GEN2WAVE RS01 Rugged Mobile Computer User Manual

: July 3, 2024
: GEN2WAVE

Table of Contents

GEN2WAVE RS01 Rugged Mobile Computer
Product Usage Instructions
7 floor, Point town B/D, 187-4, Gumi-dong, Bundang-gu, Seongnam-si, Gyeonggi-
Specification
FAQ
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

GEN2WAVE RS01 Rugged Mobile Computer

Specifications

Part	Details
Physical Characteristics	Dimensions: 500 1.6ft, Weight: 0.5m tumbles, IP68,

MIL STD 810H
(Vibration)
Performance Characteristics| CPU, Memory, Operating System, Operating Temperature, Storage
Temperature, Humidity, Drop Tumble, Sealing, Vibration
User Environment| Thermal Shock, Electrostatic Discharge (ESD), Sensor, Barcode
Scanning, Camera, NFC, Radio Frequency Bands

Product Usage Instructions

Device Features

Barcode scanner
3.5mm Audio Jack
LED Indicator
Proximity / Light Sensor
Volume Buttons
Function Buttons
USIM / MicroSD Slot
SOS Button
Receiver MICs
Front and Rear Cameras with Flash
Power Button
LCD / Touch Screen
Speaker and Microphones
Pogo Pin
USB C-Type Port
Screw Hole for Hand Strap

Card Installation
How to Insert SIM cards and a MicroSD card:

Pull out the cover of the USIM(nano) and MicroSD slots.
Insert the USIM card and Micro SD card into the slot.

FCC Part 15 Information and Notices
This device complies with part 15 of the FCC Rules. Operation is subject to conditions:

This device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

Please pay attention that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

7 floor, Point town B/D, 187-4, Gumi-dong, Bundang-gu, Seongnam-si, Gyeonggi-

do, 463-870, Rep. of KoreaTel. +82-31-607-7537 Fax. +82-31-608-7537 Homepage : www.gen2wave.com Email : [email protected]

Specification

Part| Item| Details| Part| Item| Details|
---|---|---|---|---|---|---
Physical Characteristics| Dimensions| 6.61(L) x 3.03(W) x 0.69(H) in.

168(L) x 77(W) x 17.4(H) mm

| User Environment| Thermal Shock| MIL STD 810H

(-40°F to 158°F/-40°C to 70°C rapid transition)

|
Weight| 10.57oz / 300g| Electrostatic Discharge (ESD)| +/- 15kv air discharge, +/- 8kv direct discharge,

+/- 8kv indirect discharge

Rear Camera: 50MP Auto Focus with LED Flash

5G-NR: N2 / N5 / N12 / N25 / N30 / N38 / N41 / N48 / N66 / N71 / N77 / N78

LTE-FDD: B2 / B4 / B5 / B7 / B12 / B13 / B14 / B17 / B25 / B29 / B30 / B46 / B66 / B71

LTE-TDD: B38 / B41 / B42 / B43 / B48 WCDMA: B2 / B4 / B5

GSM: B2 / B3 / B5 / B8

|
Voice and Audio| Dual speakers for loud and clear sound USB-C audio headset support

3.5 mm audio jack, 3 MIC

|
Buttons| Left: Volume up, Volume down, PTT Right: Power, F1, F2 / TOP: SOS|
Interface Ports| USB 3.0 (Bottom Type C): Host and Client Pogo 2pins for charging

Pogo 2pins for Trigger Handle

44,48,52,56,60,64,100,104,108,112,116,120,124,

128, 132,136,140,144,149,153,157,161,165;

Channel 1-233 (5925-7125 MHz);

Channel Bandwidth: 20/40/80/160 MHz

— EAP-TTLS (PAP, MSCHAP, MSCHAPv2); EAP-TLS, PEAPv0-MSCHAPv2, PEAPv1-EAP-GTC, LEAP, EAP- PWD)

Package

NOTE
Items in the box may be changed according to the purchase order.

Device Features

Card Installation

How to Insert SIM cards and a MicroSD card
- Pull out the cover of the USIM(nano) and MicroSD slots.
- Insert the USIM card and Micro SD card into the slot.
- Slide the slot into the device.
USIM and MicroSD cards can be removed in the reverse order.

Caution
If the device is powered on and the SIM card is inserted, the device must be rebooted.

Charging the Device

Charging

The device battery can be charged by plugging in a power cable to a USB C port.
When charging, the charging status LED of the device lights up, red when charging, and green when charging is complete.
Battery LED indicates as follows :
- OFF: Not Charging
- Red LED: Charging
- Green LED: Fully Charged

Note
Devices support high-speed charging. The adapter voltage must be 5~9V and the current is 2A or higher recommended.

Caution
Charging speed is slow when using a PC’s USB port or adapter with less than 2A current.

How to use functions

Barcode Scanner
The laser aimer should be on the center of the barcode to get a successful read

NFC Reader
Since the NFC antenna is integrated into the rear side of the device, the contactless card is shown NFC reading distance depending on the NFC card type

How to use power
Power On

Press the power button for 1 second to turn on the device.
The power LED briefly turns green on the screen, then turns off, and the GEN2WAVE logo appears

Power Off

Press the power button until the system menu appears and touch the Power off icon.

Soft Reset

Press the power button until the system menu appears and touch the Restart icon.

Hard Reset

Press and hold the power button for approximately 10 seconds to reboot the device.

Factory Reset

Follow the below steps to Factory Rese
Path:Settings → System → Resetoptions → Erase all data (factory reset) → Erase all data

Caution
Factory Reset: Erase all data and restore default settings.

SAR.
This device has been tested and meets the FCC RF exposure limit. FCC SAR has been tested with 0mm distance for head SAR, 15mm for Body SAR, 10mm for Hotspot SAR, and 0mm for Extremity SAR. SAR