tp-link Archer T6E AC1300 Wireless Dual Band PCI Express User Guide

June 6, 2024
tp-link

tp-link logo

User Guide
AC1300 Wireless Dual Band PCI Express Adapter
Archer T6E

©2020 TP-Link REV2.0.1 1910012788

About This Guide

This guide is a complement to the Quick Installation Guide. The Quick Installation Guide instructs you on quick installation, and this guide provides the product overview and detailed instructions for each step.
When using this guide, please notice that the features of the adapter may vary slightly depending on the model and software version you have. All screenshots, images, parameters, and descriptions documented in this guide are used for demonstration only.

Conventions

In this guide, the following conventions are used:

Convention|

Description

---|---
Teal Italic| Hyperlinks are in teal italic. You can click to redirect to a website or a specific section.
  Teal| Contents to be emphasized and texts on the web page are in teal, including the menus, items, buttons, etc.
Note:| Ignoring this type of note might result in a malfunction or damage to the device.
Tips:| Indicates important information that helps you make better use of your device.

More Info

Chapter 1

 Get to Know About Your Adapter

This chapter introduces what the adapter can do and shows its appearance.
This chapter contains the following sections:

  • Product Overview
  • LED Status

1 1 Product Overview

The TP-Link Wireless PCI Express Adapter connects your desktop computer to a Wi-Fi network for lag-free video streaming, online gaming, secure internet surfing and
internet calls.

  •  Compatible with 802.11a/b/g/n products
  •  Supports ad-hoc and infrastructure mode
  •  The maximum speed of up to 867Mbps for a 5GHz network and 400Mbps for a 2.4GHz network
  • Supports WEP, WPA/WPA2, WPA-PSK/WPA2-PSK

1 2 LED Status

tp-link Archer T6E AC1300 Wireless Dual Band PCI Express --
LED

You can check the adapter’s working status by following the LED Explanation table.

Status Indication
On The adapter has been installed.
Flashing The adapter is transmitting or receiving data.

Tips:
If the LED is off, try these troubleshooting tips:

  1. Remove and reinstall the adapter.
  2. Refer to Troubleshooting-T2 to check if the adapter is recognized and enabled. Reinstall the adapter software, if necessary.

Connect to a Computer

This chapter introduces how to install the adapter into your computer.

Follow the steps below to insert the adapter into your computer:

  1. Turn off the computer, unplug the power cable and remove the case panel.
    tp-link Archer T6E AC1300 Wireless Dual Band PCI Express --
panel

  2. Locate an available PCI-E slot and carefully insert the adapter.
    tp-link Archer T6E AC1300 Wireless Dual Band PCI Express --
carefully

  3.  Connect the antennas to the adapter.
    tp-link Archer T6E AC1300 Wireless Dual Band PCI Express --
adapter

  4.  Replace the case panel, plug in the power cable, and turn on your computer.
    Note:
    If the bracket is not suitable for your computer, detach it from the adapter’s board and replace it with the low-profile bracket provided.

tp-link Archer T6E AC1300 Wireless Dual Band PCI Express --
computer

Use Your Adapter

This chapter introduces how to install your adapter’s driver, use your adapter to join a wireless network, and uninstall the driver in a Windows system. The adapter is equipped with a setup wizard, which can guide you through the installation process.
This chapter includes the following sections:

  • Install Driver
  • Join a Wireless Network
  • Uninstall Driver

3. 1. Install Driver
Follow the steps below to set up your adapter:

  1. Insert the Resource CD into your CD drive and run the Autorun.exe.
    Note:
    You can also download the driver from the product’s Support page at www tp- link com.

  2. Select Archer T6E and follow the instructions to continue the installation.
    Note:
    If you can’t install the driver successfully, disable the antivirus software and firewall, then try again.
    tp-link Archer T6E AC1300 Wireless Dual Band PCI Express --
installation

  3. When the following screen appears, the driver has been installed successfully.

tp-link Archer T6E AC1300 Wireless Dual Band PCI Express --
successfully

3 2 Join a Wireless Network
You can join a wireless network via Windows Wireless Utility.
Follow the instructions below to use your computer system’s built-in wireless utility:

  1. Click , or (Network icon) on the taskbar. Select the Wi-Fi network you want to join, and click Connect. Enter the network password when prompted.
  2. When the network icon changes to or , it indicates a successful network connection.

tp-link Archer T6E AC1300 Wireless Dual Band PCI Express --
connection

3 3 Uninstall Driver
The software uninstallation steps vary a bit in different systems, please follow the appropriate instructions for your Windows operating system: Windows 8/8.1/10, Windows XP/7.

  • Windows 8/8 1/10
    Go to Start > Apps, find the TP-Link application. Click Uninstall TP- Link Archer T6E , then follow the on-screen instructions to complete the uninstallation.

  • Windows XP/7
    Go to Start > All Programs > TP-Link > Uninstall TP-Link Archer T6E. Follow the on-screen instructions to complete the uninstallation.

Appendix: Troubleshooting

T1. What should I do if the adapter is not detected?

  • Make sure the adapter is securely located in the appropriate PCI-E slot.
  • Make sure you meet the minimum system requirements for the adapter and that the latest Windows and system updates are installed on your computer.
  • Make sure you use the latest driver for your specific adapter. The latest drivers can be found at the product’s Support page at http://www.tp-link.com.
  • Try a different PCI-E slot on the computer.
  • Try restarting the computer or try the adapter on a different computer.

T2. How to check if I have installed the driver for my adapter successfully or not?

  1. On your computer, please right-click the Computer icon and go to Manage;
    tp-link Archer T6E AC1300 Wireless Dual Band PCI Express --
Manage

  2. Open the Device Manager and go to Network adapters, and then find the corresponding TP-Link adapter, right-click it and then go to Properties;
    tp-link Archer T6E AC1300 Wireless Dual Band PCI Express --
Properties

  3. If you can see “This device is working properly.” in the red box, you have already installed the driver successfully.

tp-link Archer T6E AC1300 Wireless Dual Band PCI Express --
properly

T3. What should I do if can’t connect to the Wi-Fi after installing the driver?

  • Refer to T2 to check if you have installed the driver for your adapter successfully.
  • Disable the antivirus software and firewall, then try again.
  • Make sure the adapter is securely located in the appropriate PCI-E slot.
  • Try a different PCI-E slot on the computer.
  • Restart your computer and try again.
  • Re-install the driver and try again.

FCC compliance information statement

Product Name: AC1300 Wireless Dual Band PCI Express Adapter
Model Number: Archer T6E
Responsible party:
TP-Link USA Corporation, d/b/a TP-Link North America, Inc.
Address: 145 South State College Blvd. Suite 400, Brea, CA 92821
Website: http://www.tp-link.com/us/
Tel: +1 626 333 0234
Fax: +1 909 527 6803
E-mail: sales.usa@tp-link.com
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference.
  2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications
could void the user’s authority to operate the equipment.
FCC RF Radiation Exposure Statement:
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.
“To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.”
We, TP-Link USA Corporation, have determined that the equipment shown above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.

CE Mark Warning

This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
OPERATING FREQUENCY(the maximum transmitted power)
2400 MHz -2483.5 MHz(20dBm)
5150 MHz -5250 MHz(23dBm)
5250 MHz -5350 MHz (23dBm)
5470 MHz -5725 MHz (23dBm)
EU declaration of conformity
TP-Link hereby declares that the device is in compliance with the essential
requirements and other relevant provisions of directives 2014/53/EU, 2011/65/EU, and (EU)2015/863.
The original EU declaration of conformity may be found at https://www.tp- link.com/en/ce
RF Exposure Information
This device meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way of health protection.
The device complies with RF specifications when the device is used at 20 cm from your body.

National restrictions
Attention: This device may only be used indoors in all EU member states and EFTA countries.

| AT| BE| BG| CH| CY| CZ| DE| DK
---|---|---|---|---|---|---|---|---
EE| EL| ES| Fl| FR| HR| HU| IE
IS| IT| LI| LT| LU| LV| MT| NL
NO| PL| PT| RO| SE| SI| SK| UK

Canadian Compliance Statement
This device contains license-exempt transmitter(s)/receiver(s) that comply with  Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

  1. This device may not cause interference.
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

Industry Canada Statement
CAN ICES-3 (B)/NMB-3(B)

Safety Information

  • Keep the device away from water, fire, humidity or hot environments.
  • Do not attempt to disassemble, repair, or modify the device.
  • Do not use the device where wireless devices are not allowed.

Please read and follow the above safety information when operating the device.
We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.
Explanation of the symbols on the product label

Symbol

|

Explanation

---|---
| RECYCLING
This product bears the selective sorting symbol for waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment.
User has the choice to give his product to a competent recycling organization or to the retailer when he buys new electrical or electronic equipment.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals