HFCL HSP-IO-8GE2S-C2PA 8 Port L2 Managed Switch User Guide
- June 17, 2024
- HFCL
Table of Contents
- HFCL HSP-IO-8GE2S-C2PA 8 Port L2 Managed Switch
- Product Usage Instructions
- Applicable on
- Introduction
- Bracket Assembly
- Product specification
- Login access
- Port LED status
- System LED status
- Safety Precautions
- Contact Us:
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
HFCL HSP-IO-8GE2S-C2PA 8 Port L2 Managed Switch
Product Specifications
- Capacity: Switching: 24 Gbps, Forwarding: 17.86 mpps
- Port Configuration: 8×10/100/1000 Base-T Gigabit Access Ports with PoE+ and Non-PoE support
- Uplink Ports: 2×10/100/1000 Base-T, 2x1G SFP Gigabit Uplink Ports
- PoE Feature: 240W (PoE Budget), Smart PoE
- L2 Features: Support 4094 VLAN IDs, 16K MAC Table
- Security: L2, L3, L4 ACLs, 802.1X Authentication (RADIUS, TACACAS+)
- Storm Control: Broadcast, Multicast and Unknown Unicast
- Management: CLI, Telnet, SSHv2, SNMP v1/v2/v3 and ZTP
- Temperature: Operating: 0 to 55 degree
- Power Input: 100V to 240V for AC and -44V to 57V for DC
Product Usage Instructions
Bracket Assembly
Steps to assemble brackets for rack mounting:
- Secure the brackets to the device using the supplied screws from the Mounting Accessory.
- Install the device in the rack using four rack-mounting screws. Ensure lower rack-mounting screws are secured first.
- If installing multiple switches, mount them one below the other in any order.
- Securely connect to the power source and turn it on to configure and operate.
Login Access
To access the Switch console, use RJ45 to DB9 serial port adapter with the following settings:
- Speed: 115200 bps
- Data bits: 8 Stop bit: 1
- Parity: none Flow control: Hardware
Applicable on
-
HSP-IO-8GE2S-C2PA
IO 8-Port PoE+ L2 Managed Switch with 2x1G SFP and 2x1G RJ45 Uplink ports and Single AC Power Supply -
HSP-IO-8GE2S-C2PD
IO, 8-Port, PoE+, L2 Managed Switch, 2x1G SFP + 2x1G RJ45 Uplinks, Single DC Power Supply -
HSP-IO-8GE2S-C2D
IO, 8-Port, Non-PoE, L2 Managed Switch, 2x1G SFP + 2x1G RJ45 Uplinks, Single DC Power Supply -
HSP-IO-8GE2S-C2A
IO, 8-Port, Non-PoE, L2 Managed Switch, 2x1G SFP + 2x1G RJ45 Uplinks, Single AC Power Supply -
Indigenously developed Secured Network OS
-
High-Speed Fiber & Copper based backhaul
-
Zero Touch Provisioning & Automation Capabilities
Introduction
Thank you for choosing the 8-port L2 commercial Switch from HFCL Switching Platform (HSP). PoE Variants Suitable in an enterprise/telco/campus environment to connect end PoE clients like Wi-Fi AP, CCTV, P2P, P2MP, IoT etc. Non-PoE Variants Suitable to connect Small Cells / BTS, P2P/P2MP etc. in a telco environment and Desktops/Servers, IP-Phone etc. in an Enterprise/ Campus environment.
Packaging Content
- 8 Port Switch Qty: 1 number
- Mounting clamps with screws
- AC Power Cord 1.5m (with AC variants)
- DC Connector (with DC variants)
Bracket Assembly
Assembly of brackets for Rack mounting described in below diagram for 4 Port L2 commercial switch Model
Bracket Assembly
- Step 1. Secure the brackets to the device using the supplied screws from the Mounting Accessory.
- Step 2. Install the device in the rack using four rack-mounting screws. Ensure that the lower rack-mounting screws are secured first to prevent the brackets from bending due to the switch’s weight.
- Step 3. If installing multiple switches, mount them in the rack, one below the other, in any order, maintaining required space for cabling.
- Step 4. Securely connect to power source and turn on to configure and operate.
Product specification
8 Port L2 Managed Switch Specifications
Capacity| Switching: 24 Gbps,
Forwarding: 17.86 mpps
---|---
Port Configuration| 8×10/100/1000 Base-T Gigabit Access Ports with PoE+ and
Non- PoE support
Uplink Ports| 2×10/100/1000 Base-T
2x1G SFP Gigabit Uplink Ports
PoE Feature| 240W (PoE Budget), Smart PoE
L2 features| Support 4094 VLAN IDs, 16K MAC Table
Security| L2, L3, L4 ACLs, 802.1X Authentication (RADIUS, TACACAS+)
Storm Control| Broadcast, Multicast and Unknown Unicast
Management| CLI, Telnet, SSHv2, SNMP v1/v2/v3 and ZTP
Temperature| Operating: 0 to 55 degree C
Power Input| 100V to 240V for AC and -44V to 57V for DC
Login access
The console access to the Switch can be obtained via the console port using RJ45 to DB9 serial port adapter. An administrator can access the device using command line interface (CLI) with the following console port setting as part of the factory default configuration.
- Speed: 115200 bps | Data bits: 8
- Stop bit: 1 | Parity: none
- Flow control: Hardware
Port LED status
| LED Label | LED Colour | Indication | Status |
|---|
ACT
| ****
Green/Yellow
| Yellow blinking| Non PoE with activity
Green blinking| POE ON with Activity
Solid Green| POE ON with no activity
OFF| Non-PoE with no activity
LINK
| ****
Green/Yellow
| Solid Green| Link Up at 1000Mbps speed
Solid Yellow| Link Up at 100Mbps speed
OFF| No Link
System LED status
| LED Label | LED Colour | Indication | Status |
|---|
SM
| ****
Blue
| OFF| Non PoE with activity
Blinking| POE ON with Activity
Solid ON| POE ON with no activity
ALM
| ****
Red
| OFF| No alarms reported
Blinking| Alarm reported
Solid ON| Critical alarm reported
Safety Precautions
Observe the following safety precautions to avoid damage to the Switch:
- Do not power the device during installation.
- Keep away from high voltage cables.
- Do not power off the unit in the middle of an upgrade process.
- Do not open the enclosure.
Contact Us:
- iosupport@hfcl.com
- hfcl.com | io.hfcl.com
- 8, Commercial Complex, Masjid Moth, Greater Kailash-II, New Delhi- 110048
HFCL Limited All Rights Reserved. HFCL and io by HFCL are trademarks or registered trademarks of HFCL Ltd. Specifications are subject to change without notice.
References
- HFCL | Leading Digital Network Solutions | Manufacturers of Optical Fiber Cables
- IO by HFCL: Transforming Telecom and Technology Solutions
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>