‘dangerous voltage’ within the
product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock. The exclamation point within
an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
Components
The Ultra Slim Dolby Atmos Soundbar with Wireless Subwoofer
includes various components such as the soundbar, wireless
subwoofer, wall mounting kit, HDMI cable, AC adapter, AC power
cord, AAA batteries, and a remote control.
Installation
Option A: Tabletop Placement
Place the soundbar on a tabletop directly below the TV
screen.
Option B: Wall Mounting
Warning: To prevent injury, securely attach the
soundbar to the floor/wall following the user guide. Suggested wall
mounting height: 1.5 meters.
Note: If you are unfamiliar with power tools or electrical
wiring layout, consult a professional installer.
-
Insert wall anchors into each hole in the wall if
necessary. -
Tighten the wall mount brackets on the wall with screws and a
screwdriver. -
Remove the screws at the back of the soundbar and install the
wall mounting screws. -
Lift the soundbar onto the wall mount brackets and slot it into
place.
Operation
Remote Control
Replacing Remote Control Batteries:
-
Open the battery compartment cover on the remote control.
-
Replace old batteries with new ones ensuring correct
polarity. -
Close the battery compartment cover.
Pairing the Subwoofer:
The subwoofer and soundbar will automatically pair when both
units are plugged in and turned on without requiring a cable
connection.
- Insert the AC Adapter into the power input port (DC IN) of the
soundbar and switch it on for automatic pairing.
Frequently Asked Questions (FAQ)
Q: How do I adjust the bass level on the soundbar?
A: To adjust the bass level on the soundbar, use the remote
control and locate the button labeled “Adjust bass level.”
Q: Can I mount the soundbar on a wall without professional
help?
A: While it is possible to mount the soundbar on a wall
following the user guide instructions, if you are unfamiliar with
power tools or electrical wiring, it is recommended to consult a
professional installer for assistance.
“`
ULTRA SLIM DOLBY ATMOS SOUNDBAR
WITH WIRELESS SUBWOOFER
KADA312WRSA
SAFETY & WARNINGS
Caution: To reduce the risk of electric shock, do not remove cover (or back).
No userserviceable parts inside. Refer servicing to qualified service
personnel
Warning Symbols: The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the presence of
uninsulated `dangerous voltage’ within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock. The exclamation
point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in
the literature accompanying the appliance
· Read and follow all safety and operating instructions before using the
product. Retain this user guide for future reference.
· Adhere to all warnings provided with the product and in the operating
instructions. · Follow all usage and operational instructions. · Do not use
this product near water or moisture. · Clean only with a dry cloth. · Do not
block any ventilation openings. Install according to the instructions listed
in this
user guide. · Keep away from heat sources such as radiators, stoves, and
amplifiers. · Do not bypass the safety features of polarized or grounding-type
plugs. · Protect the power cord from being walked on or pinched. · Only use
attachments and accessories specified by Kogan.com. · Unplug the product
during lightning storms or when unused for long periods. · Refer all servicing
to qualified personnel. · Do not expose the product to dripping or splashing;
do not place objects filled with
liquids, such as vases, on the product. · Maintain a minimum distance of 5cm
around the product for sufficient ventilation. · Do not place naked flame
sources, such as lit candles, on the product.
Caution
· Use of this product in any other way other than those specified in this user
guide may result in hazardous radiation exposure or unsafe operation.
· To reduce the risk of fire or electric shock, do not expose this product to
rain or moisture. · Danger of explosion if the battery is incorrectly
replaced. Replace only with the same or
equivalent type. · The power plug is used as a means of disconnecting the
product from power and must
remain readily accessible.
Warning:
· The battery shall not be exposed to excessive heat such as direct sunlight,
fire, or the sources of heat.
· Before operating, check the voltage to ensure it matches your local power
supply. · Do not place the unit close to strong magnetic fields or on an
amplifier or receiver. · If any object or liquid falls into the system, unplug
and contact help.Kogan.com for
support. · Use a clean, dry or slightly damp cloth for cleaning. · Pull
directly on the plug, never on the cord, when removing the power plug from the
wall outlet.
Battery Precautions
· Be sure to insert the batteries with correct positive (+) and negative ()
polarities. · Use batteries of the same type. Never use different types of
batteries together. · Either rechargeable or non-rechargeable batteries can be
used. Refer to the
precautions on their labels. · Do not drop the remote control. · Do not allow
anything to impact the remote control. · Do not spill water or any liquid on
the remote control. · Do not place the remote control in direct sunlight or
near sources of excessive heat. · Remove the battery from the remote control
when not in use for a long period of time,
as corrosion or battery leakage may occur and result in physical injury and/or
property damage and/or fire. · Do not use any batteries other than those
specified. · Do not mix new batteries with old ones. · Never recharge a
battery unless it is confirmed to be a rechargeable type.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Kogan.com is under license.
Other trademarks and trade names are those of their respective owners.
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress
and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing
Administrator, Inc.
Dolby, Dolby Atmos and the double-D symbol are registered trademarks of Dolby
Laboratories Licensing Corporation. Manufactured under license from Dolby
Laboratories. Confidential unpublished works. Copyright © 2012-2024 Dolby
Laboratories. All rights reserved.
COMPONENTS
Soundbar
Wireless Subwoofer
Wall mounting kit
HDMI cable
AC Adapter (for Soundbar)
AC Power Cord (for Subwoofer)
AAA Batteries (x2)
Remote Control
Note: Images, illustrations and drawings shown on this User Guide are for reference only, actual product may vary in appearance.
O. VERVIEW
Soundbar
2 1
3 4
1 Indicator / Remote Control Sensor · LED: Mode · Red: Standby · White: HDMI
eARC/ARC · Blue: BT (Bluetooth)
2 Wall bracket screws 3 HDMI eARC/ARC Socket 4 Power input port
Wireless Subwoofer
1
2 3
1
Power input port
2
Pair button
3
Pair Indicator
Remote Control
1
Switch the soundbar between ON and Standby mode.
· Enables Bluetooth mode.
1
2
· Activate the pairing function in
Bluetooth mode or disconnect
2
6
the existing paired Bluetooth
device.
3
7
3
Increase/decrease the volume.
8
4
Adjust bass level.
4
MOVIE
5
MUSIC
Select Equaliser (EQ) Effect.
5
NEWS
6
Selects HDMI eARC/ARC mode.
7
Skip to previous /next track
8
Play/pause/resume playback.
9
Mute or resume the sound.
INSTALLATION
Option A: Tabletop placement
· If your TV is placed on a table, you can place the soundbar on the table directly in front of the TV stand, centered with the TV screen.
· If your TV is attached to a wall, you can mount the
soundbar on the wall directly below the TV screen.
A
Option B: Wall Mounting
· If you intend to install this product yourself, you must check for
electrical wiring and plumbing that may be buried inside the wall. It is the
installer’s responsibility to verify that the wall will safely support the
total load of the soundbar and wall brackets.
B
Notes: · If you aren’t confident with the installation, consult a licenced
trade professional. · Additional tools (not included) are required for the
installation. · Do not overtighten screws. · Use an electronic stud finder to
check the wall type before drilling
WARNING: To prevent injury, the soundbar must be securely attached to the
floor/wall in accordance with this user guide. Suggested wall mounting height:
1.5 meters.
Note:
If you are unfamiliar with power tools or the layout of electrical wiring in
the walls of your home, consult a professional installer.
1. Drill 2 parallel holes (Ø4mm/0.16″ each, according to your wall type) in
the wall. The distance between the holes should be 1053 mm.
2. Insert wall anchors into each hole in the wall if necessary. Tighten the
wall mount brackets on the wall with screws and a screwdriver (not included).
Ensure they are securely installed.
3. Remove the screws at the back of the soundbar. Install the wall mounting
screws into the back of the soundbar.
4. Lift the soundbar onto the wall mount brackets and slot it into place.
~50 mm / 2.0″ 1053 mm (41.4″)
1053mm
OPERATION
Remote Control
The provided remote control allows the soundbar to be operated from a
distance. · Even if the remote control is operated within the effective range
of 6m, remote control operation may be impossible if there are any obstacles
between the soundbar and the remote control. · If the remote control is
operated near other products that generate infrared rays or if other remote
control devices using infrared rays are used near the soundbar, it may operate
incorrectly. Conversely, the other products may also operate incorrectly.
Replacing the Remote Control Batteries
1. Press and slide the back cover to open the battery compartment of the
remote control. 2. Insert x2 AAA size batteries (included). Make sure the
polarity symbols (+ and ) on the
batteries match those in the battery compartment. 3. Close the battery
compartment cover.
1
2
3
Pairing the Subwoofer
The subwoofer and soundbar will automatically pair when both units are plugged
into an electrical outlet and turned on. No cable is required for connecting
the two units together.
1. Soundbar: Insert the AC Adapter into the power input port (DC IN) and
switch on the soundbar. The soundbar will start searching for the subwoofer
signal automatically.
2. Subwoofer: Insert the AC power cable into the power input port (AC-IN) and
switch on. The subwoofer will automatically connect to the soundbar.
3. The subwoofer indicator will be solid once it’s connected successfully.
4. The soundbar and subwoofer will automatically connect next time they are
powered on.
Indicator Rapidly flashing Solid Slowly flashing
Status Subwoofer in pairing mode Connected / Pairing successful Pairing Failed
Notes:
· Do not press the PAIR button on the rear of the subwoofer, unless manually
pairing.
· If the automatic pairing fails, press and hold the PAIR button on the
subwoofer then press and hold the (MUTE) button on the remote control to
manually pair.
Dolby Atmos · Dolby Atmos gives you immersive listening experience by
delivering sound in threedimensional space and all the richness, clarity and
power of Dolby sound. · For more information, please visit
dolby.com/technologies/Dolby Atmos
Using Dolby Atmos Dolby Atmos is available only in HDMI mode. For the details
of the connection, please refer to “HDMI Connection”. 1. To use Dolby Atmos®
in HDMI mode, your TV must support Dolby Atmos. 2. Ensure that “No Encoding”
is selected for bitstream in the audio output of the
connected external device (e.g., Blu-ray DVD player, TV, etc.). 3. When
entering Dolby Atmos / Dolby Digital / PCM format, the soundbar will display
DOLBY ATMOS / DOLBY AUDIO / PCM AUDIO.
HDMI eARC/ARC · The ARC (Audio Return Channel) function allows you to send
audio from your ARCcompliant TV to your soundbar through a single HDMI
connection. To enjoy the ARC function, ensure your TV is both HDMI-CEC and ARC
compliant and set up accordingly. When correctly set up, you can use your TV
remote control to adjust the volume output (VOL +/- and MUTE) of the soundbar.
· Connect the HDMI cable (included) from the soundbar HDMI OUT (TV eARC/ARC)
port to the HDMI ARC port on your ARC-compliant TV. Then use the remote
control to select HDMI (TV eARC/ARC).
HDMI Cable
Bluetooth® Operation Pairing the soundbar with a Bluetooth® device to listen
to music:
First time pairing
1. Press the button on the remote control to select Bluetooth® mode. The Blue
indicator will flash slowly.
2. On the Bluetooth device, switch on Bluetooth, search for and select `Kogan
KADA312WRSA’ to start pairing.
3. Wait until you hear the voice prompt from the soundbar. 4. Select and play
audio files or music on your Bluetooth device.
Pairing a new device after first time pairing press and hold the button on the
remote control to disconnect from current Bluetooth connected devices and
enter the Bluetooth pairing mode. Follow step 2-3 to pair your Bluetooth®
device. Note: Compatibility with all Bluetooth® devices is not guaranteed.
CLEANING & CARE
1. Do not subject the unit to excessive force, shock, dust or extreme
temperature. 2. Do not tamper with the internal components of the unit. 3.
Clean the unit with a damp (never wet) cloth except metal contact or speaker
grille.
Solvent or detergent should never be used. 4. Avoid leaving your unit in
direct sunlight, humid or dusty or extreme cold/hot places.
Keep your unit away from heating appliances and sources of electrical noise.
5. Do not install or place this unit in a bookcase, built-in cabinet or closed
space. Ensure
the unit is well ventilated. 6. Un-plug the unit from the mains socket after
used or lightning storm or while cleaning. 7. Do not open any covers as this
may expose dangerous voltages. Caution: Never allow any water or other liquids
to get inside the unit while cleaning.
Battery Disposal
· The batteries used on remote control contain chemicals that are harmful to
the environment.
· To preserve the environment, dispose of used batteries according to your
local laws or regulations. Do not dispose of batteries with normal household
waste.
· For more information, please contact the local authority or your retailer
where you purchased the product.
SPECIFICATIONS
Soundbar Adapter Mode Input
Output
Power Consumption
Dimensions Net weight Frequency Response Bluetooth version / profiles
Bluetooth frequency range Bluetooth Max. transmitting power 2.4G Wireless
frequency range 2.4G Max. transmitting power Modulation Type
Power Supply
Power Consumption Subwoofer Dimension
Net weight Frequency Response Amplifier (RMS Output power)
Total
Soundbar Subwoofer Remote Control Distance/Angle Battery type
KA4801A-2402000EU
100-240V~ 50/60Hz, 1.2A (Max)
24V=2.0A
48 W
(Use only the power supplies supplied)
40W < 0.5W (Stand By)
1100×40×34.5mm
1.2kg
120Hz – 20KHz
V 5.3 (A2DP, AVRCP)
2400 MHz ~ 2483.5 MHz
5dBm
2400 MHz ~ 2483 MHz
6dBm
GFSK, /4 DQPSK
100-240V~ 50/60Hz
40W < 0.5 W (Stand By)
250 × 255 × 253mm
3.4kg
40Hz – 120Hz
420W Maximum/Peak/Reference/Music Power (approx.) 210W (RMS Power @ 10% THD
(W)
30W x3
120W
19.7 feet (6m) / 30° AAA (1.5V x 2)
Design and specifications are subject to change without notice.
TROUBLESHOOTING
If you encounter problems when using this soundbar, check the following points before requesting service. For further support, contact help.Kogan.com. Avoid attempting to repair the system yourself to prevent any potential issues.
Problem Product wont power on
No sound
Solution
· Ensure that the power cords of the both products are properly connected.
· Ensure that there is power at the electrical outlet.
· Press the power button to turn the sound bar on.
· Make sure that the soundbar is not muted. Press MUTE or volume +/- button to
resume normal listening.
· Press button to switch the soundbar to standby mode. Then press the button
again to switch the soundbar on.
· Unplug both the soundbar and the subwoofer from the mains socket, then plug
them again. Switch on the soundbar.
· Ensure the audio setting of the input source (e.g. TV, game console, DVD
player, etc.) is set to PCM or Dolby Digital mode while using digital (e.g.
HDMI) connection.
· The subwoofer is out of range, please move the subwoofer closer to the
soundbar. Make sure the subwoofer is within 5 m of the soundbar (the closer
the better).
· The soundbar may have lost connection with the subwoofer. Re-pair the units
by following the steps on the section “Pair up with the Subwoofer”.
· The soundbar may not be able to decode all digital audio formats from the
input source. In this case, the soundbar will mute. This is NOT a defect.
device is not muted.
Remote control does not work
TV has display problem while viewing HDR content from HDMI source.
The sound bar is not discoverable on my Bluetooth device for Bluetooth pairing
The product suddenly powered off.
Dolby Atmos® effects not working.
· Before you press any playback control button, first select the correct
source.
· Reduce the distance between the remote control and the sound bar.
· Insert the battery with its polarities (+/-) aligned as indicated.
· Replace the batteries.
· Aim the remote control directly at the sensor on the front of the sound bar.
Some 4K HDR TVs require the HDMI input or picture settings to be set for HDR
content reception. For further setup details on HDR display, refer to the
instruction manual of your TV.
· Ensure that Bluetooth is enabled on your Bluetooth device.
· Ensure you have paired the sound bar with your Bluetooth device.
· The sound bar has a Bluetooth function that can receive a signal within 8
metres. Keep a distance within 8 metres between the sound bar and your
Bluetooth device.
When the unit’s external input signal level is too low, the sound bar will
turn off automatically after 15 minutes. Increase the volume level of your
external device.
For non-HDMI connections (such as use of Bluetooth), limited height Surround
effects are generated. See the section of `Dolby Atmos®’ about how to achieve
best Dolby Atmos® effects.
Disposal
This marking indicates that this appliance should not be disposed with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.
NOTES
Need more information?
We hope that this user guide has given you the assistance needed for a simple
set-up.
For the most up-to-date guide for your product, as well as any additional
assistance you may require,
head online to help.kogan.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>